Extreme Reactors · Addon guide · Intermediate

Bigger Reactors & Legacy Big Reactors: Differences & Mechanics Guide

As the original 1.7.10 Big Reactors evolved into modern Minecraft versions, it split into two distinct lineages: ZeroNoRyouki's Extreme Reactors and RogueLogix's Bigger Reactors. Understanding the mechanical differences between these versions—from simulation algorithms to unique multiblocks like the Heat Exchanger and Fluidizer—will prevent you from wasting resources on outdated reactor designs. This guide breaks down how to identify which version you are playing and how to adapt your engineering strategies accordingly.

What you need

  • Either Extreme Reactors (with ZeroCore) or Bigger Reactors (with Phosphophyllite) installed in your modpack
  • JEI (Just Enough Items) and Patchouli (if using Extreme Reactors) for checking version-specific recipes
  • Basic reactor components: Reactor Casings, Fuel Rods, Control Rods, and a Reactor Controller
  • Raw fuel materials: Yellorium or Uranium ingots, Graphite/Coal, and Iron
  • Fluid pipes and energy cables capable of handling high-throughput Forge Energy (FE)

Step by step

  1. 1Identify Your Mod Lineage in JEI

    Open your inventory and type '@reactors' into the JEI search bar to determine which fork your modpack uses. If you see Basic and Reinforced tiers of Reactor Casings along with machines like the Reprocessor or Fluidizer, you are playing modern Extreme Reactors. If you see the Heat Exchanger, Cyanite Reprocessor (single-block), and Liquid Obsidian moderator options, you are playing the Bigger Reactors fork. If you are on Minecraft 1.7.10 with Redstone Flux (RF) Taps, you are on legacy Big Reactors.

    Tip: Check the tooltip of a Fuel Rod; Extreme Reactors separates components into 'Basic' and 'Reinforced' tiers, whereas Bigger Reactors and legacy Big Reactors use a single universal casing tier.

  2. 2Adapt to Casing Tiers in Extreme Reactors

    If you are using modern Extreme Reactors, do not attempt to build a massive reactor or add a Fluid Port right away. Basic Reactor Casings have strict size limits (typically 5x5x5) and can only operate passively to generate Forge Energy directly. To build larger setups or actively cooled steam reactors, you must first upgrade your production to craft Reinforced Reactor Casings.

    Tip: Legacy Big Reactors and Bigger Reactors do not have casing tiers, allowing you to build massive active reactors immediately if you have the raw iron and graphite.

  3. 3Choose the Correct Moderator Strategy

    In legacy 1.7.10 Big Reactors and Extreme Reactors, internal ray-tracing checks cardinal directions (North, South, East, West) up to four blocks away from each Fuel Rod. Place high-tier moderators like Diamond Blocks, Emerald Blocks, or Resonant Ender directly in the orthogonal lines between rods, and use cheap Graphite Blocks in the diagonal corners. If you are playing Bigger Reactors, its Phosphophyllite engine simulates radiation in 3D space across diagonals as well, meaning you must fill the entire interior with high-quality moderators for maximum efficiency.

    Tip: Always check JEI or the Patchouli manual to verify which fluids or blocks are valid moderators in your specific modpack, as pack authors frequently customize these values.

  4. 4Set Up Active Cooling: Direct Steam vs. Heat Exchanger

    For legacy Big Reactors and Extreme Reactors (using Reinforced parts), place Reactor Fluid Ports directly on the reactor casing: pump Water in and extract Steam straight to your Turbine. However, if you are playing later versions of Bigger Reactors, direct water cooling may be replaced by a closed coolant loop. In that setup, you must build a separate Heat Exchanger multiblock, circulating superheated liquid (like Liquid Sodium or Superheated Coolant) from the reactor through the Heat Exchanger's condenser channels to boil water into steam externally.

    Tip: In Bigger Reactors, make sure your Heat Exchanger's hot coolant loop and cold water loop do not cross into the wrong fluid ports, or the system will stall.

  5. 5Reprocess Cyanite Waste into Blutonium

    Regardless of the version, burning Yellorium produces Cyanite waste, which must be recycled into Blutonium. In legacy Big Reactors and Bigger Reactors, craft a single-block Cyanite Reprocessor, supply it with power and water, and insert two Cyanite ingots. In modern Extreme Reactors, you must construct a 3x3x7 multiblock Reprocessor using Reprocessor Casings, placing the Waste Injector on the very top face and the Collector on the bottom face.

  6. 6Utilize Advanced Fuel Mixing in Extreme Reactors

    While Bigger Reactors and legacy Big Reactors stop their fuel progression at solid Blutonium, modern Extreme Reactors introduces liquid fuels and higher-tier reactants. Construct the Fluidizer multiblock using Fluidizer Casings, Solid/Fluid Injectors, and a Fluidizer Controller. By installing two Solid Injectors on the Fluidizer, you can melt and combine Yellorium and Blutonium into high-yield liquid fuels like Verderium, which are pumped into the reactor via a Fuel Injection Port.

    Tip: Burning Blutonium in Extreme Reactors produces Magentite waste, while Verderium produces Rossinite waste; filter your output ports accordingly.

  7. 7Select Version-Specific Turbine Coils

    When building a Turbine to process your steam, your endgame coil material depends heavily on the mod version. In legacy Big Reactors, Ludicrite is the top-tier coil block. In modern Extreme Reactors, you can progress past Ludicrite by crafting Ridiculite and Inanite blocks inside the Fluidizer and Reprocessor chains for massive FE generation. In Bigger Reactors, look for compatibility coils from other mods (like Mekanism's Refined Obsidian or Thermal's Enderium) as defined by your modpack.

    Tip: Check the '/er coils' command or your in-game guidebook if you have operator permissions to see exact coil efficiency ratings in Extreme Reactors.

How it works

All mods in the Big Reactors family rely on the same fundamental physics loop: Fuel Rods emit fast radiation during fission, which travels outward through the interior grid. Moderators (blocks or fluids inside the casing) slow down this fast radiation into slow radiation. When slow radiation hits another Fuel Rod, it triggers additional fission, increasing fuel efficiency and lowering waste.

The key divergence lies in how the simulation math is executed. Legacy 1.7.10 Big Reactors and modern Extreme Reactors use a cardinal ray-tracing approximation: each tick, the game picks a Fuel Rod and traces a ray in one of the four compass directions for up to four blocks. Because rays never travel diagonally, blocks placed diagonally to Fuel Rods never interact with radiation and only conduct heat to the casing.

Bigger Reactors was rewritten from scratch on the Phosphophyllite core to overhaul this simulation. It introduces full 3D radiation attenuation and multi-step thermal transfer, meaning diagonal blocks actually moderate radiation, and fuel rods have a realistic thermal transfer limit to their surrounding environment. This is why Bigger Reactors also introduced the Heat Exchanger multiblock, separating the nuclear core's primary coolant loop from the secondary steam-generation loop, much like a real-world pressurized water reactor.

Common mistakes

  • Leaving diagonal interior spaces empty in Bigger Reactors: While cardinal-only ray-tracing in Extreme Reactors lets you use cheap blocks or air in the diagonals without losing radiation efficiency, Bigger Reactors calculates 3D diagonals and will penalize your fuel burn rate if left unmoderated.
  • Trying to build a 32x32x32 reactor with Basic Casings in Extreme Reactors: Modern Extreme Reactors enforces strict dimension limits on Basic Reactor Casings; always craft Reinforced Casings before scaling up.
  • Using solid Access Ports for fluid fuels in Extreme Reactors: Liquid fuels made in the Fluidizer cannot be inserted through standard Reactor Access Ports; you must install Reactor Fuel Injection Ports set to Inlet and Outlet modes.
  • Assuming legacy 1.7.10 online reactor simulators apply to modern versions: Older web-based simulators use hardcoded 1.7.10 math and will give inaccurate RF/FE and steam numbers for both Extreme Reactors 2.0+ and Bigger Reactors.

FAQ

Why can I not find the Cyanite Reprocessor single-block machine in Extreme Reactors?

In modern Extreme Reactors (1.16.5+), the single-block machine was removed and replaced by a 3x3x7 multiblock structure called the Reprocessor. You must build it using Reprocessor Casings, a Waste Injector on top, and a Collector on the bottom.

Does the Heat Exchanger exist in Extreme Reactors?

No, the Heat Exchanger multiblock is exclusive to the Bigger Reactors fork. In Extreme Reactors, you pump water directly into a Reinforced Reactor's Fluid Port to generate steam without an intermediate coolant loop.

Can I still use Gelid Cryotheum and Resonant Ender as moderators?

Yes, if Thermal Series is installed in your modpack, both forks typically register these fluids as high-tier moderators. However, in modern versions without Thermal, solid blocks like Diamond, Emerald, or mod-specific metals often serve as the best readily available moderators.

What is the difference between RF Taps and FE Power Taps?

Legacy 1.7.10 Big Reactors used Redstone Flux (RF) Taps. Modern Extreme Reactors and Bigger Reactors natively use Forge Energy (FE) Power Taps, which automatically connect to almost all modern tech mod cables without needing energy converters.

By identifying whether your modpack uses legacy Big Reactors, the realistic Bigger Reactors fork, or the fuel-expanded Extreme Reactors port, you can tailor your moderator layout, casing progression, and steam loops for maximum power generation.

More Extreme Reactors guides

Extreme Reactors · Getting startedExtreme Reactors Getting Started: How to Build Your First Basic ReactorIn this guide, you will learn how to construct and operate your first Basic Reactor in the Extreme Reactors mod, scaling from a starter 3x3x3 cube up to an efficient 5x5x5 cooled generator. Mastering this multiblock machine provides a massive, reliable supply of Forge Energy (FE) early on, eliminating power bottlenecks as you transition away from basic coal generators.Beginner8 steps
Extreme Reactors · ExplainedReactor Coolants & Radiation Moderation ExplainedMastering reactor coolants and radiation moderation in Extreme Reactors is the key to multiplying your Forge Energy output while drastically cutting down on Yellorium or Blutonium consumption. Instead of building larger, fuel-hungry shells, you will learn how to optimize the interior grid using the right solid and liquid moderators. This guide breaks down the hidden physics of radiation fertility, heat transfer, and fuel burnup so you can engineer peak-efficiency multiblocks.Intermediate7 steps
Extreme Reactors · AutomationHow to Automate Reactors: Control Rods & Redstone Ports GuideRunning an Extreme Reactor at full capacity all the time quickly burns through your Yellorium reserves, even when your base is not actively drawing power. In this guide, you will learn how to install Reactor Redstone Ports to create an automated feedback loop that throttles Control Rod insertion or toggles the reactor on and off based on its internal energy buffer. Mastering this automation ensures your power grid remains fully charged while reducing wasted fuel to nearly zero.Intermediate6 steps
Extreme Reactors · PowerHow to Build a Steam Turbine & Actively Cooled Reactor SetupPassive reactors are great for early-to-mid game power, but converting your setup to an actively cooled system paired with a Reinforced Turbine unlocks vastly superior fuel efficiency and extreme Forge Energy (FE) output. In this guide, you will learn how to retrofit a Reinforced Reactor to produce steam, construct a high-RPM Reinforced Turbine, and create a closed-loop water recycling system.Advanced7 steps
Extreme Reactors · ExplainedTurbine Coils & RPM Sweet Spots Explained (Ludicrite, Ridiculite, Inanite)Mastering Extreme Reactors turbines allows you to transform reactor steam into massive amounts of Forge Energy far more efficiently than passive reactors. By balancing rotor blades, steam flow rates, and advanced coil blocks like Ludicrite, Ridiculite, and Inanite, you can lock your turbine into the 900 or 1800 RPM efficiency sweet spots to generate well over 100,000 FE/t.Advanced7 steps
Extreme Reactors · Setup guideHow to Build and Automate the Reprocessor (Cyanite to Blutonium)In this guide, you will learn how to construct and automate the Reprocessor multiblock in Extreme Reactors to recycle depleted Cyanite Ingots into high-yield Blutonium fuel. Mastering this vertical processing tower allows you to turn reactor waste into advanced fission materials and high-tier turbine components instead of letting it pile up in storage.Intermediate7 steps