Galacticraft Legacy · Mid game
Galacticraft Automated Fuel Refinery & Wafer Fabrication Plant
Preparing for lunar and interplanetary exploration in Galacticraft Legacy requires vast quantities of refined rocket fuel, precision wafers, and durable hull plating. This mid-game facility combines an automated crude oil refinery with a parallel fabrication line for Silicon Wafers and Heavy-Duty Plates. Building this centralized hub ensures your space program never stalls due to missing circuit boards, rocket fuselage materials, or launch fuel.
- Footprint
- 9x5x4 blocks
- Power
- ~600 gJ/s (approx. 350 FE/t) at full load
- Throughput
- Steady batch production (check JEI for exact cycle times)
- Difficulty
- intermediate
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Advanced Solar Panel | 2 |
| Energy Storage Module | 1 |
| Heavy Aluminum Wire | 24 |
| Refinery | 1 |
| Fuel Loader | 1 |
| Fluid Tank | 2 |
| Fluid Pipe | 10 |
| Circuit Fabricator | 1 |
| Electric Arc Furnace | 1 |
| Electric Compressor | 1 |
| Hopper | 8 |
| Chest | 6 |
| Lever | 1 |
Build it step by step
1Establish the Power Spine
Place your Energy Storage Module at the back-center of the 9x5 footprint. Erect two Advanced Solar Panels behind it with a clear view of the sky, connecting their outputs to the storage module's input socket using Heavy Aluminum Wire. Ensure the panels have unobstructed daylight access so they can track the sun.
2Run the Main Power Bus
Extend a line of Heavy Aluminum Wire along the floor horizontally from the Energy Storage Module's output side. This acts as your central power bus. Leave space directly in front of the wire to place your four primary processing machines so their green energy sockets align with the cable.
3Set Up the Fuel Refinery Line
On the left side of the power bus, place the Refinery and connect its power socket to the Heavy Aluminum Wire. Place a Fluid Tank next to it to hold harvested Crude Oil, and run Fluid Pipes from the tank into the Refinery's input side. Attach a lever to the pipe or configure the pipe using a Standard Wrench to pull fluid into the machine.
4Connect the Fuel Loader
Place the Fuel Loader adjacent to your Rocket Launch Pad, within reach of the refinery wing. Run Fluid Pipes from the Refinery's fuel output side directly into the Fuel Loader, and connect the Fuel Loader to the Heavy Aluminum Wire bus. Once powered, it will automatically transfer refined fuel into any rocket docked on the pad.
5Install the Wafer Fabrication Unit
In the center of the power bus, place the Circuit Fabricator. Because the Circuit Fabricator has multiple distinct internal slots (Diamond, Raw Silicon, Redstone, and modifier items like Redstone Torches), place hoppers pointing into both the top and side faces of the machine. Test a single item first to verify which hopper face feeds which internal slot in your version, as directional slot mapping is strict.
6Build the Smelting and Compression Line
On the right wing of the power bus, place the Electric Arc Furnace followed by the Electric Compressor, leaving a one-block gap for a transfer hopper or placing the Furnace slightly elevated. The Electric Arc Furnace doubles ore output and smelts fast, feeding ingots directly into an intermediate chest or straight into the Electric Compressor to press Compressed Steel, Bronze, and Aluminum.
7Configure Outputs and Collection
Place hoppers underneath the Circuit Fabricator and the Electric Compressor, routing them into a central double chest at the front of the build. You can easily pull compressed plates from this chest and feed them back into the Electric Compressor's input chest to craft Heavy-Duty Plates for your Tier 1 and Tier 2 rockets.
How it works
This setup consolidates the three slowest bottlenecks of Galacticraft Legacy—fuel refining, circuit fabrication, and metal compression—onto a single Heavy Aluminum Wire power backbone. The Advanced Solar Panels generate energy during the day and buffer it inside the Energy Storage Module. Unlike standard machines in other mods, Galacticraft machines have dedicated color-coded ports on their casings: green squares for power input, and blue or red connections for fluid handling. Aligning all machines along a rear power trench keeps wiring tidy and minimizes energy loss.
On the fluid side, Crude Oil collected from underground pockets or surface geysers is dumped into the input Fluid Tank. Galacticraft Fluid Pipes move the raw oil into the Refinery, which slowly cracks it into golden Rocket Fuel. By piping this directly into an adjacent Fuel Loader, you eliminate the tedious process of manually filling dozens of Empty Canisters by hand. Meanwhile, the solid fabrication side operates in parallel via vanilla hoppers. The Circuit Fabricator consumes Raw Silicon, Redstone, and Diamonds to stamp out Basic and Advanced Wafers, while the Electric Arc Furnace and Electric Compressor work in tandem to refine ores and stamp multiple metal ingots into dense plates simultaneously.
Upgrades and scaling
- Upgrade the Energy Storage Module to an Energy Storage Cluster once you unlock Advanced Wafers to store significantly more power for overnight operations.
- Replace the vanilla hoppers on the Electric Compressor with a pipe or logistics mod that supports crafting templates, as compressing Tier 1 Heavy-Duty Plates requires exact batches of Compressed Steel, Aluminum, and Bronze in the 3x3 internal grid.
- Add a second Electric Compressor dedicated solely to single-ingot plates (like Compressed Iron, Tin, and Copper) so you do not have to constantly clear the 3x3 grid when switching to multi-metal Heavy-Duty Plates.
- Supplement the Advanced Solar Panels with a Coal Generator or connect compatible Forge Energy (FE/RF) cables directly to the Heavy Aluminum Wire line for 24/7 operation during rain or night cycles.
Common mistakes
- Connecting power wires to the wrong side of a Galacticraft machine; always rotate the machine with a Standard Wrench so the green power socket directly faces your Heavy Aluminum Wire.
- Using basic Aluminum Wire instead of Heavy Aluminum Wire for the main bus, which can bottleneck power delivery when the Electric Arc Furnace and Electric Compressor run simultaneously.
- Dumping mixed ingots blindly into the Electric Compressor without matching recipe ratios; leftover odd ingots will clog the 3x3 internal grid and prevent Heavy-Duty Plates from forming.
- Allowing open flames or ignition sources near unsealed Crude Oil tanks or pools, or forgetting to switch Fluid Pipes to extraction mode with a wrench when moving oil into the Refinery.
FAQ
Can I power this setup using RF or FE from other tech mods?
Yes. Galacticraft Legacy natively converts Forge Energy (FE) and Redstone Flux (RF) into Galacticraft Joules (gJ). Simply connect your external mod cables directly to the Heavy Aluminum Wire or the input side of the Energy Storage Module.
How do I automate the 3x3 grid inside the Electric Compressor for Heavy-Duty Plates?
The Electric Compressor places incoming items into its internal 3x3 grid sequentially. If using vanilla hoppers, feed equal stacks of Compressed Steel, Compressed Aluminum, and Compressed Bronze one type at a time so each metal fills three slots, and check JEI for the exact recipe ingredients.
Why isn't my Fuel Loader filling my rocket?
The Fuel Loader must be placed directly adjacent to the 3x3 Rocket Launch Pad (touching one of the outer pad blocks), must have power, and you must press the 'Load Fuel' button inside its GUI if it is not already toggled active.