Modular Machinery Reborn · Addon guide · Intermediate

Modular Machinery Reborn Ars Nouveau Guide: Source Hatches & Magic Tech

Merging arcane energy with heavy industrial automation is a core appeal of custom tech-magic modpacks. In this guide, you will learn how to integrate Ars Nouveau's Source system directly into Modular Machinery Reborn multiblocks using dedicated Source Hatches. By the end, you will be able to route raw Source smoothly into massive factory setups and script hybrid recipes that demand both Forge Energy and magical fuel.

What you need

  • Modular Machinery Reborn (MMR) and its Ars Nouveau compatibility addon installed
  • Ars Nouveau (specifically Source Jars, Source Relays, and a Dominion Wand)
  • KubeJS or a Datapack Loader (such as Paxi or OpenLoader) for custom recipes
  • Machine Controller, Machine Casings, Item Input/Output Buses, and Energy Input Hatches
  • Source Input Hatch and Source Output Hatch (check JEI for the exact tier names available in your setup)

Step by step

  1. 1Select the Right Source Hatch Tier

    Open JEI and search for the Source Input Hatch and Source Output Hatch added by the Modular Machinery Reborn compatibility bridge. Just like energy and fluid hatches, these come in various tiers ranging from Tiny to Ultimate. Each tier governs the internal buffer capacity and transfer rate, so pick a tier that easily holds the total Source required for a single crafting cycle of your custom machine.

    Tip: Hover over the hatch in JEI or check your modpack config files to see the exact numerical Source capacity for each tier.

  2. 2Design the Multiblock Structure

    When building your custom machine JSON or using the in-game structure builder tool, incorporate the Source Input Hatch into the machine's outer casing framework. You do not need to hardcode a specific tier if you use block tags or allow any valid hatch to replace a standard Machine Casing via dynamic modifiers. Place your Machine Controller at the front and ensure you also include standard Item Buses and an Energy Hatch if you are making a hybrid tech-magic setup.

    Tip: Place your Source Hatches on an exposed outer edge of the multiblock so your Ars Nouveau relays have a clear line of sight or easy access.

  3. 3Set Up Source Generation and Storage

    Build an Ars Nouveau Source generation array nearby using Sourcelinks (like an Agronomic or Volcanic Sourcelink) feeding into a bank of Source Jars. Because multiblock machines often consume massive bursts of magic during high-speed processing, a single jar rarely keeps up. Create a buffer of multiple jars near your Modular Machinery structure to prevent recipe stalling.

  4. 4Route Source with Relays and the Dominion Wand

    Wait for your multiblock to form by checking the Machine Controller interface, then place an Ars Nouveau Source Relay within range of both your Source Jars and the machine's Source Input Hatch. Equip your Dominion Wand, sneak-right-click the Source Jar to set the extraction point, and sneak-right-click the Source Relay. Finally, link the Source Relay directly to the Source Input Hatch on your multiblock in the exact same way.

    Tip: Use a Source Relay: Splitter or Collector if you are feeding a massive multiblock from half a dozen jars simultaneously.

  5. 5Script Hybrid Recipes via KubeJS

    To make the machine actually use the magic you routed, open your KubeJS server scripts folder to define a recipe for your custom machine. Alongside your standard item and Forge Energy requirements, add a Source requirement method (typically structured as `.requireSource(amount)` or via the custom JSON requirement type for Ars Nouveau source). Save the script and run `/reload` in-game to apply the hybrid recipe.

    Tip: Always verify the newly reloaded recipe in JEI to confirm the purple Source bar appears alongside your items and RF/FE bars.

  6. 6Automate Source Extraction (Optional)

    If your custom machine generates magic—such as a high-tech Arcane Condenser that burns coal and water to produce Source—replace the input hatch with a Source Output Hatch. Link the Source Output Hatch to an external Source Relay using the Dominion Wand (selecting the hatch first, then the relay), and route that relay into empty Source Jars. The machine will automatically halt production if the output hatch buffer hits maximum capacity, so ensure your jar bank has overflow handling.

How it works

Modular Machinery Reborn works on a strict component-checking loop conducted by the Machine Controller. Every time a recipe attempts to start or advance a tick, the controller scans all attached hatches and buses formed within its structural blueprint. The Ars Nouveau integration wraps the standard Source capability into a specialized MMR component, allowing the controller to read the hatch's internal magic buffer just like it reads fluid tanks or Forge Energy batteries.

On the Ars Nouveau side, the Source Input Hatch behaves identically to an invisible Source Jar. It exposes the native ISourceTile capability to the world, which is why the Dominion Wand and Source Relays recognize it without needing special bridging pipes or converter blocks. When a relay pulses, it deducts Source from your external jar and adds it directly to the hatch's internal NBT data.

During crafting, the machine can consume Source either all at once at the start of the process or per-tick, depending on how you write your KubeJS script or JSON datapack. This allows modpack developers to build true Magitech bottlenecks—forcing players to scale up both their industrial power grids and their botanical or alchemical Source farms to keep a single endgame multiblock running smoothly.

Common mistakes

  • Exceeding Hatch Buffer Capacity: Writing a recipe that demands 50,000 Source while only attaching a Tiny Source Input Hatch that holds 10,000. The recipe will never start unless you upgrade the hatch tier or install multiple input hatches on the same structure.
  • Backwards Dominion Wand Linking: Clicking the Source Input Hatch before the Source Jar when binding with the Dominion Wand. Remember the golden rule of Ars Nouveau: always select the 'From' block first and the 'To' block second.
  • Relay Range Cutoff: Placing your Source Jars too far away from the multiblock's hatch. Standard Source Relays have a limited block range; check the visual particle beam after linking to confirm the connection actually established.
  • Forgetting to Reload and Re-check Structure: Modifying the JSON structure to allow Source Hatches without breaking and replacing the Machine Controller or waiting for the structure check cycle to validate the newly added block.

FAQ

Can I put multiple Source Input Hatches on a single multiblock to hold more Source?

Yes. If your structure layout allows dynamic hatch placement, the Machine Controller will pool the internal buffers of all attached Source Input Hatches together to meet large recipe requirements.

Do standard fluid pipes or energy cables connect to Source Hatches?

No. Source in Ars Nouveau is not a standard Forge fluid or energy unit. You must use Ars Nouveau's native Source Relays, or put a Source Jar directly adjacent to the hatch if your setup utilizes automatic adjacency transfer addons.

What happens if the Source runs out mid-craft?

If your recipe is scripted to consume Source upfront, the craft simply continues once started. If it is scripted for per-tick Source consumption, the machine will either pause progress or lose progress depending on your recipe's reset configuration.

Why aren't the Source Hatches showing up in my JEI?

Modular Machinery Reborn is a base framework. To use Ars Nouveau Source Hatches, ensure you have the specific MMR Ars Nouveau compatibility module installed alongside both base mods, and verify that a datapack or KubeJS script is active.

By integrating Source Hatches into your Modular Machinery Reborn structures and linking them with Ars Nouveau relays, you can seamlessly merge arcane magic generation with massive industrial factory automation.

More Modular Machinery Reborn guides

Modular Machinery Reborn · Getting startedModular Machinery Reborn Getting Started Guide: Building Your First MultiblockModular Machinery Reborn brings massive, custom factory automation to Minecraft by transforming standard blocks into unified processing structures. In this beginner guide, you will learn how to read blueprints, configure a Machine Controller, and assemble your very first functional multiblock machine. Mastering these core concepts is essential for navigating expert modpacks or designing your own custom machinery.Beginner7 steps
Modular Machinery Reborn · ExplainedBuses, Hatches, and Casings Explained: Tiered I/O LogicMastering the tiered input and output components of Modular Machinery Reborn is essential for constructing and scaling custom multiblock structures. This guide breaks down how Casings, Item Buses, Fluid Hatches, and Energy Hatches interact with the Machine Controller, allowing you to optimize resource throughput and upgrade your setups dynamically without rebuilding from scratch.Beginner7 steps
Modular Machinery Reborn · PowerHow to Power Modular Machines: Energy Hatches and RF/FE SetupThis guide explains how to supply Forge Energy (FE) or Redstone Flux (RF) to custom multiblocks in Modular Machinery Reborn, as well as how to extract power from custom generator structures. Mastering the tiered Energy Hatch system is essential for automating late-game modpack processing lines and preventing power bottlenecks during high-demand recipes.Intermediate7 steps
Modular Machinery Reborn · AutomationHow to Automate Modular Machinery: AE2, Refined Storage, and Pipe SetupsAutomating custom multiblocks in Modular Machinery Reborn requires smart routing across multiple input and output blocks rather than connecting to a single machine face. In this guide, you will learn how to integrate tiered Item Input Buses, Fluid Input Hatches, and Output blocks with Applied Energistics 2, Refined Storage, and standard logistics pipes. Mastering these setups prevents recipe deadlocks, stops input buses from overflowing, and enables hands-free batch crafting.Intermediate7 steps
Modular Machinery Reborn · Setup guideHow to Create Custom Multiblocks with JSON and DatapacksModular Machinery Reborn gives you the power to design and program massive, custom multiblock machines from scratch. In this guide, you will learn how to build a physical structure in-game, export its block pattern using the built-in Structure Creator tool, configure modifiers in JSON, and load your creation globally using a datapack loader.Intermediate7 steps
Modular Machinery Reborn · ExplainedModular Machinery Reborn KubeJS Guide: Scripting Custom RecipesModular Machinery Reborn is an empty canvas until you populate your custom multiblocks with functional processing rules. In this guide, you will learn how to write KubeJS server scripts to dynamically inject complex recipes into your machines without writing verbose raw JSON files. Mastering this allows you to balance processing ticks, combine item, fluid, and energy inputs, and design probability-based byproduct systems for an advanced modpack experience.Advanced7 steps