Industrial Reborn · Power · Intermediate
How to Power Industrial Reborn Machines Using Tech Reborn Energy
Learn how to build a dedicated, high-throughput Tech Reborn power grid capable of sustaining Industrial Reborn machines without triggering brownouts. Because advanced blocks like the Powered Spawner and Mob Slaughter can drain your main base battery in seconds, mastering energy transfer rates and cable tiering is essential for reliable automation.
What you need
- Industrial Reborn machines (Powered Spawner, Mob Slaughter, Fluid Transposer, or livestock blocks)
- Tech Reborn generators (Diesel Generator, Gas Turbine, or Solar Panels depending on your power scale)
- Tech Reborn energy storage (MFE or MFSU for high-drain setups; BatBox or CESU for basic farms)
- Insulated Tech Reborn cables (Insulated Gold Cable, Insulated HV Cable, or Glass Fiber Cable)
- Tech Reborn Transformers (LV, MV, or HV Transformer) if stepping down voltage
- Wrench (from Tech Reborn) to orient storage unit output faces
- Soul Vial (filled with a captured mob) and Range Upgrades (optional)
Step by step
1Audit Your Machine Power Demands
Before laying a single cable, place your Industrial Reborn machines in the world and hover over their energy bars in their GUI, or check their tooltips in JEI/REI. Group your machines into two categories: low-drain utility blocks (like the Animal Feeder, Animal Baby Separator, and Fluid Transposer) and high-drain heavy machinery (specifically the Powered Spawner and Mob Slaughter). Notice the maximum energy capacity and the input rate listed on the tooltip so you know how much energy per tick your grid must supply.
Tip: Installing a Range Upgrade into any area-of-effect machine increases its working area, which often requires more frequent operations and steadier power flow.
2Build a Dedicated Energy Buffer
Never wire a Powered Spawner directly into your generators. Instead, place a dedicated Tech Reborn storage unit—at least an MFE, or an MFSU for multi-spawner setups—between your generators and your Industrial Reborn farm. Look for the colored dot on the casing of the MFE or MFSU; this dot represents the single energy output face. Use your Tech Reborn Wrench to rotate the storage block so the output dot faces toward your Industrial Reborn machines, leaving the other five sides open to receive power from your generators.
Tip: A dedicated buffer acts as a shock absorber, allowing your spawner to pull massive bursts of energy during a spawn cycle without starving your base's ore-processing machines.
3Select the Correct Tech Reborn Cable Tier
Match your cable's transfer limit to the output tier of your energy storage block. While Insulated Copper Cables work fine for an Animal Feeder running off a BatBox, they will severely bottleneck a Powered Spawner. Craft Insulated Gold Cables for medium-tier setups, or upgrade to Glass Fiber Cables if you are pulling from an MFSU to feed multiple spawners, a Mob Slaughter, and a Soul Extractor simultaneously.
Tip: Always craft the insulated variants of Tech Reborn cables; uninsulated cables running at medium or high tiers will electrocute you and any mobs wandering near your farm.
4Wire the Low-Drain Livestock Grid
For passive automation like an animal breeding setup, place a CESU or BatBox near your animal pens. Run a line of Insulated Copper or Gold Cable from the storage block's output dot directly to the Animal Feeder and Animal Baby Separator. Because these blocks only consume bursts of energy when actively feeding animals or teleporting babies (or adults, if using an Adult Filter Upgrade), a single low-tier line can easily chain three or four of them together in series.
5Wire the High-Drain Spawner and Slaughter Grid
Place your Powered Spawner inside your mob grinding room, and position the Mob Slaughter and Soul Extractor along the outer walls using Range Upgrades to cover the kill zone. Run a heavy backbone of Insulated HV Cable or Glass Fiber Cable from your MFE/MFSU output dot directly to the Powered Spawner first, then branch off to the Mob Slaughter and Fluid Transposer. By placing the spawner first in the cable path, you ensure it gets priority on energy ticks when a Soul Vial is inserted and active.
Tip: Attach a simple lever to the Powered Spawner or its dedicated MFE so you can cut the power instantly when you need to enter the room or swap out the Soul Vial.
6Stress-Test the Grid Under Full Load
Insert a captured mob inside a Soul Vial into the Powered Spawner, feed empty glass bottles into the Fluid Transposer, and allow the system to run continuously for three minutes. Open the GUI of the Powered Spawner and the Mob Slaughter simultaneously to watch their internal energy bars. If the energy bar in the Powered Spawner slowly drops after every spawn cycle and fails to recover before the next cycle, your cables or generators are bottlenecking; upgrade to a higher-tier Tech Reborn cable or add another generator to your MFE input line.
Tip: As the Mob Slaughter kills mobs and sends Liquid Experience to the Fluid Transposer to make experience bottles, monitor the Fluid Transposer's energy bar to ensure the spawner isn't starving it of power.
How it works
Industrial Reborn is built directly as an addon for Tech Reborn, meaning both mods share the exact same underlying energy API. You do not need any energy converters or flux bridges; Industrial Reborn machines natively accept Tech Reborn energy packets directly from Tech Reborn cables and battery blocks.
The logic behind separating your grids comes down to continuous versus intermittent draw. A Powered Spawner with an active Soul Vial acts as a continuous, heavy energy sink while it counts down a spawn cycle, whereas a Mob Slaughter only spikes in consumption at the exact moment it harvests a mob into loot and Liquid Experience. If both are placed on a low-tier cable, the cable's maximum transfer cap gets completely saturated by the spawner, leaving zero bandwidth for the Mob Slaughter to kill the newly spawned mobs.
Tech Reborn energy flows in discrete packets dictated by the output tier of your storage block (such as Low, Medium, or High voltage) and is capped by the maximum capacity of the cable you use. By routing your generators into an MFE or MFSU first, you compress erratic generator output into steady, high-capacity energy packets that keep hungry Industrial Reborn buffers completely topped off.
Common mistakes
- Using uninsulated high-tier cables near your mob farm: Uninsulated Gold or HV cables deal contact damage, which can prematurely kill your breeding livestock around an Animal Feeder or damage you while collecting Liquid Experience.
- Connecting cables to the wrong face of a Tech Reborn battery: Tech Reborn storage blocks only output energy from the single face marked with a dot. Connecting your Powered Spawner to any of the other five faces will result in zero power transfer.
- Running a Powered Spawner on basic Copper Cables: Even if you have ten generators running, a basic Copper Cable restricts the flow to a trickle, causing the Powered Spawner to stall or reset its progress bar mid-cycle.
- Forgetting to account for Range Upgrade overhead: Slotting Range Upgrades into a Mob Slaughter, Soul Extractor, or Animal Baby Separator expands the scanning area, meaning the machine processes more entities per cycle and drains its internal energy buffer much faster.
FAQ
Why is my Powered Spawner receiving power but not spawning anything?
Check two things: first, ensure you have placed a Soul Vial containing a captured mob inside the spawner's slot. Second, verify that your energy cable can supply power fast enough to meet the spawner's per-tick consumption rate; check the machine's GUI to see if the energy bar is actually filling up.
Can Industrial Reborn machines explode from receiving high-tier Tech Reborn voltage?
Unlike some classic Tech Reborn machines that require strict voltage step-downs via Transformers, addon machines typically just pull up to their internal buffer limit. However, if you are mixing regular Tech Reborn machines on the same line as your Fluid Transposer, you must use LV or MV Transformers so you do not blow up your Tech Reborn blocks.
Does the type of mob in the Soul Vial change how much power the Powered Spawner needs?
Mob spawners in this style of mod often scale energy costs or cycle times depending on the mob or current mod version. Always check the Powered Spawner's GUI and JEI tooltips after inserting a new Soul Vial to see if your current MFE/MFSU setup can sustain the drain.
Do the Range Upgrade or Adult Filter Upgrade require extra cable connections?
No. Upgrades are inserted directly into the upgrade slots inside the machine's GUI (such as putting an Adult Filter Upgrade into the Animal Baby Separator) and draw any necessary power directly from the machine's existing internal energy buffer.
By isolating your high-drain Industrial Reborn machines onto a dedicated Tech Reborn MFE or MFSU backbone with properly tiered insulated cables, you can run automated mob spawners and livestock farms continuously without draining your main base grid.