Modular Force Field Systems (MFFS) · Setup guide · Intermediate
Force Field Projector Setup Guide: Shapes, Modes & Scaling
Mastering the Force Field Projector in Modular Force Field Systems (MFFS) allows you to construct impenetrable energy shields tailored to the exact dimensions of your base. This guide teaches you how to establish a Fortron network, select projection geometries like spheres, cubes, and pyramids, and manipulate them in 3D space using directional upgrade modules. By understanding the coordinate logic behind scaling, translation, and rotation, you can protect irregular builds without wasting valuable resources or power.
What you need
- Voltaic API (required dependency for modern versions of MFFS)
- A solid Forge Energy (FE) or compatible power generator
- 1x Coercion Deriver
- 1x Fortron Capacitor
- 1x Force Field Projector
- 2x Blank Cards (to create Frequency Cards)
- Projector Mode Items: Sphere Mode, Cube Mode, or Pyramid Mode
- Manipulation Modules: several Scale Modules, Translation Modules, and Rotation Modules
- Optional utility upgrades: Speed Modules (for faster generation) and Camouflage Module
- 1x Lever or Redstone Torch
Step by step
1Establish the Fortron Power Network
Place your Coercion Deriver next to your power cables and set your Fortron Capacitor within a few blocks of it. MFFS machines do not run directly on standard Forge Energy; instead, the Coercion Deriver converts standard electrical power into a specialized fluid-like energy called Fortron. Place the Force Field Projector near the Capacitor where you want the center of your shield system to originate.
Tip: You do not need pipes to transfer Fortron between machines; the Fortron Capacitor transmits it wirelessly to linked devices within its range.
2Link Machines with Frequency Cards
Open the Fortron Capacitor GUI and place a Blank Card into the frequency slot to encode it with a random frequency, or shift-right-click to bind the cards manually depending on your exact mod version. Insert a matching Frequency Card into the frequency slot of both the Coercion Deriver and the Force Field Projector. Apply a Redstone signal to the Coercion Deriver and Fortron Capacitor to start producing and broadcasting Fortron across this shared frequency.
Tip: Always keep a spare encoded Frequency Card in a chest in case you need to add an Interdiction Matrix or secondary projector to the same network later.
3Insert a Projector Mode Shape
Open the Force Field Projector GUI and locate the central slot surrounded by directional arrows. Insert a Sphere Mode, Cube Mode, or Pyramid Mode item into this central slot. This item defines the mathematical blueprint of your shield, though at this stage the field will have a radius of zero and will not generate any visible blocks.
Tip: Cube Mode is ideal for standard boxy buildings, Sphere Mode works best for floating islands or towers, and Pyramid Mode is great for decorative roof shielding.
4Expand the Shield with Scale Modules
Locate the directional slots inside the Projector GUI, which correspond to the six cardinal directions (North, South, East, West, Up, Down). Place Scale Modules into these directional slots to stretch the force field outward from the projector in those specific directions. Alternatively, placing Scale Modules in the general matrix slots on the side will expand the field uniformly along all axes at once.
Tip: Check JEI or the in-game tooltip to verify whether the slots in your version are labeled by compass direction or relative machine orientation.
5Offset the Center Using Translation Modules
If your Force Field Projector is hidden in a basement rather than the exact center of your base, use Translation Modules to shift the entire field without moving the machine. Place Translation Modules into the directional slots (Up, North, East, etc.) to push the virtual center point of the force field away from the projector block by one block per module. This allows you to align a cube or pyramid shield cleanly with your existing walls and floors.
Tip: Use Translation Modules to shift the bottom edge of a Cube Mode shield slightly underground so mobs or players cannot dig beneath your wall.
6Angle the Shield with Rotation Modules
For diagonal builds or diamond-shaped perimeters, insert Rotation Modules into the directional slots to pivot the force field along its X, Y, or Z axes. Each module rotates the projected blueprint by a set number of degrees around the translated center point. Note that rotating a Sphere Mode does nothing noticeable, whereas rotating a Cube Mode or Pyramid Mode drastically alters which blocks are covered.
Tip: Rotating a shield creates stair-stepped voxel edges, which may slightly increase the total block count and Fortron upkeep cost.
7Boost Projection Speed and Activate
Large force fields consist of thousands of individual barrier blocks, which can take a very long time to materialize at base speed. Place Speed Modules into the general upgrade matrix on the right side of the Projector GUI to allow the machine to place multiple force field blocks per tick. Finally, place a Lever on the Force Field Projector and flick it on to begin projecting the barrier.
Tip: Watch your Fortron Capacitor storage level when adding Speed Modules; if projection speed outpaces your Coercion Deriver production, the shield will stutter and stall.
How it works
The Force Field Projector operates like a 3D holographic printer using vector mathematics. By itself, the projector only knows its own coordinates in the world. When you insert a mode item (Sphere, Cube, or Pyramid), the machine runs a geometric equation centered at (0,0,0) relative to the projector block to calculate which block coordinates in the world should be filled with barrier blocks.
The directional slots in the GUI act as modifiers to that mathematical equation before the blocks are actually placed in the world. Translation Modules add an offset to the origin point (moving the 0,0,0 center elsewhere). Scale Modules multiply the distance from that new origin point along specific axes, letting you turn a symmetrical cube into a flat rectangular wall or an elongated tunnel, or stretch a sphere into an oval dome. Rotation Modules apply a rotational matrix to the final coordinates.
Every individual force field block maintained in the world imposes a continuous Fortron drain per tick, and breaking or generating blocks costs a burst of Fortron. Therefore, scaling a shield up exponentially increases surface area and energy consumption. The Fortron Capacitor acts as the central router, pulling stored Fortron from the Coercion Deriver and distributing it wirelessly to all machines sharing the exact same Frequency Card.
Common mistakes
- Placing Scale Modules only in one direction by accident, which results in a flat 2D plane or a 1-block thin line instead of a 3D hollow enclosure around your base.
- Forgetting to power both the Fortron Capacitor and the Force Field Projector with a Redstone signal; MFFS machines remain dormant by default until activated by Redstone.
- Stuffing dozens of Speed Modules into the Projector without upgrading the Coercion Deriver, draining the Fortron buffer instantly and causing the shield to flicker on and off.
- Trapping yourself inside a solid force field by forgetting to leave an entry mechanism or failing to realize that by default, the field is hollow on the inside once scaled properly.
FAQ
Why is my Force Field Projector not projecting anything even though it has a Mode and Scale Modules?
Check three things: ensure all machines have matching Frequency Cards, verify the Fortron Capacitor has stored Fortron and is set to distribute power, and confirm the Projector itself is receiving an active Redstone signal from a Lever or Torch.
Can I make a rectangular room instead of a perfect square with the Cube Mode?
Yes. Instead of putting Scale Modules in the general upgrade slots (which scales all sides equally), place different amounts of Scale Modules into the specific directional slots (for example, 10 North/South, 20 East/West, and 6 Up/Down).
How do I walk through my own force field once it is active?
You can either wire an exterior wireless redstone toggle to turn the projector off briefly, use a Biometric Identifier and Interdiction Matrix setup on the same frequency to grant yourself bypass permissions, or use a field modification module like a Tube or Dome module to create openings.
How do I hide the bright blue force field texture so it looks like normal blocks?
Craft a Camouflage Module and place it into the Force Field Projector upgrade matrix alongside a standard solid building block (like Stone Bricks or Glass) in the designated filter slot to disguise the shield.
By combining a stable Fortron network with Mode shapes and directional Scale, Translation, and Rotation Modules, you can sculpt custom force fields to defend any base layout in Modular Force Field Systems.