Immersive Engineering · Early game
Automated Improved Blast Furnace & Steel Foundry
This early-game setup fully automates the conversion of raw Coal and Iron Ingots into Steel Ingots, Slag, and Creosote Oil using Immersive Engineering. By pairing a manual-feed Coke Oven array with an Improved Blast Furnace and two powered Blast Furnace Preheaters, you bypass the agonizingly slow early-game steel grind. It utilizes basic Conveyor Belts and Fluid Pipes to keep the machines running continuously while you focus on building your main base.
- Footprint
- 9x5x6 blocks
- Power
- ~64 FE/t (32 FE/t per Preheater, check JEI for pack overrides)
- Throughput
- ~1 Steel Ingot per 10 seconds with dual Preheaters
- Difficulty
- beginner
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Coke Brick | 27 |
| Blast Brick | 27 |
| Reinforced Blast Brick | 27 |
| Hopper | 5 |
| Blast Furnace Preheater | 2 |
| Fluid Pump | 1 |
| Fluid Pipe | 6 |
| Treated Wood Scaffolding | 8 |
| Conveyor Belt | 6 |
| LV Wire Connector | 5 |
| LV Wire Coil | 4 |
| LV Capacitor | 1 |
| Redstone Torch or Lever | 1 |
| Chest | 4 |
| Engineer's Hammer | 1 |
Build it step by step
1Build the Coke Oven
Construct a solid 3x3x3 cube using 27 Coke Bricks. Right-click the center block of the front face with your Engineer's Hammer to form the Coke Oven multiblock. Note that the basic Coke Oven cannot be automated directly unless your modpack includes an addon or you use Hoppers to extract only when the internal tank isn't full, so plan to place a Hopper on top for Coal input and one underneath the center block to pull out Coal Coke.
2Set Up Creosote Extraction
A Coke Oven stops working when its internal Creosote Oil buffer fills up. Place an Immersive Engineering Fluid Pump adjacent to the bottom of the Coke Oven, configure the touching side to input (blue) with the Engineer's Hammer, and power it with an LV Wire Connector and an adjacent Lever. Run Fluid Pipes from the top of the pump into a nearby fluid storage tank so the oven never clogs.
3Upgrade to the Improved Blast Furnace
If you haven't already, craft 27 Blast Bricks using your first batches of Steel or Magma Blocks to make the Crude Blast Furnace, then cover them with Steel Plates to craft 27 Reinforced Blast Bricks. Place the 27 Reinforced Blast Bricks in a 3x3x3 cube three blocks away from your Coke Oven, and place a Vanilla Hopper directly on top of the very center block. Strike the front center block with your Engineer's Hammer to form the Improved Blast Furnace.
4Attach the Blast Furnace Preheaters
Craft two Blast Furnace Preheaters and place them on the left and right sides of the Improved Blast Furnace. Ensure their bottom exhaust ports face directly into the side ports of the furnace multiblock. Attach an LV Wire Connector to the very top block of each Preheater and connect them to your LV Capacitor or Water Wheel power grid using LV Wire Coils.
5Route Fuel and Iron Inputs
Run a line of Vertical or sloped Conveyor Belts from the bottom output Hopper of the Coke Oven up to the top Hopper of the Improved Blast Furnace. Place a separate Input Chest with a Hopper feeding onto this same conveyor belt line, or directly into the top of the Blast Furnace Hopper, to supply Iron Ingots. The Improved Blast Furnace automatically separates fuel and metal into their dedicated internal slots when fed from the top.
6Connect the Output Chests
Locate the output ports on the Improved Blast Furnace: the front port outputs Steel Ingots, and the rear port outputs Slag. Place a chest directly in front of the front port and another chest directly against the back port. The Improved Blast Furnace automatically ejects both finished Steel and Slag into adjacent inventories without requiring powered extractors.
How it works
Unlike the Crude Blast Furnace, the Improved Blast Furnace is designed explicitly for automation. Its top hopper port acts as a unified input for both fuel (Coal Coke or Charcoal) and metal (Iron Ingots or Ore). Internally, the multiblock sorts these items into their respective slots, meaning you can safely merge your Coal Coke output belt and your Iron Ingot feed into a single Hopper at the top of the structure without worrying about clogging the line.
To prevent bottlenecks, the system handles all byproducts automatically. The Coke Oven generates Creosote Oil alongside Coal Coke; the powered Fluid Pump continuously drains this fluid into a tank so the oven never stalls. Similarly, the Improved Blast Furnace halts production if its Slag buffer fills up. By placing chests directly against both the front and rear ports of the furnace, the multiblock utilizes its built-in auto-ejection mechanic to clear out Steel Ingots and Slag the exact tick they are produced.
Adding two Blast Furnace Preheaters on the flanks of the Improved Blast Furnace dramatically accelerates the smelting speed. When supplied with Low Voltage power via the top connectors, the preheaters blow hot air into the furnace, tripling the processing speed compared to an unpowered furnace. This ensures your steel production easily keeps pace with your early-game crafting needs for heavy machinery.
Upgrades and scaling
- Add a second Coke Oven in parallel to match the consumption speed of the dual-preheater Improved Blast Furnace, as a single Coke Oven processes coal much slower than a boosted Blast Furnace consumes it.
- Route the extracted Slag via Conveyor Belts into a Crusher or crafting system to automate Concrete production for base building.
- Transition to an Arc Furnace in the mid-to-late game once you have substantial HV power generation, which smelts steel nearly instantaneously using Graphite Electrodes.
Common mistakes
- Trying to automate the Crude Blast Furnace: The standard 3x3x3 Blast Brick furnace does not accept Hoppers or Conveyor Belts; you must upgrade to Reinforced Blast Bricks first.
- Forgetting to empty the Slag port: If the rear Slag inventory fills up, the Improved Blast Furnace will completely stop smelting Steel even if the front chest is empty.
- Letting Creosote Oil back up: The Coke Oven stops cooking Coal if its internal fluid tank reaches full capacity. Always use a powered Fluid Pump or fluid trash can to keep it drained.
- Misaligning the Preheaters: Blast Furnace Preheaters must be placed on the exact middle blocks of the left and right sides, facing inward, and must be powered from the very top block.
FAQ
Why won't my Fluid Pipes pull Creosote Oil out of the Coke Oven?
The Coke Oven does not auto-eject fluids. You must use an Immersive Engineering Fluid Pump adjacent to the oven, hammer its input side to blue, supply it with RF/FE power, and apply a constant Redstone signal.
Can I use regular Coal in the Improved Blast Furnace?
No, Immersive Engineering Blast Furnaces only accept Coal Coke or four blocks/items of Charcoal per operation. Regular Coal must be processed in the Coke Oven first.
How do I stop Iron Ingots from filling up the top Hopper and blocking Coal Coke?
If you send too much Iron at once, the top Hopper can fill completely with Iron and block fuel from entering. Use a simple Redstone Comparator setup or feed the Iron and Coal Coke via two separate Hoppers pointing into the top port.