Modular Force Field Systems (MFFS) · Setup guide · Advanced

MFFS Interdiction Matrix Guide: Automated Base Defense

Physical force fields keep intruders out, but the Interdiction Matrix controls what happens to anyone who actually manages to get inside your perimeter. In this advanced guide, you will learn how to construct and program an automated MFFS Interdiction Matrix capable of eliminating hostile mobs, neutralizing unauthorized players, restricting block interaction, and confiscating dangerous items on sight. Mastering this setup transforms your base from a passive bunker into an active, impenetrable fortress.

What you need

  • Voltaic API installed (required dependency for modern MFFS versions; check JEI for exact recipe integration)
  • An operational Fortron Network (Coercion Deriver, Fortron Capacitor, and steady power generation)
  • 1x Interdiction Matrix
  • 1x Biometric Identifier
  • Multiple Blank Cards (to craft Identification Cards and Frequency Cards)
  • Defense Modules: Anti-Personnel Module, Anti-Hostile Module, Block Access Module, Block Alter Module, and Confiscate Module
  • Scale Modules (to expand the active security radius)
  • Warn Modules (optional, to define a safe outer warning perimeter)
  • 1x Chest or large inventory container

Step by step

  1. 1Establish Your Biometric Whitelist

    Before activating any lethal defense systems, you must ensure the system recognizes you as the owner. Place a Biometric Identifier near your Fortron Capacitor and link them to the same frequency using a Frequency Card. Hold a Blank Card in your hand and right-click yourself (or place it inside the Identifier slot) to encode your username onto an Identification Card. Insert your personal Identification Card into the Master slot of the Biometric Identifier, or grant yourself full permissions including 'Bypass Interdiction Matrix' in the GUI.

    Tip: Always complete and double-check this step before powering the Matrix, or your own defense grid will immediately kill you and confiscate your gear.

  2. 2Position and Link the Interdiction Matrix

    Place the Interdiction Matrix in the center of the area you wish to protect, as its operational area expands outward radially from the block itself. Take a Blank Card, shift-right-click your Fortron Capacitor to bind its frequency, and place that Frequency Card into the bottom-left frequency slot of the Interdiction Matrix. Ensure the Matrix is within the transmission range of your Capacitor so it begins receiving Fortron fluid.

    Tip: Hide the Matrix deep underground or inside a small bedrock-strength force field cube so intruders cannot simply mine the defense block.

  3. 3Expand the Action and Warning Radii

    Open the Interdiction Matrix GUI and locate the module upgrade slots. Insert Scale Modules to increase the 'Action Range'—the lethal zone where rules are strictly enforced. If you want to give visitors a fair chance to turn back, insert Warn Modules as well. The Warn Modules extend a secondary radius beyond the Action Range that broadcasts a chat warning to approaching players without immediately harming them.

    Tip: Check the GUI text hover or JEI to see how many blocks each Scale Module adds in your specific modpack configuration, as larger zones drain Fortron exponentially faster.

  4. 4Install Mob and Anti-Personnel Defense Modules

    To automate physical combat, place an Anti-Hostile Module into one of the Matrix's module slots; this will instantly vaporize any hostile monsters that spawn or wander into the action radius. For PvP or server protection, insert an Anti-Personnel Module. This module targets any player entering the Action Range who does not have explicit bypass clearance registered in your linked Biometric Identifier, killing them instantly regardless of their armor.

    Tip: If you maintain animal farms inside your base, avoid inserting the Anti-Friendly Module, as it will slaughter your livestock.

  5. 5Lock Down Block Interaction and Griefing

    If you want to allow guests into your base without letting them steal or grief, remove the Anti-Personnel Module and instead insert the Block Alter Module and Block Access Module. The Block Alter Module prevents unauthorized players from breaking or placing blocks inside the field. The Block Access Module locks all GUIs, stopping visitors from opening your chests, furnaces, or MFFS machines.

    Tip: You can customize individual player permissions in the Biometric Identifier if you want a friend to open chests (Access) without letting them remodel your walls (Alter).

  6. 6Configure Automatic Item Confiscation

    Insert a Confiscate Module into the Matrix to strip unauthorized items from intruders' inventories. You can leave the Matrix's central filter slots empty to confiscate every single item a trespasser carries, or place specific problematic items (like TNT, wireless remotes, or high-tier weapons) into the filter grid. Keep an eye on the toggle button in the GUI to switch the filter between Whitelist (only allow these items) and Blacklist (only take these items) modes.

  7. 7Attach Storage and Activate the Matrix

    Place a Chest or modded storage container directly adjacent to the Interdiction Matrix. When the Confiscate Module or Anti-Personnel Module strips items from a player, the Matrix automatically deposits the seized loot into this adjacent inventory instead of deleting it. Once your modules, whitelist, and storage are in place, apply a Redstone signal (such as a Lever) to the Interdiction Matrix or toggle the redstone control in its GUI to bring the defense grid online.

    Tip: Connect an item extraction pipe to the confiscation chest to automatically route stolen contraband into a secure storage room.

How it works

Unlike a Force Field Projector, which spends Fortron to materialize physical barrier blocks in the world, the Interdiction Matrix operates as an invisible, region-scanning TileEntity. At regular tick intervals, it defines a bounding box around itself based on the number of installed Scale Modules and scans all entities and player interactions within that volume.

When the Matrix detects a player inside its Action Range, it queries the linked Fortron network for a Biometric Identifier on the same frequency. It compares the player's identity against the cards stored in the Identifier. If the player lacks the bypass permission, the Matrix sequentially executes the logic of every installed module—checking inventory slots against the confiscation filter, cancelling block-break events, or applying direct void/system damage to execute the target.

Because the Matrix does not maintain physical blocks, its baseline idle Fortron consumption is relatively low compared to a massive force field. However, every active enforcement action—such as killing a mob, stripping an item, or blocking a chest click—triggers an immediate spike in Fortron drain from the linked Capacitor.

Common mistakes

  • Powering the Matrix before configuring the Biometric Identifier: This is the classic MFFS blunder. If the Matrix turns on before your ID card is registered on the same frequency, it treats you as an intruder, kills you, and puts your inventory into the adjacent chest.
  • Forgetting to attach an inventory for confiscation: If you use the Confiscate Module or Anti-Personnel Module without placing a chest directly touching the Matrix, confiscated items may be destroyed or spilled haphazardly depending on version behavior.
  • Over-scaling the Matrix without upgrading Fortron production: Packing the Matrix with dozens of Scale Modules creates a massive scan zone that drains significant Fortron per tick. If your Coercion Derivers cannot keep up, the Capacitor will empty and the defense grid will shut down silently.
  • Confusing Whitelist and Blacklist modes on the Confiscate Module: Leaving the filter on Whitelist with no items inside means no items are allowed, stripping players completely naked. Always test your filter with a trusted friend using wooden tools before relying on it.

FAQ

Why is my Interdiction Matrix not working even though it has a lever turned on?

Check three things: ensure it has a valid Frequency Card matching your Fortron Capacitor, verify the Capacitor actually has enough Fortron stored, and check that the Biometric Identifier is linked to that exact same frequency.

Can an intruder survive the Anti-Personnel Module with strong modded armor?

In most situations, no. The Anti-Personnel Module is designed to bypass standard armor mitigation by applying severe direct damage or forcing health depletion directly until the unauthorized player dies.

Does the Interdiction Matrix stop creepers or TNT explosions from outside the zone?

No. The Matrix only affects entities and player actions inside its scan radius. To stop external projectiles, TNT cannons, or block damage, you must combine the Matrix with a physical Force Field Projector.

How do I retrieve items taken by the Confiscate Module?

Simply open the chest or storage container placed directly adjacent to the Interdiction Matrix block; all seized items are automatically transferred there.

By properly pairing an Interdiction Matrix with a Biometric Identifier and a steady Fortron supply, you can enforce complete automated law and order over your base's territory.

More Modular Force Field Systems (MFFS) guides

Modular Force Field Systems (MFFS) · Getting startedModular Force Field Systems (MFFS) Getting Started GuideThis guide will walk you through the fundamentals of Modular Force Field Systems (MFFS), from mining your first specialized crystals to projecting an impenetrable barrier around your base. Mastering these force fields is essential for defending your territory against hostile mobs, unwanted animals, and rival players.Beginner7 steps
Modular Force Field Systems (MFFS) · PowerMFFS Fortron Energy & Coercion Deriver ExplainedThis guide explains how to generate Fortron energy using the Coercion Deriver in Modular Force Field Systems (MFFS). Mastering this foundational mechanic is essential because all force fields, projectors, and defense matrices in the mod rely exclusively on Fortron to operate rather than standard modded electricity.Beginner7 steps
Modular Force Field Systems (MFFS) · Setup guideHow to Link Fortron Capacitors & Manage FrequenciesIn Modular Force Field Systems (MFFS), Fortron energy is the lifeblood of your base's defense network, powering everything from massive protective barriers to security hubs. Because MFFS machines do not use physical cables to transfer Fortron, learning how to wireless link your Fortron Capacitors using Frequency Cards is the most important first step. This guide will teach you how to set up a wireless Fortron network, link your machines, and balance the energy load so your force fields never fail.Beginner7 steps
Modular Force Field Systems (MFFS) · Setup guideForce Field Projector Setup Guide: Shapes, Modes & ScalingMastering the Force Field Projector in Modular Force Field Systems (MFFS) allows you to construct impenetrable energy shields tailored to the exact dimensions of your base. This guide teaches you how to establish a Fortron network, select projection geometries like spheres, cubes, and pyramids, and manipulate them in 3D space using directional upgrade modules. By understanding the coordinate logic behind scaling, translation, and rotation, you can protect irregular builds without wasting valuable resources or power.Intermediate7 steps
Modular Force Field Systems (MFFS) · ProgressionMFFS Projector Modules & Upgrades Progression GuideThis guide walks you through upgrading a basic Modular Force Field Systems (MFFS) shield into an advanced, multi-functional defense and utility barrier. By mastering projector modules like Disintegration, Camouflage, and Fusion, you can transform a simple Fortron wall into an automated mining rig, an underwater base drainer, or a hidden lethal trap.Intermediate7 steps
Modular Force Field Systems (MFFS) · Setup guideHow to Setup a Biometric Identifier & Base Security NetworkSecuring your base with a solid energy barrier is only half the battle; you also need a reliable way for yourself and trusted allies to walk through without shutting down the entire defense grid. This guide covers how to deploy a Biometric Identifier, encode player ID cards, and establish a seamless base security network in Modular Force Field Systems (MFFS). By the end, your force fields and Interdiction Matrices will automatically recognize authorized personnel while actively repelling or eliminating intruders.Intermediate6 steps