Applied Energistics 2 · Late game
Applied Mekanistics 5x Ore & Chemical Processing Plant
This late-game setup bridges Applied Energistics 2 and Mekanism using the Applied Mekanistics addon to store, monitor, and autocraft gasses and slurries directly within your ME network. By replacing sprawling webs of Pressurized Tubes with ME Pattern Providers and Chemical Storage Cells, it delivers clean, on-demand 5x ore multiplication without chemical bottlenecks or buffer clogs. It is the ultimate scalable solution for players who want massive ingot yields managed completely by AE2 crafting CPUs.
- Footprint
- 11x7x5 blocks
- Power
- ~40 kFE/t at full load (Check JEI based on Speed Upgrades)
- Throughput
- ~2 raw ores/sec into 10 ingots/sec
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| ME Controller | 1 |
| ME Drive | 1 |
| 64k ME Chemical Storage Cell | 4 |
| 64k ME Item Storage Cell | 4 |
| 64k ME Fluid Storage Cell | 2 |
| ME Pattern Provider | 6 |
| ME Import Bus | 5 |
| ME Export Bus | 2 |
| ME Dense Smart Cable | 32 |
| 64k Crafting Storage | 2 |
| Crafting Co-Processing Unit | 4 |
| Blank Pattern | 36 |
| Acceleration Card | 28 |
| Chemical Dissolution Chamber | 1 |
| Chemical Washer | 1 |
| Chemical Crystallizer | 2 |
| Ultimate Injecting Factory | 1 |
| Ultimate Purifying Factory | 1 |
| Ultimate Crushing Factory | 1 |
| Ultimate Enriching Factory | 1 |
| Ultimate Smelting Factory | 1 |
| Speed Upgrade (Mekanism) | 64 |
| Energy Upgrade (Mekanism) | 64 |
| Gas Upgrade (Mekanism) | 16 |
| Ultimate Universal Cable | 20 |
Build it step by step
1Establish the ME Chemical Storage Core
Place your ME Controller, ME Drive, and Crafting CPU multiblock to form the backbone of the network. Insert the 64k ME Chemical Storage Cells, Fluid Storage Cells, and Item Storage Cells into the ME Drive. Partition at least two Chemical Cells on a Cell Workbench specifically for Sulfuric Acid, Hydrogen Chloride, and Oxygen so leftover ore slurries never flood your reagent storage.
2Connect Reagent Supplies into AE2
Hook up your existing Mekanism chemical generators (producing Sulfuric Acid, Hydrogen Chloride, and Oxygen) as well as a high-speed water source (like a Sink or Electric Pumps) to the ME network using ME Import Buses equipped with Acceleration Cards. Verify in your ME Pattern Access or Storage Terminal that gasses and fluids are actively filling the digital storage cells.
3Place the Tier 5 Slurry Processing Machines
Set down the Chemical Dissolution Chamber, Chemical Washer, and two Chemical Crystallizers in a neat row with a one-block gap behind them for cabling. Install 8 Speed Upgrades and 8 Energy Upgrades into each machine, and add 8 Gas Upgrades to the Dissolution Chamber to maximize acid efficiency.
4Wire Pattern Providers to the Chemical Machines
Place a block-form ME Pattern Provider directly against the back of the Chemical Dissolution Chamber, the Chemical Washer, and each Chemical Crystallizer. Because Applied Mekanistics lets Pattern Providers push gasses, slurries, fluids, and items simultaneously, a single adjacent face handles both inputs for the Dissolution Chamber and Washer.
5Configure Mekanism Chemical Side I/O
Open the Side Config GUI for the Dissolution Chamber, Washer, and Crystallizers. Set the back face (touching the Pattern Provider) to Input for Items, Gasses, Fluids, and Slurries as required by each machine. Set the top face of all four machines to Output for Slurries or Items, and attach ME Import Buses with Acceleration Cards to the top faces to pull products immediately back into the ME Drive.
6Assemble the Tier 4 to Tier 1 Solid Factory Line
In an adjacent row, place the Ultimate Injecting Factory, Ultimate Purifying Factory, Ultimate Crushing Factory, Ultimate Enriching Factory, and Ultimate Smelting Factory side-by-side. Open each Factory's Side Config, enable Auto-Eject, and set their left/right faces to pass items directly down the chain from Injecting all the way to Smelting.
7Supply Secondary Gasses and Return Final Ingots
Place an ME Pattern Provider on the back of the Ultimate Injecting Factory to receive Ore Crystals, and attach ME Export Buses on the top faces of the Injecting and Purifying Factories configured to continuously pump Hydrogen Chloride and Oxygen from your Chemical Cells. Place a final ME Import Bus or ME Interface on the output side of the Ultimate Smelting Factory to return finished ingots to your network.
8Encode Processing Patterns and Power Up
At an ME Pattern Encoding Terminal, create Processing Patterns for each step: Raw Ore + Sulfuric Acid to Dirty Slurry; Dirty Slurry + Water to Clean Slurry; Clean Slurry to Crystals; and Crystals to Ingots (check JEI for exact millibucket ratios). Place each pattern into its corresponding machine's Pattern Provider, connect Ultimate Universal Cables to power all machines, and request your first batch of 5x ingots.
How it works
Traditional Mekanism 5x ore processing plants suffer from a well-known bottleneck: slurries cannot be voided easily, and if a partial stack of Raw Iron leaves leftover Dirty Iron Slurry in a Chemical Washer, the entire pipe line locks up and blocks Copper or Gold from processing. By introducing Applied Mekanistics, the ME network itself becomes a universal chemical buffer. Every intermediate slurry is immediately imported back into a 64k ME Chemical Storage Cell rather than sitting inside a pipe or machine buffer.
When you request an ingot craft—or set up a continuous export rule—the AE2 Crafting CPU breaks the job into modular chemical steps. First, the Pattern Provider on the Chemical Dissolution Chamber pushes the exact millibucket amount of Sulfuric Acid alongside the Raw Ores. Once the Dirty Slurry is imported into the ME Drive, the next Pattern Provider pushes that Dirty Slurry and Water into the Chemical Washer. Clean Slurry returns to the ME Drive and is then dispatched across multiple Chemical Crystallizers in parallel.
Because the solid processing steps (Crystals to Shards, Clumps, Dirty Dust, Dust, and Ingots) use 1-to-1 item ratios without leftover fluid fractions, chaining Ultimate Factories side-by-side is much more channel-efficient than giving every Factory its own Pattern Provider. You simply treat the entire five-machine Factory line as a single virtual machine: the Pattern Provider injects Ore Crystals into the Ultimate Injecting Factory, continuous ME Export Buses keep the Hydrogen Chloride and Oxygen tanks topped off, and the Ultimate Smelting Factory returns the finished ingots to satisfy the crafting recipe.
Upgrades and scaling
- Parallel Chemical Crystallizers: The Chemical Crystallizer is significantly slower than the Dissolution Chamber and Washer even with 8 Speed Upgrades; surround a single ME Pattern Provider with up to five Chemical Crystallizers to distribute Clean Slurry automatically in round-robin fashion.
- Quantum Entangloporter or Flux Point Integration: Replace the Ultimate Universal Cable power line with direct high-tier wireless power taps on hungry machines like the Chemical Dissolution Chamber to prevent brownouts at max speed.
- Automated Raw Ore Triggering: Attach an ME Level Emitter or an ME Requester (if installed) to automatically trigger 5x crafting jobs whenever Raw Ore counts in your ME Drive exceed a specific threshold.
Common mistakes
- Forgetting to configure Mekanism's separate Side Config tabs: Mekanism separates Items, Gasses, Infuse Types, Pigments, Slurries, and Fluids into different tabs inside the machine GUI. You must set the Pattern Provider face to Input on both the Item/Slurry tab and the Gas/Fluid tab.
- Encoding patterns with un-rounded slurry ratios: If you encode a pattern that leaves a fractional remainder of slurry in the machine that cannot form a full crystal, the machine will jam. Check JEI and always encode batch sizes (e.g., 3 Raw Ores to 2,000 mB Slurry to 10 Crystals) that divide cleanly into 200 mB Crystal increments.
- Enabling Auto-Eject on Chemical Machines into Pattern Providers: While item machines can push products back into a Pattern Provider, Mekanism slurry outputs are much more reliable when pulled by a dedicated ME Import Bus with 4 Acceleration Cards.
- Running out of Gas Upgrades in the Dissolution Chamber and Injecting Factory: Without 8 Gas Upgrades installed, Sulfuric Acid and Hydrogen Chloride consumption skyrocket when 8 Speed Upgrades are active, draining your chemical cells prematurely.
FAQ
Why not push Dirty Slurry directly from the Dissolution Chamber into the Washer?
Routing Dirty Slurry back into the ME Drive first allows a single Chemical Washer to service multiple Dissolution Chambers and lets you use your Clean Slurries for other modded recipes if needed, while keeping every chemical visible on your ME Terminal.
Can a single ME Pattern Provider push both items and Sulfuric Acid at the same time?
Yes! With Applied Mekanistics installed, a standard AE2 Pattern Provider natively holds and pushes items, fluids, gasses, and slurries through the same block face as long as the Mekanism machine's Side Config accepts both types on that side.
How many Chemical Storage Cells do I actually need?
A single 64k ME Chemical Storage Cell can hold 63 different chemical types (covering all standard Mekanism slurries plus reagents), though using 2 to 4 cells partitioned with Inverter Cards or Whitelists is recommended for clean organization.