Galacticraft Legacy · Setup guide · Beginner
How to Refine Oil and Fuel Rockets: Complete Fuel Production Setup
Before you can leave Earth in Galacticraft Legacy, your rocket needs a reliable supply of refined rocket fuel. This guide walks you through finding underground crude oil, processing it in a Refinery, and setting up an automated Fuel Loader next to your Rocket Launch Pad. Mastering this processing chain ensures your spacecraft are always ready for interplanetary travel without tedious manual bucket transfers.
What you need
- Refinery
- Fuel Loader
- Rocket Launch Pad (9 individual pads for a 3x3 structure)
- Tier 1 Rocket (or any compatible Galacticraft spacecraft)
- Fluid Pipes and a Standard Wrench
- Empty Canisters or Vanilla Buckets
- Power Source (such as a Coal Generator or Basic Solar Panel) and Aluminum Wires
- Portable Oil Extractor (optional, for easier manual gathering)
Step by step
1Locate and Collect Crude Oil
Explore the Overworld to find black Crude Oil pockets, which frequently spawn underground between Y-levels 20 and 40, or occasionally bubble up as surface geysers in desert and ocean biomes. Once you find a pool, use Empty Canisters or standard Iron Buckets to scoop up the liquid. If you are struggling to scoop individual source blocks, craft a Portable Oil Extractor and hold right-click to drain the reservoir directly into canisters in your inventory.
Tip: Be careful not to fall into Crude Oil pools; swimming in oil drastically slows your movement and makes it difficult to jump out.
2Place and Power the Refinery
Set down your Refinery at your base and inspect its sides to find the colored ports. Connect Aluminum Wires from your power generator to the green electrical input socket on the Refinery. Wait a moment and open the Refinery GUI to confirm that the internal energy bar is filling up.
Tip: Check Just Enough Items (JEI) for exact wire crafting recipes and generator output rates if you are unsure how much power you need.
3Refine Crude Oil into Fuel
Open the Refinery interface and place your filled Oil Canisters or Oil Buckets into the top-left input slot. The machine will automatically drain the containers into its internal tank, which you can see filling up with black liquid on the left side. Once powered, the Refinery automatically converts the Crude Oil into golden Fuel in the right-hand tank, allowing you to collect it with an Empty Canister in the top-right slot or pipe it out directly.
Tip: Refining oil is a 1:1 conversion process, meaning you do not lose any fluid volume during refinement.
4Assemble the Rocket Launch Pad
Clear a flat area outside with an unobstructed view of the sky above. Place nine Rocket Launch Pads in a 3x3 square on the ground. When placed correctly, the center block will automatically raise slightly, merging the nine individual blocks into a single functional launch structure.
5Connect the Fuel Loader
Place your Fuel Loader directly adjacent to any of the outer eight blocks of the 3x3 Rocket Launch Pad. Connect an Aluminum Wire from your power grid to the green power socket on the Fuel Loader. Because the Fuel Loader physically touches the launch pad, it automatically establishes a data and fluid link with any rocket sitting on the pad.
Tip: Avoid placing the Fuel Loader on a diagonal corner of the 3x3 pad, as diagonal blocks do not register as connected.
6Automate Fluid Transfer with Pipes
Locate the fluid output port on your Refinery and the fluid input port on your Fuel Loader. Run a line of Galacticraft Fluid Pipes between these two ports. Equip your Standard Wrench and right-click the pipe segment directly attached to the Refinery's output port; this changes the pipe end into extraction mode, pulling golden Fuel out of the Refinery and pushing it into the Fuel Loader.
Tip: You can skip Fluid Pipes initially by carrying Fuel Canisters manually from the Refinery into the Fuel Loader's top-left input slot.
7Fuel Your Rocket for Launch
Hold your Rocket in your hand and right-click the raised center block of the Rocket Launch Pad to mount it. Open the Fuel Loader GUI and verify that both the energy bar and the golden fuel tank are filled. Click the 'Load Fuel' button inside the interface to begin pumping fuel into the rocket until its internal gauge reaches 100 percent.
How it works
Galacticraft Legacy utilizes a directional socket system for all its machines. Every machine features color-coded and icon-coded ports on its casing: green sockets accept electrical power via Aluminum Wires, while blue or liquid-marked ports handle fluid input and output. Understanding these ports is essential because wires and pipes will only visually and functionally connect to their matching socket types.
Fluid Pipes in Galacticraft are passive by default, meaning simply connecting two machines will not move liquids automatically. Using a Standard Wrench on the pipe connection point toggles that specific pipe end into an active extraction valve. Once toggled, it continuously pulls fluid from the attached machine's output tank and distributes it along the pipe network to any available input tanks.
The Rocket Launch Pad acts as a multiblock proxy. When the nine pads combine into a 3x3 structure, the outer ring blocks serve as extension ports for the rocket sitting in the center. Any support machine—such as a Fuel Loader or Cargo Loader—placed directly against the outer edge communicates through the pad into the rocket's internal tanks without requiring extra pipes between the loader and the spacecraft.
Common mistakes
- Trying to load Crude Oil directly into the Fuel Loader: Rockets cannot burn unrefined oil; you must run the black oil through a Refinery first to turn it into golden Fuel.
- Forgetting to wrench the Fluid Pipe: If fuel stays stuck inside the Refinery despite having a connected pipe, remember to right-click the pipe segment touching the Refinery with a Standard Wrench to enable extraction.
- Connecting pipes or wires to the wrong machine face: If a pipe or wire refuses to connect to a machine, rotate the machine using your Standard Wrench until the proper fluid or electrical socket faces your cable line.
- Placing the Fuel Loader one block away from the Launch Pad: The Fuel Loader must physically touch the edge of the 3x3 launch pad; you cannot bridge the gap between a Fuel Loader and a Launch Pad using Fluid Pipes.
FAQ
Can I use fluid pipes from other tech mods?
Yes, Galacticraft Legacy fluids are registered inside the standard Forge fluid dictionary, so fluid pipes and tanks from most other 1.12.2 tech mods will transfer and store Crude Oil and Fuel without issue.
What happens to the fuel inside my rocket if I break it?
If you break a fueled rocket off the launch pad to pick it up, all the fuel currently loaded inside the spacecraft is lost. Make sure you are completely ready to launch before starting the Fuel Loader.
Why happens if I put water or lava into the Refinery?
The Refinery is strictly coded to accept only Crude Oil. Attempting to pump water, lava, or incompatible liquids into the input port simply will not work.
How do I take fuel back out of a canister?
You can empty a filled Fuel Canister by placing it into the input slot of a Fuel Loader, or by piping fluid out of a machine where the canister has been drained.
By extracting underground Crude Oil, converting it inside a powered Refinery, and piping the resulting Fuel into an adjacent Fuel Loader, you create a reliable fueling station ready to launch your Galacticraft Legacy rockets across the solar system.