Industrial Foregoing · Setup guide · Advanced
Laser Drill & Ether Gas Guide: How to Farm Wither Bosses and Void Ores
Mastering the end-game of Industrial Foregoing requires automating two crucial resources: Ether Gas for advanced machine frames and infinite Void Ores for massive resource scaling. This guide walks you through constructing a blast-proof Wither Stasis Chamber to safely milk the Wither using a Fluid Laser Base, and configuring an Ore Laser Base at specific Y-levels to target rare minerals.
What you need
- Fluid Laser Base and Ore Laser Base
- Multiple Laser Drills (4 to 8 per base recommended)
- Stasis Chamber
- Wither Builder
- Purple Laser Lens (for Ether Gas) and assorted colored Laser Lenses (for specific ores)
- Soul Sand and Wither Skeleton Skulls
- Speed, Efficiency, and Processing Addons
- A robust Forge Energy (FE) power supply and fluid/item extraction pipes
Step by step
1Construct the Stasis Chamber Core
Place your Stasis Chamber on the ground and supply it with consistent Forge Energy. Click the 'Show Working Area' button in its GUI to visualize the 3x3x3 paralyzing field directly above the machine. Ensure this entire zone is clear of obstructions, as this is where the Wither will be trapped.
Tip: Install Range Addons if you want to give yourself a larger safety buffer, though the default range is sufficient for a single Wither.
2Position the Wither Builder
Dig down two blocks directly beneath the Stasis Chamber and place the Wither Builder facing upward. Alternatively, place it directly below the stasis field and offset the Stasis Chamber by one block horizontally so their working areas overlap. Pipe Soul Sand, Wither Skeleton Skulls, and power into the Wither Builder, but keep it disabled via Redstone control for now.
Tip: Use Wither-proof blocks to encase the immediate area just in case your power grid fails.
3Install the Fluid Laser Base and Drills
Place the Fluid Laser Base one or two blocks above the Stasis Chamber's working area so its downward working zone overlaps the trapped Wither. Open the Fluid Laser Base GUI and insert a Purple Laser Lens into the lens slot. Surround the Fluid Laser Base with Laser Drills (leaving a one-block air gap or placing them adjacent facing the base) and connect all drills to your power network.
Tip: The Fluid Laser Base itself does not accept power; only the surrounding Laser Drills consume FE to do the work.
4Spawn and Milk the Wither
Verify that the Stasis Chamber has full power and is active, then briefly pulse the Wither Builder to construct one Wither. As the Wither spawns, the Stasis Chamber will immediately freeze its AI and prevent its initial explosion from destroying blocks or allowing it to fly away. The Laser Drills will begin beaming energy into the Fluid Laser Base, slowly generating purple Ether Gas in its internal tank while healing the Wither so it never dies.
Tip: Connect a fluid pipe to the Fluid Laser Base to pump Ether Gas directly into a Black Hole Tank for long-term storage.
5Scout the Optimal Y-Level for the Ore Laser Base
To generate ores from nothing, craft an Ore Laser Base and check JEI for the exact Y-level (depth) requirements of your target mineral. Unlike older versions where a single base mined everything equally, modern Industrial Foregoing requires the Ore Laser Base itself to be placed at specific mining depths. Dig a room at that exact Y-coordinate for your mining setup.
Tip: Always double-check JEI in your specific modpack, as pack authors frequently customize ore weights, depths, and biome restrictions.
6Configure Laser Lenses and Power the Drills
Place the Ore Laser Base at your chosen Y-level and surround it with powered Laser Drills, just like the fluid setup. Craft the specific colored Laser Lens that corresponds to your desired ore in JEI (for example, a Light Blue Laser Lens for Diamond or White for Iron) and insert it into the Ore Laser Base. Attach an item extraction pipe or place an inventory adjacent to the base to collect the generated raw ores.
Tip: Fill both the Laser Drills and the Laser Base with Speed, Efficiency, and Processing Addons to drastically increase ore output per second.
How it works
The Laser Drill system operates on a master-worker hierarchy. The Ore Laser Base and Fluid Laser Base act as central controllers that hold lenses, verify environmental conditions (such as target entity, biome, and Y-level), and store the output. They do not consume power themselves. Instead, surrounding Laser Drills consume Forge Energy and transmit 'work packets' via particle beams into the base. The more drills you aim at a single base, the faster the operation progress bar fills.
The Stasis Chamber exploits entity AI suspension and health regeneration. Every tick it operates, it applies a complete movement and AI lock to any entity inside its working bounding box, preventing the Wither from targeting players or firing skulls. Simultaneously, the chamber applies a healing effect to entities inside its field, which directly counteracts the tiny amount of damage dealt by the Fluid Laser Base during Ether Gas extraction, keeping a single Wither alive indefinitely.
Ore generation relies on a weighted probability table tied to three variables: the inserted Laser Lens, the Y-level of the Ore Laser Base block, and the current biome. A lens does not guarantee only one ore; rather, it adds a massive statistical weight multiplier to matching ores while zeroing out ores outside the current Y-level bracket.
Common mistakes
- Powering the Wither Builder continuously without disabling it after one spawn, which floods the stasis field with dozens of Withers and causes severe server lag or catastrophic explosions if power stutters.
- Connecting power cables to the Fluid or Ore Laser Base instead of the surrounding Laser Drills; the bases have no internal energy buffer and rely entirely on the drills.
- Placing the Ore Laser Base at surface level when trying to farm deep-slate or nadir ores like Ancient Debris, resulting in the machine running at full power but producing only common stone or nothing at all.
- Forgetting to chunk-load the Stasis Chamber or letting its power buffer drain, which immediately releases the Wither to destroy your base.
FAQ
Why is my Fluid Laser Base working at 100% progress but producing no Ether Gas?
Check three things: ensure a Purple Laser Lens is inside the Fluid Laser Base, verify a Wither is actually inside the base's working area (toggle 'Show Working Area' to confirm overlap), and make sure the Wither has finished its initial charging phase.
How many Laser Drills can I connect to a single Laser Base?
You can place as many Laser Drills as can physically fit within a one-block radius around the Laser Base, leaving room for at least one cable or pipe connection on the base itself to extract the output.
Can I put multiple different colored lenses into one Ore Laser Base?
While the GUI has six slots for lenses, inserting multiple different colors dilutes the weight multiplier. For targeted farming of a specific resource, it is much more efficient to use one dedicated lens color per base at the exact optimal Y-level.
Does the Fluid Laser Base kill the Wither eventually?
The laser extraction process does inflict minor damage, which is why the Stasis Chamber is mandatory. An active Stasis Chamber heals entities inside its field faster than a standard set of Laser Drills can damage the Wither.
By pairing a continuously powered Stasis Chamber with a Purple-lensed Fluid Laser Base and deploying depth-tuned Ore Laser Bases, you can safely automate infinite Ether Gas and raw ores for all your end-game Industrial Foregoing manufacturing.