GregTech CEu Modern · Mid game
GregTech CEu Automated 4x Ore Processing Plant
This HV-tier processing line automates the full GregTech CEu Modern ore processing chain, transforming raw ores into pure dusts while extracting three tiers of valuable rare byproducts. Utilizing Advanced Macerators II enables the third byproduct slot, making this the earliest point in the game to achieve maximum non-chemical mineral extraction. Building this plant eliminates manual sorting bottlenecks and passively generates critical progression materials like Platinum Group Sludge, Gallium, and Indium components.
- Footprint
- 9x5x4 blocks
- Power
- ~2,048 EU/t (4A HV at peak load, check JEI per recipe)
- Throughput
- ~1 raw ore per 3-5 seconds (scale with parallel Thermal Centrifuges)
- Difficulty
- intermediate
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Advanced Macerator II (HV) | 2 |
| Advanced Ore Washing Plant II (HV) | 1 |
| Advanced Thermal Centrifuge II (HV) | 2 |
| Advanced Sifter II (HV) | 1 |
| Advanced Centrifuge II (HV) | 1 |
| Stainless Steel Crate | 3 |
| HV Conveyor Module | 2 |
| Item Filter / Ore Dictionary Filter Cover | 3 |
| Normal Brass Item Pipe | 16 |
| Normal Stainless Steel Fluid Pipe | 6 |
| 4x Gold Cable | 12 |
| HV Battery Buffer (4x or 8x) | 1 |
Build it step by step
1Lay the HV Power Backbone
Place an HV Battery Buffer connected to your power generation and run a line of 4x Gold Cables along the back wall. Because Thermal Centrifuges and Macerators draw full HV amperage during operation and overclocking, make sure your power supply can handle at least 4 to 6 Amps of HV continuously without draining the buffer.
2Install Primary Crushing and Washing
Place the first Advanced Macerator II next to your input Stainless Steel Crate, attaching an HV Conveyor Module to pull raw ores in. Directly adjacent to the Macerator, place the Advanced Ore Washing Plant II. Use the Wrench to face the Macerator's output toward the Ore Washer and enable Item Auto-Output on the Macerator's GUI.
3Plumb the Water Supply
Connect a high-throughput water source (such as a GregTech Pump, Reservoir Hatch, or infinite water tank) to the Advanced Ore Washing Plant II using Normal Stainless Steel Fluid Pipes. Ensure the water supply can provide at least 1,000 mB per operation to avoid stalling the washer.
4Split Gem and Metal Ores
Run a line of Normal Brass Item Pipes from the output side of the Ore Washing Plant to the Advanced Sifter II and the pair of Advanced Thermal Centrifuges II. Attach an Ore Dictionary Filter cover to the Sifter's input face and configure it only to accept Purified Ores that yield gems ( check JEI for specific ores like Diamond, Emerald, Ruby, Sapphire, and Green Sapphire).
5Set Up Parallel Thermal Centrifuges
Thermal Centrifuges have noticeably longer recipe durations than Macerators or Ore Washers. Place two Advanced Thermal Centrifuges II side-by-side to receive all non-gem Purified Ores from the brass item pipe line, preventing backstuffing in the Ore Washer.
6Install Secondary Grinding and Centrifuging
Place the second Advanced Macerator II adjacent to the Thermal Centrifuges to crush Centrifuged Ore into final dusts and extract the third byproduct. Nearby, place an Advanced Centrifuge II with an Ore Dictionary Filter set to `dustImpure*` and `dustPure*` to catch any stray impure dusts generated as byproducts from the first Macerator.
7Connect Final Output Storage
Run a unified output Brass Item Pipe connecting the output faces of the second Macerator, the Sifter, the Centrifuge, and the overflow byproduct slots of the earlier machines into a bank of Stainless Steel Crates or Super Chests. Use a Screwdriver on the machine output faces to enable 'Allow Input from Output Side' if you are routing items through shared pipe faces.
How it works
In GregTech CEu Modern, macerating a block of ore or raw ore doubles the base yield into two Crushed Ores, while offering a small chance at a primary byproduct. Crucially, the HV-tier Advanced Macerator II is the earliest single-block macerator to unlock all three output slots. Without an HV Macerator, the third output slot is locked, meaning you permanently lose the final byproduct during the last grinding step and risk clogging lower-tier macerators with Stone Dust.
Once crushed, the ore passes through the Ore Washing Plant to become Purified Ore, yielding guaranteed tiny piles of the primary byproduct and Stone Dust. At this stage, the routing splits based on mineral chemistry: crystalline ores (like Diamond, Olivine, or Coal) are diverted into the Advanced Sifter II for high-grade gem outputs, while metallic ores route into the Advanced Thermal Centrifuge II. The Thermal Centrifuge uses intense heat to extract the second byproduct before handing the Centrifuged Ore to the final HV Macerator, which grinds it into pure smeltable dust alongside the third and final byproduct.
Because every step in this chain produces secondary items like Stone Dust, Tiny Piles of Dust, or Impure Dusts, all intermediate machines must connect to the main output pipe network in addition to the next processing machine. By placing restrictive Ore Dictionary Filters (`crushedPurified*`, `crushedCentrifuged*`) on the downstream machines, only the main ore items advance to the next processing step, while all finished dusts and tiny piles naturally bypass them and flow straight into final storage.
Upgrades and scaling
- Add an HV Chemical Bath branch using Mercury or Sodium Persulfate to wash specific Crushed Ores (like Chalcopyrite, Gold, or Nickel) for guaranteed bonus Platinum Group, Gold, or Cobalt byproducts.
- Add an HV Electromagnetic Separator to process specific Purified Dusts (such as Bastnasite, Monazite, or Iron) for free Neodymium, Rare Earth, and Gold nuggets.
- Upgrade single-block HV machines to EV multiblocks—specifically the Large Maceration Tower, Large Ore Washer, and Large Thermal Refinery—to gain multi-recipe parallel processing via Subtick Parallels and Processing Arrays.
- Integrate an Automatic Packer (HV Packager) at the end of the line with a 9-to-1 Schematic to automatically combine Tiny Piles of Dust into full Dusts.
Common mistakes
- Using MV Macerators instead of HV Advanced Macerators II: MV Macerators only have 2 output slots and will void or jam when a recipe attempts to output the main dust, stone dust, and a byproduct simultaneously.
- Sending all ores through the Thermal Centrifuge without checking JEI: Certain ores have high-value byproducts exclusively in the Pulverizer/Centrifuge path or Chemical Bath path and yield nothing useful in the Thermal Centrifuge.
- Forgetting to filter out Stone Dust between stages: If Stone Dust enters the Thermal Centrifuge or second Macerator input slots, the entire factory will halt.
- Under-sizing power cables for the Thermal Centrifuges: Thermal Centrifuges consume constant high EU/t over long durations; using 1x or 2x cables for the whole line will cause cable fires or constant machine stuttering (Not Enough Energy).
FAQ
Why do I need two Advanced Thermal Centrifuges II for just one Macerator and Ore Washer?
Thermal Centrifuge recipes typically take two to three times longer than Macerator or Ore Washer recipes. Having two in parallel prevents Purified Ores from backing up and halting the entire line.
Can I use Simple Washer instead of the full Ore Washing Plant recipe to save water and power?
The Simple Washer recipe is much faster and uses only 100 mB of water, but it completely skips the primary byproduct extraction. Only use the Simple Washer mode for bulk common ores where you do not care about the first byproduct.
How do I stop my output crates from filling up with hundreds of different Tiny Piles of Dust?
Place an HV Packager before your storage crates and insert an Ore Dictionary Filter set to `dustTiny*`. Configure the Packager to 3x3 mode so it automatically compresses every 9 tiny piles into 1 full dust.