NuclearCraft · Getting started · Beginner
NuclearCraft Getting Started Guide: Ores, Early Machines, and Basic Processing
This guide walks you through the foundational phase of NuclearCraft, from mining your first nuclear ores to building the essential early-game processing machines. Mastering this setup is mandatory because you cannot build a functioning fission reactor without refined alloys, crushed dusts, and separated fuel isotopes. By the end of this walkthrough, you will have an automated line producing the Tough Alloy and basic fuel components required for your first nuclear power plant.
What you need
- Iron Pickaxe (or better) for mining early mod ores
- Diamond Pickaxe (or equal mining level) for Boron, Lithium, Thorium, and Uranium
- A reliable early-game Forge Energy (FE) or RF power generator (such as a basic coal generator from another tech mod, or NuclearCraft's Decay Generator)
- Plenty of Vanilla Iron, Gold, Redstone, Coal, and Lapis Lazuli
- Just Enough Items (JEI) installed to verify specific crafting recipes and alloy ratios
Step by step
1Mine the Eight Core NuclearCraft Ores
Head underground and gather the eight foundational ores added by the mod: Copper, Tin, Lead, Silver, Uranium, Thorium, Boron, and Lithium. Copper, Tin, and Lead spawn fairly frequently at medium depths, while Uranium, Thorium, Boron, and Lithium are rarer and typically require a Diamond-tier pickaxe to harvest down in the deeper strata. Collect at least half a stack of Lead, Boron, and Lithium, along with a massive supply of vanilla Iron and Coal.
Tip: If you find glowing Uranium or Thorium blocks, do not worry too much yet; raw ores in their unrefined state emit negligible radiation, though you should still store them in a chest away from your main bed.
2Craft Your Basic Machine Components
Before making machines, you must craft intermediate components like Basic Plating, Copper Solenoids, and Servomechanisms. Start by smelting Lead Ore in a standard furnace to get Lead Ingots, and smelt Coal or Graphite Dust to obtain Graphite Ingots. Combine Lead Ingots and Graphite in your crafting grid to create Basic Plating, which serves as the outer shielding for all tier-one NuclearCraft machinery. Check JEI for the exact arrangement to craft Machine Chassis, Copper Solenoids (using Copper and Iron), and Servomechanisms.
Tip: Craft these components in large batches, as every single processing block in NuclearCraft demands multiple plates and solenoids.
3Build and Power the Manufactory
The Manufactory is your primary ore crusher and must be your very first powered machine. Craft it by combining a Machine Chassis, Basic Plating, Redstone, and a Piston (check JEI for the exact recipe layout in your version). Place the Manufactory adjacent to your early-game power source or energy cable. Once it has power, feed it raw Coal and Iron to crush them into Coal Dust and Iron Dust, and use it to double your rare Boron and Lithium ores into two dusts per ore block.
Tip: You can also crush Cobblestone into Gravel and Sand, or crush Ender Pearls and Obsidian for later mid-game recipes.
4Construct the Alloy Furnace
Next, build the Alloy Furnace using a Machine Chassis, Bricks, Basic Plating, and Copper Solenoids. Place it next to your Manufactory on your power line. The Alloy Furnace takes two different metallic ingots or dusts and fuses them into specialized industrial metals. Start by feeding it Iron Ingots and Coal Dust (or Graphite Dust) to produce Steel Ingots, which form the backbone of mid-tier crafting.
Tip: The Alloy Furnace works faster and consumes less energy per operation if you feed it crushed dusts from your Manufactory rather than whole ingots.
5Produce Ferroboron and Tough Alloy
To build a Fission Reactor casing later, you need Tough Alloy, which requires a two-step smelting process in your Alloy Furnace. First, smelt your Boron Dust and Lithium Dust in a standard furnace to get Boron and Lithium Ingots. Next, put Steel Ingots and Boron Ingots into the Alloy Furnace to create Ferroboron Alloy. Finally, take that new Ferroboron Alloy and fuse it with Lithium Ingots inside the Alloy Furnace to produce Tough Alloy.
Tip: Always keep a dedicated chest of Steel, Ferroboron, and Tough Alloy; you will need dozens of Tough Alloy ingots just to frame a small starter reactor.
6Assemble the Isotope Separator
Your raw Uranium and Thorium cannot be burned directly in a reactor; they must be split into fertile and fissile isotopes. Craft the Isotope Separator using a Machine Chassis, Basic Plating, Servomechanisms, and Copper Solenoids, then hook it up to your power grid. Insert Uranium Ingots (or Uranium Dust from your Manufactory) into the input slot. The machine will slowly spin and split the material into large piles of Uranium-238 and tiny piles of fissile Uranium-235.
Tip: Process Thorium in the Isotope Separator first if you want a safer, cooler-running starter fuel (TBU Fuel) before jumping into higher-heat Uranium fuels.
7Install Speed and Energy Upgrades
By now you will notice that the Isotope Separator and Manufactory operate quite slowly at base speed. Use your Manufactory to crush Lapis Lazuli and Redstone/Gold (checking JEI for the exact dust requirements) to craft Speed Upgrades and Energy Upgrades. Open the GUI of your machines and insert these upgrades into the bottom-right upgrade slots. Balancing Speed Upgrades with Energy Upgrades prevents your early power grid from draining completely during heavy ore processing.
Tip: Never put a full stack of Speed Upgrades into a machine without Energy Upgrades, as the power consumption scales exponentially and will instantly stall your energy bank.
How it works
NuclearCraft progression is built around material refinement chains rather than simple one-step crafting. Raw ores dug from the earth are impure and structurally weak. The Manufactory breaks down crystalline and metallic structures into fine dusts, which both doubles your yield from mined ores and allows materials like Coal, Obsidian, and Gems to be chemically mixed with metals.
The Alloy Furnace applies high heat to combine the properties of different elements. For example, Boron is a natural neutron absorber, and Lithium has strong thermal properties; fusing them with Steel into Ferroboron and Tough Alloy creates a logical engineering material capable of withstanding the intense heat and radiation inside a Fission Reactor.
Finally, the Isotope Separator simulates centrifugal separation. Natural Uranium and Thorium consist mostly of stable, non-fissile isotopes with only a tiny fraction of reactive fissile material. The Separator extracts those rare fissile isotopes so you can recombine them in exact proportions to create usable nuclear fuel pellets.
Common mistakes
- Smelting Boron and Lithium ores directly in a vanilla furnace before building a Manufactory. Because Boron and Lithium are relatively rare and needed in massive quantities for Tough Alloy, always wait until you can double them into two dusts inside the Manufactory.
- Spamming Speed Upgrades without upgrading power generation. Speed Upgrades drastically increase the Forge Energy (FE/t) demand of a machine. Add only one or two at a time, and always pair them with Energy Upgrades.
- Ignoring radiation tooltips when stockpiling separated isotopes. While raw ore is fairly safe, piling up dozens of refined fissile isotopes (like Uranium-235 or Plutonium) in your inventory will quickly build up rads in your player chunk. Craft a Geiger Counter early and keep refined fuels in chests away from your main workspace.
- Forgetting that machine sides can be configured. If you try to automate your Alloy Furnace with hoppers and items will not go in, remember to open the machine GUI or use a Multitool to configure the input and output faces.
FAQ
Can I power NuclearCraft machines with energy from other mods?
Yes. NuclearCraft machines natively accept Forge Energy (FE), Redstone Flux (RF), IC2 EU, and GregTech EU, meaning you can use cables and generators from almost any popular tech mod.
How do I get Graphite for Basic Plating?
Simply smelt Coal or Charcoal—or better yet, crush Coal in a Manufactory to get Coal Dust and smelt that—in a standard vanilla Furnace to turn it into Graphite Ingots.
Why is my Alloy Furnace not smelting my two items together?
Make sure you have the exact ratio required by the recipe in JEI, ensure the machine has sufficient power, and check that the output slot is not blocked by a different type of alloy.
Do I need a hazmat suit just to mine Uranium and Thorium?
No, mining raw Uranium and Thorium ore emits very little radiation. You only need radiation protection or RadAway once you start separating large amounts of isotopes and running reactors.
By mining the eight core ores, doubling your yields in the Manufactory, fusing Tough Alloy in the Alloy Furnace, and enriching fuel in the Isotope Separator, you have established the complete industrial foundation needed to build your first NuclearCraft Fission Reactor.