Tech Reborn · Mid game

Tech Reborn Automated Quarry & Multiblock Ore Processing Factory

This automated mining and refining facility pairs a Tech Reborn Quarry directly with multiblock processing machines to extract and refine raw resources without manual intervention. By routing excavated ores through an Industrial Grinder and an Industrial Blast Furnace, you maximize your ingot yield while collecting valuable secondary dusts needed for advanced alloys. Building this at the mid-game stage completely eliminates manual mining and creates a steady supply of refined metals like Aluminum, Titanium, and Refined Iron.

Footprint
13x9x6 blocks
Power
~512 to 1024 E/t at full load (check JEI for exact recipe costs)
Throughput
~1-2 ores/sec depending on upgrades
Difficulty
intermediate

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

Medium Voltage Energy Medium Voltage Energy Medium Voltage Energy Medium Voltage Energy Low Voltage Energy (E)Low Voltage Energy (E)Raw Ores & CobblestoneCobblestone, Dirt & GeRaw Metal Ores & BauxiWaterStandard Metal DustsBauxite Dust & ByproduGalena & High-Temp DusAluminum & Titanium DuHigh-Tier Ingots (AlumStandard Ingots (Iron,MFEPOWERLV TransformerPOWERQuarryINPUTBuffer Chest & SortingHoppersLOGISTICSDrain (Infinite WaterSource)INPUTIndustrial GrinderMACHINEIndustrial ElectrolyzerMACHINEIndustrial Blast FurnaceMACHINEElectric FurnaceMACHINEMedium Storage UnitArrayOUTPUT
InputMachinePowerLogisticsOutputItemFluidEnergy

Materials

ItemCount
Quarry1
Mining Tube64
Industrial Grinder1
Standard Machine Casing18
Reinforced Machine Casing8
Industrial Blast Furnace1
Advanced Machine Casing16
Industrial Electrolyzer1
Electric Furnace2
MFE1
LV Transformer1
Insulated Gold Cable32
Insulated Copper Cable16
Drain1
Medium Storage Unit8
Hopper14
Chest4
Overclocker Upgrade8
Water Bucket2
Lava Bucket2

Build it step by step

  1. 1Position the Quarry and Buffer Storage

    Place the Quarry block over a resource-rich area and insert a stack of Mining Tubes into its internal slot. Place a double Chest directly on top of or adjacent to the Quarry to act as the main item buffer. Configure the Quarry's mining range via its GUI to start the excavation boundary.

  2. 2Construct the Industrial Grinder Multiblock

    Build the 3x3x3 casing structure for the Industrial Grinder nearby. The bottom and top layers each require 9 Standard Machine Casings. The middle layer consists of 8 Reinforced Machine Casings around the perimeter with 1 Water source block placed in the exact hollow center. Attach the Industrial Grinder controller block to the front middle casing.

  3. 3Supply Water to the Grinder

    Create a 3x1 infinite water pool next to the Industrial Grinder and submerge a Tech Reborn Drain block into the center water block. Configure the Drain or connect it directly to the Industrial Grinder so it continuously pumps Water into the machine's internal fluid tank, as most grinding recipes consume water per operation.

  4. 4Construct the Industrial Blast Furnace

    Build a 3x4x3 tower of casings for the Industrial Blast Furnace. Depending on your current resource tier, use Standard, Reinforced, or Advanced Machine Casings to achieve the necessary heat capacity (check JEI for the exact heat requirement of Aluminum or Titanium). Leave the two interior center blocks hollow and fill both with Lava source blocks, then attach the Industrial Blast Furnace controller to the bottom-center front face.

  5. 5Place Auxiliary Refining Machines

    Set down your Electric Furnaces and the Industrial Electrolyzer next to the multiblocks. The Electric Furnaces will handle basic dusts like Iron, Copper, and Tin, while the Industrial Electrolyzer is vital for breaking down Bauxite Dust and Pyrite Dust into usable smeltable dusts.

  6. 6Wire the Power Grid

    Place your MFE as the central power hub and run Insulated Gold Cables (Medium Voltage) directly to the Quarry, Industrial Grinder, and Industrial Blast Furnace. Connect the MFE to the high-voltage side of an LV Transformer, then run Insulated Copper Cables (Low Voltage) from the low-voltage sides to the Electric Furnaces and the Industrial Electrolyzer to prevent them from exploding.

  7. 7Configure Item Routing and Storage

    Connect Hoppers from the Quarry buffer chest to route raw ores into the Industrial Grinder while diverting bulk Cobblestone and Dirt into an array of Medium Storage Units. Use additional Hoppers and Tech Reborn machine slot I/O configurations (the wrench/gear tab in each machine's GUI) to auto-output ground dusts from the Grinder into the Electric Furnaces, Electrolyzer, and Blast Furnace, finally dumping all finished ingots into your output Storage Units.

How it works

The core logic of this factory revolves around the Industrial Grinder's ability to turn a single raw ore block into multiple primary dusts plus rare byproduct dusts. When the Quarry mines downward using Mining Tubes, it ejects everything into the top buffer. Basic block waste like Cobblestone and Dirt are immediately siphoned off into bulk Medium Storage Units so they do not clog the processing line. Meanwhile, raw ores enter the Industrial Grinder, which uses a steady supply of water from the Drain to wash and crush the ores for maximum yield.

Once crushed, the dusts must take three distinct paths based on their metallurgical properties. Standard dusts (Iron, Gold, Copper, Tin, Lead) cannot benefit from high-heat smelting, so they are routed directly into standard Electric Furnaces for fast conversion into ingots. Complex mineral dusts like Bauxite Dust are diverted into the Industrial Electrolyzer, which separates them into Aluminum Dust and Tiny Piles of Titanium Dust.

Finally, those volatile dusts from the Electrolyzer—along with direct grinder outputs like Galena Dust—are fed into the Industrial Blast Furnace. The dual-lava-core multiblock provides the extreme heat rating required to smelt Aluminum, Steel, and Titanium. By splitting the workload between standard Electric Furnaces and the high-drain Industrial Blast Furnace, you save massive amounts of energy and prevent bottlenecks in your smelting queue.

Upgrades and scaling

  • Replace the Standard Machine Casings on the Industrial Blast Furnace with Advanced Machine Casings and install Kanthal Heating Coils or Nichrome Heating Coils to reach the heat capacity needed for Tungsten and Iridium processing.
  • Install Overclocker Upgrades into the Quarry, Electric Furnaces, and Industrial Grinder to dramatically increase mining and processing speed once your power generation can handle the extra load.
  • Upgrade the Quarry's internal drill head to a Fortune-tier drill attachment (check JEI for exact drill upgrade tiers) to multiply gem and dust drops before they even hit the Industrial Grinder.
  • Swap out the MFE and Insulated Gold Cables for an MFSU and Insulated HV Cables to support heavy overclocking across the entire factory.

Common mistakes

  • Connecting the MFE directly to the Electric Furnace or Industrial Electrolyzer without an LV Transformer or Transformer Upgrades—supplying Medium Voltage (128 E/t) to Low Voltage (32 E/t) machines will cause them to explode immediately.
  • Forgetting to place the actual Water block inside the hollow center of the Industrial Grinder or the two Lava blocks inside the Industrial Blast Furnace; the multiblocks will not form or function without their core fluids in place.
  • Confusing the multiblock core water of the Industrial Grinder with its recipe water tank—you still need to pump water continuously into the Grinder's fluid input for recipes to process.
  • Failing to configure the auto-input and auto-output faces inside the Tech Reborn machine GUIs, which leaves items stuck inside the Hoppers or machine output slots.

FAQ

Why does my Industrial Blast Furnace say it doesn't have enough heat for Aluminum or Titanium?

The heat capacity of the Industrial Blast Furnace depends on the tier of Machine Casings used to build the 3x4x3 structure and whether you have added internal heating coils. Upgrade your Standard Machine Casings to Reinforced or Advanced Machine Casings and check JEI for the exact heat value required by your recipe.

Why is my Quarry powered on but not mining any blocks?

Make sure you have inserted Mining Tubes into the Quarry's dedicated tube slot and that the chunk is loaded. The Quarry needs to extend a physical pipe down to the ground level before it can begin excavating.

How do I stop my machines from exploding when I upgrade my power grid?

Tech Reborn uses a strict voltage tier system (Low, Medium, High, Extreme). Either step down the current using an LV or MV Transformer before the cable reaches the machine, or insert Transformer Upgrades directly into the machine's upgrade slots.

More Tech Reborn designs