Mekanism · Power · Advanced

Mekanism Fusion Reactor Guide: D-T Fuel & Laser Ignition Setup

Mastering the Mekanism Fusion Reactor is the ultimate endgame milestone, providing millions of FE/t to power massive industrial bases and the Supercritical Phase Shifter. This guide breaks down the entire automated infrastructure required to refine Deuterium and Tritium, charge a Hohlraum, align a high-energy Laser Amplifier ignition system, and push your reactor to its absolute maximum energy output.

What you need

  • Mekanism and Mekanism Generators installed
  • Polonium Pellets (requires a working Fission Reactor and Solar Neutron Activator / Isotopic Centrifuge setup)
  • 36 to 40 Fusion Reactor Frame blocks (reduced by the number of Ports and Laser Matrix used)
  • 1 Fusion Reactor Controller
  • 1 Laser Focus Matrix
  • At least 3 Fusion Reactor Ports (for fuel inputs and power output)
  • Reactor Glass (optional, for visibility on non-structural faces)
  • 1 Hohlraum
  • Multiple Electric Pumps with Filter Upgrades
  • 1 Electrolytic Separator
  • 2 Thermal Evaporation Plants (18 blocks tall recommended, heated by Resistive Heaters or Fuelwood Heaters)
  • Chemical Condensentrators and Rotary Condensentrators
  • Multiple Solar Neutron Activators
  • 1 Chemical Infuser (for direct D-T Fuel mixing)
  • 1 Laser Amplifier and several Lasers
  • Ultimate Pressurized Tubes, Mechanical Pipes, and Universal Cables
  • Configurator

Step by step

  1. 1Construct the Fusion Reactor Multiblock

    Build a hollow 5x5x5 sphere-like structure where each face is a 5x5 plus-sign shape (cutting out the edges and corners of a standard cube). Place the Fusion Reactor Controller in the exact center of the top face. Install one Laser Focus Matrix in the center of one side face, and place at least three Fusion Reactor Ports on the remaining faces. Fill the rest of the required structural wireframe with Fusion Reactor Frames, and use Reactor Glass or extra Frames for the inner 3x3 cross of each face; red particles will appear when the structure validly forms.

    Tip: Use your Configurator in 'Configurate (Fluids/Gases/Energy)' mode and shift-right-click one of the Fusion Reactor Ports to turn it into an Output mode port for extracting power.

  2. 2Set Up Deuterium Production

    Place a large pool of infinite water and submerge multiple Electric Pumps above water source blocks. Install a Filter Upgrade inside each Electric Pump alongside Speed and Energy Upgrades; the Filter Upgrade specifically instructs the pump to extract Heavy Water instead of regular Water. Pipe the Heavy Water using Mechanical Pipes into an Electrolytic Separator to split it into Deuterium and Oxygen.

    Tip: Set the Oxygen side of the Electrolytic Separator to 'Dump Excess' in its GUI so the machine never halts Deuterium production due to a full secondary tank.

  3. 3Build the Tritium Refinement Chain

    Construct two maximum-height (18-block tall) Thermal Evaporation Plants. Pump regular water into the first plant to produce Brine, then pipe that Brine into the second plant to distill it into Liquid Lithium. Route the Liquid Lithium into a Rotary Condensentrator set to 'Decondensentrating' mode to turn it into Lithium gas. Finally, transport the Lithium gas via Pressurized Tubes into an array of Solar Neutron Activators with unobstructed views of the sky to convert it into Tritium.

    Tip: Attach an external Resistive Heater to a Thermal Evaporation Valve on each plant and feed it power to maintain maximum temperature, allowing continuous production even at night or in cold biomes.

  4. 4Mix D-T Fuel and Fill the Hohlraum

    Pipe your newly created Deuterium and Tritium gases into the two inputs of a Chemical Infuser to combine them into D-T Fuel. Place an empty Hohlraum inside the item slot of the Chemical Infuser (or a Rotary Condensentrator fed with D-T Fuel) to fill it completely with D-T Fuel. Do not connect the mixed D-T Fuel pipe to the reactor yet; start by piping pure Deuterium and pure Tritium separately into two of your Fusion Reactor's input ports so the reactor builds an internal reserve.

    Tip: Check JEI for the exact capacity of the Hohlraum, and keep a filled backup Hohlraum in a chest in case your fuel supply ever runs dry and the reactor extinguishes.

  5. 5Align the Laser Ignition Array

    Place a Laser Amplifier a few blocks away from the reactor, ensuring its red dot output face points directly into the Laser Focus Matrix on your reactor wall. Set the Laser Amplifier's Redstone Control to 'High' (or 'Pulse') so it holds its charge instead of firing continuously. Place several Lasers pointing into the remaining flat sides of the Laser Amplifier and supply them with massive amounts of power via Universal Cables.

    Tip: Laser beams can damage and kill players Instantly; encase the beam path in glass or place the Laser Amplifier flush against the Laser Focus Matrix to prevent accidental deaths.

  6. 6Charge the Amplifier and Ignite the Reactor

    Open the Laser Amplifier GUI and let it accumulate energy until it stores at least 400 MFE (1 Billion Joules); verify the exact ignition threshold in your in-game guide or GUI as modpack configs can vary. Open the Fusion Reactor Controller GUI, set the Injection Rate to 2 (the minimum sustainable rate), and place your D-T Fuel-filled Hohlraum into the center slot. Apply a Redstone signal (such as a button press) to the Laser Amplifier to fire the stored beam into the Laser Focus Matrix and ignite the fusion reaction.

    Tip: The Hohlraum is consumed upon successful ignition, and the reactor GUI will immediately display a burning plasma animation.

  7. 7Scale to Maximum FE/t with Direct D-T Fuel Injection

    Once ignited, the reactor will generate substantial passive power by fusing the separate Deuterium and Tritium inputs according to your set Injection Rate (up to 98 mb/t in standard passive mode). To reach the absolute maximum late-game FE/t output, connect a third Pressurized Tube carrying pre-mixed D-T Fuel directly from your Chemical Infuser into a reactor input port. When fed pre-mixed D-T Fuel directly, the reactor overrides the standard injection limit and consumes up to 1,000 mb/t (500 mb/t of each component gas), skyrocketing energy production into the tens of millions of FE/t.

    Tip: Before connecting direct D-T Fuel, ensure your Deuterium and Tritium production lines are scaled up massively (dozens of pumps, multiple evaporation towers, and large arrays of Solar Neutron Activators) with massive Dynamic Tank buffers, or the reactor will drain your reserves in seconds and shut down.

How it works

The Mekanism Fusion Reactor operates on heat-driven plasma confinement rather than fissile decay. Unlike the Fission Reactor, the Fusion Reactor cannot melt down or explode if things go wrong; if it runs out of fuel, it simply cools down and stops generating power. However, because initiating fusion requires overcoming immense atomic repulsion, the reactor cannot start cold. It requires two simultaneous triggers: a Hohlraum pre-loaded with D-T Fuel placed in the core, and an instantaneous thermal shock delivered via the Laser Focus Matrix.

During normal operation, you feed Deuterium and Tritium into the reactor separately. The reactor mixes them internally at a user-defined Injection Rate (from 2 to 98 mb/t), converting plasma heat directly into Forge Energy (FE), which can be extracted directly from an output port via Universal Cables. You can also pump water into the reactor to generate colossal amounts of Steam for an Industrial Turbine while still getting direct power.

The secret to maximum output lies in bypassing the internal mixing throttle. When you pipe pre-mixed D-T Fuel directly into the reactor along with pure Deuterium and Tritium, the reactor consumes the D-T Fuel at an uncapped rate conditioned by plasma temperature (up to 1,000 mb/t). Because fuel consumption scales linearly with energy output, this method multiplies the reactor's power generation by roughly tenfold, at the cost of requiring an industrial-scale chemical production backbone.

Common mistakes

  • Forgetting the Filter Upgrade in Electric Pumps: Without a Filter Upgrade installed inside the pump's upgrade menu, it will pull regular Water instead of Heavy Water, stalling your entire Deuterium line.
  • Firing the Laser continuously instead of in a single pulse: If you do not set the Laser Amplifier to wait for a Redstone signal, it will trickle weak energy into the reactor continuously, which dissipates faster than it can reach the ignition threshold.
  • Directly injecting D-T Fuel without sufficient production infrastructure: Connecting a D-T Fuel line immediately drains up to 1,000 mb/t. If your production cannot sustain this rate, the reactor will burn through all fuel in ticks and extinguish, forcing you to waste another Hohlraum and re-charge the laser.
  • Chunk-loading failures across the pipeline: Because Solar Neutron Activators, Thermal Evaporation Plants, and the Reactor occupy a large footprint, having part of the fuel setup in an unloaded chunk will starve the reactor and shut it down when you travel away.
  • Starving Tritium production at night: Solar Neutron Activators only work during daytime with clear skies. Always place a large Dynamic Tank or chain of Ultimate Pressurized Tubes between your Activators and the reactor to buffer enough Tritium to survive through the night and rainstorms.

FAQ

Can the Fusion Reactor explode or irradiate my base like the Fission Reactor?

No. The Fusion Reactor is completely safe. It uses no radioactive materials in its fuel cycle and cannot explode or melt down under any circumstances.

Why did my reactor stop running overnight?

Solar Neutron Activators stop producing Tritium at night and during rain. If your storage buffer isn't large enough to cover the downtime, the reactor will run out of Tritium and extinguish.

Should I air-cool the reactor or water-cool it for an Industrial Turbine?

Air-cooling (dry operation) produces millions of FE/t directly with minimal lag and footprint. Water-cooling generates even more power when paired with a maximum-size Industrial Turbine, so use air-cooling first and add water cooling only if you need absurd energy levels.

Can I put Solar Neutron Activators in the Nether or End for 24/7 Tritium?

In the Nether, there is no sky access above the bedrock ceiling in normal survival, so they will not work. However, in the End (or evergreen daytime dimensions in certain modpacks), check your modpack configuration, as standard Mekanism requires a valid daytime sun cycle.

By automating Heavy Water extraction and Lithium refinement, buffering gases against nighttime pauses, and igniting a Hohlraum with a 400+ MFE Laser Amplifier burst, you unlock Mekanism's safest and most powerful multi-million FE/t generator.

More Mekanism guides

Mekanism · Getting startedMekanism Getting Started Guide: From Osmium to Tier UpgradesStarting out in Mekanism can seem intimidating due to its sprawling tech tree, but the entire mod revolves around a single foundational machine. In this guide, you will learn how to mine Osmium, build your very first Metallurgic Infuser, craft essential alloys, and upgrade your basic machines into multi-slot Factories. Mastering these early steps lays the groundwork for automated ore multiplication, jetpacks, and advanced reactors.Beginner7 steps
Mekanism · ExplainedMekanism Machine Side Configuration & Transporters ExplainedMastering Mekanism's side configuration and transport pipes is the foundational skill required to automate everything from basic ore doubling to massive factories. In this guide, you will learn how to read Mekanism's color-coded Input/Output interface, automate item movement using Auto-Eject, and use the Configurator tool to control pipes and machines directly in the world. Understanding these core logistics mechanics will save you from tangled pipe spaghetti and broken automation setups.Beginner7 steps
Mekanism · Addon guideMekanism Generators Guide: How to Build an Ethylene Gas-Burning Power PlantThis guide teaches you how to transition from early-game Wind Generators to a fully automated, self-sustaining Ethylene Gas-Burning Power Plant using the Mekanism Generators addon. Mastering this setup is essential because Ethylene provides a massive, reliable mid-game power boost capable of running heavy machinery like the Digital Miner and advanced ore processing factories.Beginner8 steps
Mekanism · Setup guideHow to Use and Filter the Digital Miner in MekanismThe Digital Miner is Mekanism's premier automated excavation machine, allowing you to targetedly extract specific ores from the ground without destroying the surrounding landscape. By mastering its advanced filtering system and power management, you will secure a practically infinite supply of raw materials to feed your high-tier ore processing factories.Intermediate7 steps
Mekanism · Setup guideMekanism Ore Processing Guide: 2x, 3x, 4x, and 5x Setups Step-by-StepSmelting raw ores directly in a standard furnace wastes a massive amount of your hard-earned mining yields. This guide walks you through Mekanism's modular ore processing chain, taking you from basic 2x ore doubling all the way to an automated, chemical-fueled 5x ore quintupling factory. Mastering this pipeline ensures you have the thousands of ingots required for late-game reactors and digital mining.Intermediate6 steps
Mekanism · AutomationMekanism QIO Storage Network & Auto-Crafting GuideOnce you reach Mekanism's late-game progression, traditional chest networks and long pipe corridors quickly become an unorganized mess. This guide will walk you through setting up a wireless Quantum Item Orchestration (QIO) network and linking it to a Formulaic Assemblicator and Logistical Sorter to create a cable-free storage and passive auto-crafting system.Intermediate8 steps