Ender IO · Progression · Advanced
Dark Steel & End Steel Armor Guide: All Upgrades and Empowered Tiers
Mastering Ender IO's armor progression unlocks near-invulnerability, high-speed mobility, and customized utility in a single modular suit. This guide covers the complete path from basic Dark Steel to End Steel and Stellar tiers, explaining how to install Empowered upgrades, manage energy shielding, and optimize your setup using the Dark Steel Anvil.
What you need
- Alloy Smelter (preferably upgraded beyond Simple tier with at least a Double-Layer Capacitor)
- SAG Mill (for crushing Obsidian and other raw materials)
- Dark Steel Anvil (Standard anvils have level caps that prevent high-tier upgrades)
- Ample supply of Iron, Coal, Obsidian, End Stone, and Ender Pearls
- Vibrant Crystals, Octadic Capacitors, and higher-tier capacitors (if the Endergy module is installed)
- Lots of Experience (XP) Levels (consider building an Experience Obelisk for easy storage)
- Wired Charger or Wireless Charger connected to a strong Micro Infinity (µI) or RF power grid
Step by step
1Produce Dark Steel and End Steel Ingots
Begin by running Obsidian through your SAG Mill to obtain Powdered Obsidian, and crush Coal into Coal Powder. In your Alloy Smelter, combine Iron Ingots, Coal Powder, and Powdered Obsidian to smelt Dark Steel Ingots. Once you have access to the End dimension, combine End Stone, Dark Steel Ingots, and Powdered Obsidian in the Alloy Smelter to forge End Steel Ingots. If your modpack includes the Endergy module, continue this chain by smelting Stellar Alloy Ingots using Clay, Nether Stars, and Melodic Alloy (check JEI for exact recipe ratios in your version).
Tip: Place a Grinding Ball (like Dark Steel or End Steel Balls) inside your SAG Mill to drastically increase bonus outputs when crushing Obsidian and Coal.
2Craft the Base Armor and Dark Steel Anvil
Craft your full suit of Dark Steel Armor (Helmet, Chestplate, Leggings, Boots) using standard vanilla armor patterns. Before upgrading directly to End Steel, note that you will need a Dark Steel Anvil, crafted from Dark Steel Blocks and Ingots. A vanilla Anvil has a hard cap of 40 XP levels per operation, whereas the Dark Steel Anvil removes this limit, allowing you to apply expensive late-game upgrades and combine heavily enchanted gear.
Tip: If you plan to upgrade from Dark Steel to End Steel later, verify in JEI whether your specific version preserves upgrades during crafting; otherwise, hold off on expensive upgrades until you craft the End Steel or Stellar set.
3Understand the Upgrade Blank System (Version Dependent)
Depending on your Minecraft version of Ender IO, upgrades are applied differently. In modern versions (1.12.2+), you must first craft Dark Steel Upgrade Blanks, apply the specific upgrade item to the blank, activate the blank by right-clicking while holding it (which consumes your XP levels), and then combine it with your armor in the Dark Steel Anvil. In older legacy versions, you simply combine the armor piece and the raw catalyst item (like a Vibrant Crystal) directly inside the Anvil for an XP cost.
Tip: Always check the tooltip of your armor while holding Shift to see available upgrade rules, capacity, and prerequisites.
4Apply the Empowered Tiers for Energy Shielding
The most critical upgrade for every armor piece is the 'Empowered' line, which grants the gear an internal energy buffer and unlocks damage absorption. Start by applying Empowered I using a Vibrant Crystal. Next, progress linearly through Empowered II (Basic Capacitor), Empowered III (Double-Layer Capacitor), and Empowered IV (Octadic Capacitor). For End Steel and Stellar armor, you can push even further into Empowered V if your version supports higher-tier capacitors. Each tier significantly increases the energy storage capacity and the percentage of incoming damage that is deflected by energy instead of durability.
Tip: You cannot skip Empowered tiers; you must apply I, II, III, and IV in strict sequential order on each individual piece of armor.
5Install Mobility Upgrades (Boots and Leggings)
Your Leggings and Boots dictate your ground speed and traversal capabilities. Apply the Speed Boost upgrade (using Sugar and Redstone components) to your Leggings to dramatically increase sprint and walk speed, scaling it up to three tiers. On your Boots, install Jump Boost (using Pistons) to leap over obstacles and effortlessly enable Step Assist, allowing you to walk up full blocks without jumping. You can also add the Flippers upgrade (using Water Lilies) to the Boots to eliminate underwater movement penalties.
Tip: Bind the 'Step Assist' and 'Speed' toggle keys in your Minecraft Controls menu so you can temporarily disable high speed when building on narrow ledges.
6Configure Flight and Gliding (Chestplate)
The Chestplate serves as your primary aerial utility slot. Craft a Glider Wing and Glider assembly from Dark Steel and Phantom Membranes or Leather (check JEI), then apply the Glider upgrade to your Chestplate. When falling, press the Glider toggle hotkey to deploy hang-glider wings, converting downward momentum into rapid horizontal flight. Alternatively, if your pack allows it, you can apply the Elytra upgrade instead, which integrates vanilla Elytra mechanics directly into the armored chestplate without sacrificing defense.
Tip: Glider and Elytra upgrades are mutually exclusive on the same Chestplate; choose Glider for controlled, low-speed precision or Elytra for firework-boosted travel.
7Add Utility and Sensory Upgrades (Helmet)
The Helmet houses quality-of-life sensory upgrades. Apply the Night Vision upgrade (using a Potion of Night Vision) to gain toggleable, particle-free darkness visibility on demand. Add the Sound Locator (using a Note Block) to display visual icons on your HUD whenever nearby entities make noise, which is useful for tracking mobs through walls. Finally, consider adding the Solar upgrade (using Photovoltaic Cells) to the Helmet; during daylight hours, it passively generates energy and trickles it down to charge the rest of your worn armor and held tools.
Tip: If you use Thaumcraft or Forestry in the same modpack, check JEI for compatibility upgrades like Goggles of Revealing or Naturalist's Eye for your Helmet.
8Install Inventory and Combat Modules
In versions using the slot-based upgrade system, you can expand your personal storage by applying Inventory Upgrades to your armor slots, giving you extra item slots accessible via a dedicated hotkey. You can also install the Explosive Carpet or Thorns upgrades for combat utility, or the Anvil Upgrade, which lets you open a portable repair interface anywhere. Keep an eye on the 'Anvil Upgrade Capacity' or 'Upgrade Points' tooltip on your armor, as End Steel and Stellar sets offer notably more capacity points than standard Dark Steel.
Tip: Pair your armor with a Dark Steel or End Steel Sword upgraded with 'The Ender' head-drop catalyst and Empowered IV so it allows you to teleport using travel anchors and blocks incoming damage with energy.
9Manage Energy and Charging Automation
Because Empowered armor relies entirely on Micro Infinity (µI) or RF to absorb damage and run speed boosts, running out of power mid-combat drops your protection back to base iron-level values. Set up a Wireless Charger in the center of your base connected to your main power Capacitor Bank; this will invisibly keep your suit at 100% charge while you craft. For long expeditions, carry a charged vibrant capacitor bank or a modpack-compatible wireless battery bauble in your inventory to replenish your suit on the move.
Tip: A Wired Charger charges items considerably faster than a Wireless Charger; use it for the initial massive charge needed after applying Empowered IV or V.
How it works
The core logic behind Ender IO armor is the Damage-to-Energy Conversion ratio governed by the Empowered upgrade. Without Empowered installed, Dark Steel and End Steel act like high-durability conventional armor. Once Empowered I is applied and charged with energy, a specific percentage of all incoming physical and durability damage is intercepted. Instead of reducing the item's durability bar and hurting your health, the armor drains a calculated amount of Micro Infinity (µI) per point of damage.
As you upgrade from Empowered I up to Empowered IV or V, two scaling mechanics occur simultaneously: the internal battery capacity multiplies, and the damage absorption percentage increases (reaching very high absorption thresholds at top tiers). Furthermore, advancing from Dark Steel to End Steel and Stellar Armor raises the base armor toughness, increases the maximum energy capacity ceiling, and provides more upgrade capacity points so you don't have to choose between combat resilience and utility modules.
Active upgrades like Speed, Jump, Night Vision, and Step Assist operate on a continuous or event-driven energy drain model. For example, sprinting with Speed III drains energy per tick of movement, while Night Vision drains a small steady trickle while toggled on. If the armor's energy buffer hits zero, all active modules automatically shut off, and the suit reverts to consuming physical durability until recharged.
Common mistakes
- Using a Vanilla Anvil for High-Tier Upgrades: Vanilla anvils refuse operations that cost 40 levels or more ('Too Expensive!'). Always craft and use a Dark Steel Anvil, which removes the level cap entirely and lasts significantly longer.
- Forgetting to Charge After Applying Empowered: Applying Empowered I through IV leaves the newly expanded battery completely empty. Players often jump straight into combat after upgrading and wonder why their armor loses durability and fails to protect them.
- Leaving Speed and Night Vision Toggled On While Idle: Active upgrades drain power continuously or during slight movements. Bind hotkeys to toggle off Speed, Jump, and Night Vision when standing around your base if you aren't inside the range of a Wireless Charger.
- Repairing Empowered Armor with Ingots When It Just Needs Power: When an Empowered suit is charged, it barely loses durability. If it does take durability damage while unpowered, recharge it first, and only use Dark Steel or End Steel ingots in an anvil (or Mending) when the physical durability bar is genuinely low.
FAQ
What is the actual difference between Dark Steel, End Steel, and Stellar Armor?
Each higher tier provides higher base armor defense, higher armor toughness, a much larger energy capacity when Empowered, a higher percentage of damage absorbed by power, and more upgrade capacity points for installing extra modules.
Why won't my upgrade combine with my armor in the Dark Steel Anvil?
Check three things: First, ensure you have applied required prerequisite upgrades (e.g., Empowered I before Empowered II). Second, in modern versions (1.12.2+), make sure you right-clicked the upgrade plate in your hand to activate it with XP before putting it in the anvil. Third, verify your armor hasn't run out of available upgrade capacity points.
Can I combine standard Vanilla Enchantments like Protection IV and Mending with Dark Steel upgrades?
Yes! Ender IO armor accepts standard enchantments via enchanted books in the Dark Steel Anvil or an Enchanting Table. Stacking Protection IV with Empowered IV makes you nearly invincible to conventional damage.
How do I stop my Leggings from making me run too fast indoors?
Open your Minecraft Controls menu, scroll to the Ender IO section, and bind a key to 'Speed' and 'Step Assist'. Pressing these keys in-game lets you toggle the movement boosts on and off instantly.
By forging End Steel or Stellar armor, maxing out the Empowered tiers in a Dark Steel Anvil, and maintaining a steady Wireless Charger infrastructure, you transform standard protective gear into a customizable, energy-shielded exosuit.