NuclearCraft · Progression · Intermediate
Nuclear Fuel Progression and Automation: From LEU-235 to Californium
In this guide, you will learn how to build a fully automated nuclear fuel recycling and isotope refinement facility in NuclearCraft. By linking the Isotope Separator, Fuel Reprocessor, and Decay Hastener, you will transform basic Uranium into high-tier Californium fuels for maximum fission reactor output and gain access to vital endgame crafting materials.
What you need
- At least one operational NuclearCraft Fission Reactor (sized and cooled for progressing fuel tiers)
- Isotope Separator
- Fuel Reprocessor
- Decay Hastener
- NuclearCraft Speed and Energy Upgrades
- Filterable item logistics (such as Ender IO Item Conduits, XNet, or Applied Energistics 2)
- High-capacity storage with void overflow (Storage Drawers or ME System)
- Radiation shielding or Hazmat Suit (plus RadAway and Rad-X for safety)
- Large supply of Uranium Ingots and Thorium Ingots
- Steady Forge Energy (FE) or RF power supply
Step by step
1Set Up Initial Uranium Separation
Place your Isotope Separator and connect it to your main power grid. Insert Uranium Ingots (or Uranium Oxide if you are using an oxidized fuel line) into the input slot. The machine will split the raw material into a large amount of fertile Uranium-238 and tiny Clumps of fissile Uranium-235. Combine nine Clumps of Uranium-235 into a single Uranium-235 isotope using a standard crafting grid or an auto-crafter.
Tip: Install Energy and Speed Upgrades early; isotope separation is the primary bottleneck of your initial fuel supply.
2Craft and Burn Your First LEU-235 Fuel
Combine one fissile Uranium-235 with eight fertile Uranium-238 in a crafting table to produce Low Enriched Uranium (LEU-235) Fuel. Alternatively, use four fissile and five fertile isotopes to make Highly Enriched Uranium (HEU-235), which burns hotter and yields slightly different byproduct ratios. Load the LEU-235 into your Fission Reactor and let it run through a full depletion cycle until it outputs Depleted LEU-235 Fuel.
Tip: Always check JEI for the exact base heat and power stats of a new fuel before inserting it into a reactor designed for weaker fuels.
3Automate the Fuel Reprocessor
Place a Fuel Reprocessor adjacent to your item logistics network and route all Depleted LEU-235 from your reactor directly into its input slot. The Reprocessor breaks depleted fuel down into up to four different isotope piles or clumps, such as Uranium-238, Plutonium-239, Plutonium-242, and Neptunium-237. Because the machine has multiple output slots, you must keep them clear; immediately extract all outputs into a dedicated buffer chest or Storage Drawer controller.
Tip: Open the machine GUI and configure the side IO settings to push outputs automatically, reducing the need for external extraction pipes.
4Establish the Auto-Compacting Loop
Many outputs from the Fuel Reprocessor and Isotope Separator come in the form of Tiny Clumps (1/9th of an isotope). Route all Tiny Clumps from your storage buffer into an auto-crafter or Compacting Drawers to automatically reform them into full-sized isotopes. Once compacted, route the fertile Uranium-238 back into your fuel-crafting supply, and store the newly acquired Neptunium and Plutonium isotopes in dedicated, filtered storage slots.
Tip: Compacting Drawers with Void Upgrades are ideal here, as they prevent excess Uranium-238 from clogging your entire recycling system.
5Advance to Neptunium and Plutonium Fuels (LEN and LEP)
With your recycled isotopes sorted, set up auto-crafting recipes for the next fuel tiers: Low Enriched Neptunium (LEN-236) and Low Enriched Plutonium (LEP-239 or LEP-241). Just like Uranium, these fuels require a mix of fissile and fertile isotopes (check JEI for the exact fissile-to-fertile combinations for each specific isotope number). Feed these new fuels into an upgraded Fission Reactor to produce Depleted LEN and Depleted LEP, and route them back into your Fuel Reprocessor.
Tip: Oxide, Nitride, and Zirconium-Alloy fuel variants offer different heat and efficiency multipliers; stick to one variant type across your automation chain to simplify logistics.
6Integrate the Decay Hastener for Unstable Isotopes
As you reprocess higher-tier fuels, you will accumulate surplus fissile or fertile isotopes that you do not immediately need, or isotopes that block progression. Place a Decay Hastener and use filtered item pipes to feed specific excess isotopes into it. The Decay Hastener rapidly forces radioactive isotopes down their natural decay chain into stable elements or different useful isotopes (for example, turning excess Americium or Curium isotopes into lower-tier missing links, or decaying Plutonium-238 and Polonium into Lead).
Tip: Use JEI to press 'U' (Uses) on any surplus isotope to see what it turns into inside a Decay Hastener before automating the pipe filter.
7Climb the Americium and Curium Tiers
Reprocessing Depleted Plutonium fuels yields Americium isotopes (Am-241, Am-242, Am-243). Craft these into LEA-242 or HEA-242 fuels, burn them in a high-cooling reactor, and reprocess the depleted outputs to obtain Curium isotopes (Cm-243, Cm-245, Cm-246, Cm-247). Continue expanding your filtered storage and auto-crafting patterns for LECm and HECm fuels, feeding the depleted results back into the central Fuel Reprocessor array.
Tip: As you climb tiers, radiation levels from loose isotopes increase significantly. Build this automation hub inside a chunk shielded with Lead Blocks or far away from your main base.
8Reach Berkelium and Californium
Burning and reprocessing Curium fuels will finally yield Berkelium (Bk-247, Bk-248), which in turn fuels the production of Californium isotopes (Cf-249, Cf-250, Cf-251, Cf-252) after one more reactor and reprocessing cycle. Set up a dedicated filtration line for Californium-250 and Californium-252, as these are prime endgame targets used either for extreme-power LECf/HECf reactor setups or for crafting high-tier Radioisotope Thermoelectric Generators (RTGs).
Tip: If you are short on a specific fissile isotope to complete a Berkelium or Californium fuel blend, check if a higher-tier isotope can be run through the Decay Hastener to step it back down.
How it works
NuclearCraft's fuel progression simulates real-world transmutation and the nuclear fuel cycle. In a Fission Reactor, you cannot simply burn pure fissile material without extreme heat penalties; instead, fuels are blended using a mix of one reactive 'fissile' isotope (like U-235 or Pu-239) and a surrounding matrix of 'fertile' isotopes (like U-238 or Pu-242). During the fission process inside the reactor, the fertile isotopes absorb stray neutrons and transmute into heavier elements with higher atomic numbers.
This transmutation is why the Fuel Reprocessor is the heart of the mod's progression. There is no natural Californium ore generating in the ground. To climb the periodic table from Uranium (atomic number 92) to Californium (atomic number 98), you must repeatedly subject fertile isotopes to neutron bombardment inside a reactor, then chemically separate the heavier transmuted byproducts in the Fuel Reprocessor.
The Decay Hastener acts as your balancing mechanism in this loop. While fission pushes isotopes 'up' the periodic table into heavier elements, the Decay Hastener pushes them 'down' by simulating alpha and beta decay. By combining upward transmutation in the reactor with downward decay in the Decay Hastener, you can navigate the entire isotope tree and convert useless radioactive waste into exact fissile or fertile components you need.
Common mistakes
- Allowing the Fuel Reprocessor output slots to jam. Every depleted fuel yields up to four distinct products. If even one output slot fills up (usually with common fertile isotopes like Uranium-238 or Plutonium-242), the entire machine halts. Always extract all outputs into a high-capacity drawer system with void upgrades.
- Putting higher-tier fuels into an unmodified starter reactor. As you move from LEU-235 to Plutonium, Curium, and Californium, the base heat generation per cell increases dramatically. Using advanced fuel in a basic reactor without recalculating your coolers will cause an immediate casing meltdown and release massive radiation.
- Forgetting to send Tiny Clumps through a compactor. Reprocessors output a mix of full items and Tiny Clumps. Failing to automatically craft 9 clumps into 1 full isotope will quickly flood your storage system with unusable fractional items.
- Sending the wrong isotopes into the Decay Hastener. Unfiltered pipes feeding a Decay Hastener will ruin your progression by decaying your hard-earned fissile isotopes into inert Lead or Bismuth. Only route specific excess isotopes to the Decay Hastener using strict whitelist filters.
- Ignoring radiation build-up in the automation chunk. Storing hundreds of Plutonium, Curium, and Californium isotopes in one place generates heavy background radiation over time. Always automate this process inside a radiation-shielded room and install Geigers or Radiation Scrubbers nearby.
FAQ
What is the difference between Low Enriched (LE) and Highly Enriched (HE) fuels?
LE fuels use 1 fissile isotope and 8 fertile isotopes, burning cooler and longer while producing more transmuted higher-tier elements per fissile item spent. HE fuels use 4 fissile and 5 fertile isotopes; they generate vastly more power and heat, deplete faster, and have different reprocessing yields. Check JEI for the exact output percentages of each.
Should I use Oxide, Nitride, or Zirconium-Alloy fuels for progression?
If your main goal is climbing the isotope tree to Californium quickly, standard un-alloyed or Oxide fuels are usually easiest to manage. However, crafting fuel pellets with Oxygen (in a Fluid Infuser), Nitrogen, or Zirconium changes their efficiency, heat, and critical mass stats. Note that Depleted Oxide fuels reprocess back into Oxide isotopes, which must be smelted if you want the pure metal form back.
What do I do with all the leftover Uranium-238 and Plutonium-242?
Keep a healthy buffer of fertile isotopes to blend with new fissile isotopes. Beyond that, you can craft Uranium-238 into radiation shielding, RTGs, or Dense/Heavy shielding blocks, or simply void the excess using a Void Upgrade in a Storage Drawer so your reprocessors never back up.
Why do I need Californium if I already have a working reactor?
Californium-250 allows you to craft Californium RTGs, which provide substantial, permanent, maintenance-free passive power without any heat or explosion risks. Additionally, Californium fuels offer some of the highest power density in the mod for late-game energy demands.
By linking your Fission Reactor to an automated loop of Fuel Reprocessors, compactors, and Decay Hasteners, you can seamlessly recycle nuclear waste and climb the transmutation tree from basic Uranium all the way to endgame Californium.