Forestry · Mid game

Binnie's Mods Genetic Bee & Tree Breeding Laboratory

This laboratory setup leverages Forestry and Binnie's Mods Genetics to systematically extract, sequence, duplicate, and splice traits onto bees and tree saplings. Building this facility eliminates the randomness of traditional cross-breeding, allowing you to engineer perfect specimens with ideal fertility, lifespan, and productivity for your mid-game farms.

Footprint
11x7x4 blocks
Power
~1.5 to 3 kRF/t at full load (check JEI for exact pack scaling)
Throughput
~1 fully inoculated serum applied per 3-5 minutes
Difficulty
intermediate

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

Excess Drones & SaplinTarget Bee or SaplingEnzymePolymerising BacteriaRaw DNARaw DNARaw DNAUnidentified SequencedAnalysed Sequenced ViaDecoded Gene DataSelected Trait TemplatEmpty Serum / Serum ArCharged SerumModified Queen, Drone,RF / FE PowerRF / FE PowerRF / FE PowerSpecimens Input ChestINPUTGenepoolMACHINEIncubatorMACHINEIsolatorMACHINEAnalyserMACHINESequencerMACHINEGene DatabaseSTORAGESynthesizerMACHINEPolymeriserMACHINEInoculatorMACHINEBio Generator & PeatEnginesPOWEREngineered SpecimensChestOUTPUT
InputMachinePowerStorageOutputItemFluidEnergySignal

Materials

ItemCount
Genepool1
Incubator2
Isolator1
Analyser1
Sequencer2
Gene Database1
Synthesizer1
Polymeriser1
Inoculator1
Still1
Fermenter1
Bio Generator2
Chest4
Hopper8
Empty Serum Vial16
Empty Sequenced Vial64
DNA Dye64
Ethanol Bucket4

Build it step by step

  1. 1Establish the Power and Reagent Line

    Place your Fermenter, Still, and Bio Generators along the back wall to produce Ethanol and RF power. Next to them, set up two Incubators supplied with Water, Wheat, Sugar, and Blaze Powder to continuously brew Growth Medium, Bacteria, Enzyme, and Polymerising Bacteria.

  2. 2Set Up the Raw DNA Production

    Place the Genepool adjacent to your first Incubator and connect an input chest for surplus drones via a Hopper. Feed Enzyme from the Incubator and Ethanol from the Still into the Genepool so it can melt unwanted bees and saplings into liquid Raw DNA.

  3. 3Build the Trait Extraction Line

    Position the Isolator, Analyser, and two Sequencers in a straight line along the left side of the lab. Pipe Ethanol into the Isolator and load it with Empty Sequenced Vials. Connect the Isolator's output to the Analyser, and supply the Analyser with DNA Dye.

  4. 4Install the Gene Database and Sequencers

    Connect the output of the Analyser into the Sequencers, and feed Fluorescent Dye into the Sequencers as well. Place the Gene Database right beside the Sequencers so you can easily deposit completed sequences or link them via adjacent inventory access.

  5. 5Assemble the Serum Synthesis Station

    On the right side of the room, place the Synthesizer, Polymeriser, and Inoculator in sequence. Route fluid pipes carrying Raw DNA from the Genepool directly into the Synthesizer and Polymeriser, and route Polymerising Bacteria from your second Incubator into the Polymeriser.

  6. 6Connect Power and Output Storage

    Run energy conduits from your Bio Generators along the floor beneath all Genetics machines, paying special attention to the power-hungry Inoculator and Polymeriser. Attach an output chest to the Inoculator using a Hopper to catch finished, genetically perfected bees and saplings.

How it works

The laboratory operates on two parallel tracks: chemical reagent production and genetic data processing. Surplus drones and saplings from your basic apiaries are dumped into the Genepool along with Enzyme and Ethanol, breaking them down into a steady supply of liquid Raw DNA. Simultaneously, the Incubators convert water, wheat, sugar, and blaze powder into essential bacterial broths required for serum replication.

To capture a specific trait, a target specimen is placed in the Isolator, which randomly pulls genetic alleles onto Empty Sequenced Vials without destroying the bee or tree (though it may consume Ethanol and vials). The Analyser reveals which trait is on the vial using DNA Dye, and the Sequencer slowly uploads that trait into the Gene Database. Because sequencing takes a significant amount of time, running two Sequencers in parallel prevents bottlenecks.

Once your desired traits—such as Maximum Fertility, Nocturnal, or High Sapiness—are cataloged in the Gene Database, you insert an Empty Serum Vial or Serum Array into the Synthesizer to imprint the gene. The resulting uncharged serum moves to the Polymeriser, which uses Raw DNA, Polymerising Bacteria, and optional Gold Nuggets to fill the serum with charges. Finally, the Inoculator consumes those charges to overwrite both the active and inactive alleles of your target specimen, guaranteeing true-breeding offspring.

Upgrades and scaling

  • Craft Serum Arrays instead of single Empty Serum Vials to imprint and apply up to 6 different genetic traits simultaneously inside the Inoculator.
  • Supply the Polymeriser with Gold Nuggets to drastically speed up the serum charging process and reduce Raw DNA consumption.
  • Install an Acclimatiser at the end of the line to quickly boost your engineered bees' temperature and humidity tolerances using Ice, Sand, or Blaze Powder without spending serum charges.
  • Scale up the Sequencer array to 4 or 6 machines once you begin cataloguing entire species trees, as sequencing is by far the slowest step in the pipeline.

Common mistakes

  • Inoculating only the Princess and forgetting the Drone: the Inoculator sets both active and inactive traits on one bee, so you must inoculate both the Princess and a Drone to prevent their offspring from reverting to hybrid genes.
  • Throwing away Empty Sequenced Vials: when the Sequencer finishes uploading a gene, it returns the empty vial, which should be routed back into the Isolator for reuse.
  • Starving the Polymeriser of power: the Polymeriser and Inoculator draw significant energy and will stall or lose progress on current operations if your power grid fluctuates.
  • Letting the Isolator run unattended on rare specimens: while it usually leaves the specimen intact, there is a small chance to exhaust or lose non-stackable bees if misconfigured, so always breed a few backup drones first.

FAQ

Why is my Sequencer taking so long to finish a single vial?

Sequencing is intentionally slow; however, you can insert multiple identical analysed vials into the same Sequencer to combine their progress percentage and finish much faster.

Can I use the same Gene Database for both Bees and Trees?

Yes, the Gene Database stores all Binnie's Mods genetic types—including Bees, Trees, Butterflies, and Flowers—in separate tabs within the same block.

How do I keep my favourite Serum without re-synthesizing it every time?

Never let the Inoculator drain a Serum down to zero charges if you want to reuse it easily; pull it out when one charge remains and put it back into the Polymeriser to top it off.

More Forestry designs

Forestry · Late gameForestry Multiblock Alveary Rapid Mutation & Production SetupThe Forestry Multiblock Alveary Rapid Mutation & Production Setup is a late-game apiculture engine designed to bypass the slow RNG of standard Bee Houses and Apiaries. By integrating Alveary Mutators, Frame Housings, and climate control modules into a single 3x3x3 structure, this system guarantees 100% mutation rates or massively boosts specialty Honeycomb production per bee tick. You should build this to rapidly unlock high-tier bee species and automate the extraction of valuable resources like Royal Jelly, Pollen Clusters, and mineral combs.Advanced6 steps
Forestry · Early gameForestry Multiblock Arboretum & Charcoal Power PlantThe Forestry Multiblock Arboretum & Charcoal Power Plant is a self-sustaining, early-game automated tree farm that converts harvested wood and saplings into continuous renewable energy. By utilizing a basic 3x3x4 Multiblock Farm configured as an Arboretum, it produces more than enough Oak Wood and Oak Saplings to run a self-feeding cycle of Fermenters and Biogas Engines while banking excess charcoal and wood for your base. It is the ideal foundational setup for players transitioning into Forestry automation without relying on massive external power grids.Beginner7 steps
Forestry · End gameGendustry Perfect-Trait Bee Cloning & Imprinting FacilityThis end-game genetic engineering facility combines Forestry with the Gendustry addon to completely eliminate the randomness of traditional bee breeding. By liquefying excess drones into Liquid DNA and isolating ideal alleles onto a master Genetic Template, you can instantly mutate and imprint perfected traits onto any species. Build this setup to mass-produce custom, high-efficiency bee lineages with maximum production speeds, nocturnal behavior, and full environmental tolerance.Advanced7 steps
Forestry · Late gameGendustry Industrial Apiary Resource & Comb Processing ArrayThis late-game Forestry and Gendustry setup automates massive resource generation using a high-throughput array of upgraded Industrial Apiaries. By connecting these apiaries directly to an overclocked bank of Centrifuges and Squeezers, you can effortlessly turn raw Honeycomb variants into refined materials, metals, and liquid Honey without manual intervention. It is the ultimate endgame solution for players seeking infinite passive resources from bred bee species.Advanced8 steps
Forestry · Mid gameForestry Self-Sustaining Ethanol RefineryThis setup creates a self-sustaining biofuel facility using Forestry's core liquid processing machines. It transforms surplus tree saplings, honey drops, and apatite into high-energy Ethanol by cycling materials through a Squeezer, Fermenter, and Still. Building this provides a completely renewable, net-positive power source that seamlessly utilizes the byproducts of your existing bee and tree breeding operations.Intermediate7 steps