Galacticraft Legacy · Early game
Galacticraft Self-Sustaining Lunar Biodome & Oxygen Hub
Establish a permanently breathable, pressurized survival outpost on the Moon using Galacticraft Legacy. This self-sustaining biodome leverages vanilla oak trees and Advanced Solar Panels to generate a continuous supply of oxygen without burning through consumable bone meal or fuel. Building this early-game life support hub frees you from wearing heavy oxygen gear indoors while providing a reliable station to refill your portable tanks.
- Footprint
- 11x11x7 blocks
- Power
- Low continuous draw (Check JEI for your pack's gJ/t rates)
- Throughput
- Sustains up to 800 blocks of breathable interior volume
- Difficulty
- beginner
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Advanced Solar Panel | 2 |
| Energy Storage Module | 2 |
| Oxygen Collector | 1 |
| Oxygen Storage Module | 1 |
| Oxygen Sealer | 1 |
| Oxygen Compressor | 1 |
| Air Lock Frame | 7 |
| Air Lock Controller | 1 |
| Aluminum Wire | 24 |
| Fluid Pipe | 16 |
| Sealable Aluminum Wire | 1 |
| Sealable Fluid Pipe | 1 |
| Tin Decoration Block (or solid hull blocks) | 350 |
| Vanilla Glass Block | 64 |
| Dirt | 4 |
| Oak Sapling | 4 |
| Oak Leaves (or Bone Meal to grow saplings) | 60 |
| Torch (Vanilla, for tree growth light) | 4 |
Build it step by step
1Construct the Sealed Biodome Hull
Build an 11x11x7 hollow dome or box using solid blocks like Tin Decoration Blocks and Vanilla Glass Blocks for the ceiling. Ensure every edge and corner is filled with solid full blocks, as diagonal gaps or partial blocks like stairs and slabs will leak oxygen into the lunar vacuum.
2Install the Air Lock Entry
On one wall, construct a 3x4 vertical frame using 7 Air Lock Frames and 1 Air Lock Controller. Open the controller's GUI and set it to open on player proximity or a redstone signal so you can enter and exit the dome without depressurizing the room.
3Plant the Indoor Oxygen Grove
In the center of the biodome, place 4 Dirt blocks and plant Oak Saplings, or manually stack at least 60 sheared Oak Leaves connected to a central wood log so they do not decay. Place standard torches nearby to provide light for sapling growth before the room is oxygenated.
4Position the Oxygen Collector
Place the Oxygen Collector directly adjacent to or underneath the leaf cluster. The collector scans a 10x10x10 area around itself for leaves or growing crops; ensure at least 50 to 60 leaf blocks sit within this radius for maximum oxygen generation.
5Set Up Exterior Solar Power
Outside the dome on a flat surface, place 2 Advanced Solar Panels with an unobstructed view of the sky. Connect their output sockets using Aluminum Wire to a Sealable Aluminum Wire block embedded directly in the biodome wall.
6Wire the Interior Energy Grid
Inside the dome, connect the Sealable Aluminum Wire to 2 Energy Storage Modules chained in series to buffer power across the long lunar night. Run Aluminum Wire from the storage modules' output sides to the power inputs of the Oxygen Collector, Oxygen Sealer, and Oxygen Compressor.
7Plumb the Oxygen Distribution Loop
Attach Fluid Pipes from the gas output of the Oxygen Collector into the input side of the Oxygen Storage Module. From the storage module's output, split the Fluid Pipe line to feed both the Oxygen Sealer and the Oxygen Compressor.
8Pressurize and Test the Dome
Ensure the top face of the Oxygen Sealer is completely unobstructed by blocks or wires. Once powered and supplied with gas, check the Oxygen Sealer GUI until the status reads 'Sealed', indicating the interior atmosphere is breathable and safe to remove your mask.
How it works
This setup exploits Galacticraft Legacy's non-destructive leaf collection mechanic to create an infinite life-support loop. While saplings will not grow in a vacuum, manually placed leaf blocks connected to logs—or saplings grown after an initial burst of bone meal—generate oxygen passively without being consumed. The single Oxygen Collector continuously harvests this passive aura from surrounding Oak Leaves and pumps raw oxygen into the Oxygen Storage Module.
Routing the gas through an Oxygen Storage Module first acts as a critical survival buffer. The lunar day-night cycle is very long compared to the Overworld, meaning solar power stops for extended periods. By buffering both electrical energy in Energy Storage Modules and gas in the Oxygen Storage Module, the Oxygen Sealer maintains room pressure continuously until sunrise. Meanwhile, surplus oxygen automatically diverts to the Oxygen Compressor so you can keep Heavy Oxygen Tanks topped up for surface mining excursions.
Upgrades and scaling
- Replace standard Aluminum Wire and machines with Heavy Aluminum Wire and Tier 2 Energy Storage Clusters once you acquire Desh on Mars.
- Add a Thermal Padding Controller (Ambient Thermal Controller) into the Oxygen Sealer slot once you reach Mars to regulate extreme environmental temperatures.
- Expand the biodome volume by placing a second Oxygen Sealer adjacent to the first; each additional sealer expands the maximum sealable room volume cleanly.
- Integrate an Oxygen Bubble Distributor on the roof for temporary exterior breathable work zones around your rocket launchpad.
Common mistakes
- Routing standard Aluminum Wire or Fluid Pipes through the outer walls instead of using Sealable Aluminum Wire and Sealable Fluid Pipes, which breaks the airtight seal.
- Placing Oak Leaves without connecting them to an Oak Wood log, causing the leaves to decay in a vacuum and suffocating the base while you are away.
- Using vanilla doors, trapdoors, or glass panes in the exterior hull, none of which are recognized as airtight by the Oxygen Sealer.
- Blocking the top vent of the Oxygen Sealer with a wire, torch, or ceiling block, which immediately prevents it from scanning and sealing the room.
FAQ
Why do my torches keep turning into unlit torches inside the dome?
Vanilla torches extinguish instantly in a vacuum. Either use Galacticraft Glowstone Torches during construction, or wait until the Oxygen Sealer status shows 'Sealed' before placing regular torches.
How many leaf blocks do I need for one Oxygen Sealer?
Check your Oxygen Collector and Sealer GUIs for exact usage rates, as modpack configs vary, but roughly 45 to 60 leaf blocks within a 5-block radius of the collector will easily outpace a single Oxygen Sealer and fill your backup storage.
Why does the Oxygen Sealer say 'Unsealed - Area too large'?
A single Oxygen Sealer can only pressurize roughly 800 blocks of open air volume. Either shrink the interior dimensions of your biodome, divide it into smaller rooms with Air Locks, or place a second powered Oxygen Sealer inside the same room.