Immersive Engineering · Late game
Immersive Petroleum Pumpjack & Distillation Tower Complex
This late-game industrial complex combines Immersive Engineering with the Immersive Petroleum addon to extract massive quantities of Crude Oil directly from bedrock reservoirs. The extracted oil is refined through a towering Distillation Tower into Diesel, Gasoline, Lubricant, and Bitumen. This setup provides an enormous, self-sustaining power loop via Diesel Generators while simultaneously automating high-tier crafting materials and Napalm production.
- Footprint
- 21x15x16 blocks
- Power
- Net positive (~8-12 kFE/t surplus after running machines; check JEI for your pack's config)
- Throughput
- Continuous refining of ~15-50 mB/t Crude Oil depending on reservoir pressure
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Engineer's Hammer | 1 |
| Core Sample Drill | 1 |
| Steel Scaffolding | 68 |
| Light Engineering Block | 13 |
| Heavy Engineering Block | 21 |
| Redstone Engineering Block | 5 |
| Generator Block | 4 |
| Radiator Block | 9 |
| Fluid Pipe | 64 |
| Iron Sheetmetal | 168 |
| Iron Sheetmetal Slab | 33 |
| Treated Wood Fence | 20 |
| Fluid Pump | 5 |
| Fluid Router | 1 |
| HV Capacitor | 4 |
| HV Wire Connector | 10 |
| HV Wire Relay | 16 |
| HV Wire Coil | 32 |
| Conveyor Belt | 4 |
| Chest | 2 |
| Redstone Lever | 5 |
Build it step by step
1Locate an Oil Reservoir
Before building, power a Core Sample Drill across several chunks to locate an underground Crude Oil reservoir. Once you find a chunk with a high yield, clear a flat 21x15 area down to a solid foundation to host the refinery complex.
2Construct the Pumpjack
Assemble the 6x4x3 Pumpjack multiblock directly inside the oil-bearing chunk using Steel Scaffolding, Light and Heavy Engineering Blocks, Fluid Pipes, and Sheetmetal. Form the structure by striking the designated block with your Engineer's Hammer. Extend a column of Fluid Pipes from the center-bottom port of the Pumpjack all the way down to the bedrock block to establish extraction access.
3Erect the Distillation Tower
Adjacent to the Pumpjack, build the massive 4x4x16 Distillation Tower using Steel Scaffolding, Heavy Engineering Blocks, Redstone Engineering, Fluid Pipes, and Iron Sheetmetal Slabs. Strike the structure with the Engineer's Hammer to complete it. Leave ample clearance around the base for fluid routing and item extraction.
4Set Up Buffer Tanks and Fluid Routing
Construct four Sheetmetal Tanks (each 3x3x5 on Treated Wood Fence legs): one for incoming Crude Oil, and three for the outputs (Diesel, Gasoline, and Lubricant). Place a Fluid Pump between the Pumpjack output and the Crude Oil tank, and another feeding from the Crude Oil tank into the Distillation Tower input port.
5Configure the Fluid Router and Bitumen Output
The Distillation Tower outputs multiple fluids from a single port in rapid succession. Attach a Fluid Router directly to the tower's fluid output port and use buckets of Diesel, Lubricant, and Gasoline to filter each respective directional side toward its dedicated Sheetmetal Tank. Place a Conveyor Belt at the item output port on the tower's base leading into a Chest to catch the solid Bitumen byproduct.
6Build the Diesel Generator Power Loop
Construct at least one 3x5x3 Diesel Generator near the Diesel Sheetmetal Tank using Radiator Blocks, Generator Blocks, and Heavy Engineering Blocks. Pipe the Diesel from the tank into the generator's side inputs. Connect the top electrical outputs of the Diesel Generator to a bank of HV Capacitors using HV Wire Connectors and Coils.
7Assemble the Napalm Mixer
Build the 3x3x3 Mixer multiblock near your Gasoline Tank. Route Fluid Pipes from the Gasoline Tank into the Mixer's fluid port, and set up an input chest with a Conveyor Belt to feed Aluminum Grit into the Mixer to automate Napalm production.
8Wire Power and Bootstrap the System
Run HV Wires from your HV Capacitor Bank to the Pumpjack, the Distillation Tower, the Mixer, and the Fluid Pumps. Place Redstone Levers on the control blocks of the machines and Fluid Pumps to enable them. Feed an initial external charge (or a few buckets of Biodiesel) into the system to jumpstart the first batch of Crude Oil refining, after which the Diesel Generator will keep the complex running autonomously.
How it works
The core logic of this setup revolves around continuous fluid fractionation and closed-loop power generation. The Pumpjack draws raw Crude Oil from bedrock-level virtual reservoirs as long as a physical pipe connection reaches the bottom of the world. Because the Pumpjack and Distillation Tower both consume significant Flux, buffering the Crude Oil in a Sheetmetal Tank ensures that refinery operations remain smooth even if power momentarily fluctuates.
Inside the Distillation Tower, heated Crude Oil breaks down into three distinct fluid fractions and one solid item (Bitumen). Because Immersive Engineering fluid pipes can clog if multiple fluids mix without an immediate destination, placing a filtered Fluid Router directly against the tower's output is critical. Furthermore, the tower will completely halt operations if its internal Bitumen buffer fills up, so immediate conveyor extraction into an external storage chest is mandatory.
Once separated, the Diesel fraction is routed directly to a Diesel Generator, which generates far more Flux than the Pumpjack and Distillation Tower consume combined. This creates a massive net-positive energy surplus stored in the HV Capacitor Bank. Meanwhile, the Lubricant is stockpiled to boost the speed of high-tier machines, and the Gasoline is piped directly into a Mixer to be combined with Aluminum Grit for late-game Napalm defense or mining systems.
Upgrades and scaling
- Add Automated Lubricators pointing at the Pumpjack and Excavators, piped directly from your Lubricant Tank, to passively increase their operating speed by 25%.
- Expand the power array by adding a second or third Diesel Generator; a single continuously running Distillation Tower normally produces enough Diesel to support multiple generators (check JEI for exact burn rates in your modpack).
- Attach an item trash can or overflow void system to the Bitumen chest, and use IE Redstone Breakers connected to Tank Comparators to void excess Gasoline or Lubricant so the Distillation Tower never stalls from a single backed-up output.
- Construct a Coker Unit (if playing on a version of Immersive Petroleum that includes it) to process the Bitumen and leftover fluids into Petcoke, which serves as an exceptional coal substitute for blast furnaces and steam boilers.
Common mistakes
- Forgetting to run Fluid Pipes from the bottom of the Pumpjack all the way down to a physical Bedrock block, which results in the Pumpjack animating or sitting idle without extracting any oil.
- Letting the Bitumen item output or any of the three fluid outputs back up; if even one output tank hits 100% capacity, the entire Distillation Tower will stop processing Crude Oil and starve your Diesel Generators.
- Omitting the Redstone signal on IE Fluid Pumps or failing to hammer the output sides with the Engineer's Hammer (orange dot indicator), preventing fluids from being actively pulled out of the Sheetmetal Tanks.
- Using LV or MV wires to power the Distillation Tower and Pumpjack simultaneously, which will either bottleneck their processing speed or burn the wires due to high Flux draw.
FAQ
What happens when the oil reservoir runs completely dry?
Even after the main millions-of-millibuckets reservoir is depleted, most oil chunks retain a tiny 'replenishing' trace amount of oil that the Pumpjack can extract indefinitely at a reduced rate. Check your Core Sample tooltip to see the residual replenishment rate.
Why is my Distillation Tower stuck even though it has power and Crude Oil?
Check two things: first, ensure a Redstone signal is NOT disabling its control block (unless you inverted the control via the Engineer's Hammer); second, verify that the internal fluid buffer isn't blocked by an unassigned fluid in your Fluid Router.
Can I run the Diesel Generator on Gasoline instead?
No, in standard Immersive Petroleum configurations, the big multiblock Diesel Generator only burns Diesel or Biodiesel. Gasoline is utilized in the Portable Generator, speedboats, or mixed into Napalm—check JEI for valid generator fuels in your specific pack.