Ender IO · Addon guide · Intermediate
How to Use Ender IO Addon Conduits: Refined Storage, AE2, and Mekanism Gas
Learn how to consolidate your base's infrastructure by combining Ender IO addon conduits for Applied Energistics 2, Refined Storage, and Mekanism gases into a single block space alongside your standard power and item lines. You will also master using Conduit Facades to completely hide these complex cable bundles inside your walls and floors. This technique eliminates messy cable spaghetti and lets you connect multi-mod automation setups cleanly through just one face of any machine.
What you need
- Ender IO (with the Conduits and relevant addon modules installed)
- Yeta Wrench (essential for configuring, hiding, and removing single conduits)
- Conduit Binder (made by smelting Conduit Binder Composite)
- Alloy Smelter and The Vat (or modern equivalent machines depending on your modpack version, check JEI)
- ME Conduits / Dense ME Conduits (requires Applied Energistics 2)
- Refined Storage Conduits (requires Refined Storage)
- Gas Conduits / Pressurized Gas Conduits / Ender Gas Conduits (requires Mekanism)
- Conduit Facades and a Painting Machine
Step by step
1Verify and Craft Your Addon Conduits
Before planning your layout, open JEI and search for ME Conduit, Refined Storage Conduit, or Gas Conduit to verify which addon modules are active in your modpack. Craft a batch of Conduit Binder Composite using clay, gravel, and sand, then smelt it into Conduit Binder. Combine this binder with the specific mod materials—such as AE2 Fluix dust or crystals, Refined Storage Quartz Enriched Iron, or Mekanism alloys—according to your version's JEI recipes.
Tip: If you are using Applied Energistics 2, craft Dense ME Conduits for your main backbone lines to carry the maximum number of channels, and standard ME Conduits for branching off to machines.
2Lay the Core Power and Item Backbone
Start by placing your standard Ender IO Energy Conduits and Item Conduits along the path connecting your machines. Right-click the starting block with the Energy Conduit, then drag it along your trench or wall. Next, hold your Item Conduits and right-click directly onto the existing Energy Conduits to merge them into the same block space.
Tip: You do not need to shift-click when adding a different conduit type to an existing bundle; just aim directly at the conduit hitbox and right-click.
3Bundle AE2 ME or Refined Storage Conduits
Equip your ME Conduits or Refined Storage Conduits and right-click the existing conduit bundle to thread your digital storage network through the exact same block space. For AE2, connect one end of the ME Conduit to your ME Controller or an existing Fluix Cable, and the other end to your AE2 devices like ME Interfaces. For Refined Storage, run the Refined Storage Conduit directly from your Controller to remote Crafters, Importers, or Exporters.
Tip: Because Ender IO ME Conduits cannot accept flat cable-multipart versions of AE2 Interfaces or Storage Buses, you must use the full-block versions of those AE2 machines next to the conduit.
4Integrate Mekanism Gas Conduits
If your modpack includes Mekanism gas support for Ender IO, take your Gas Conduits (or the higher-tier Pressurized and Ender Gas Conduits) and right-click them onto the same conduit bundle. Connect these lines directly to the gas output and input sides of Mekanism machines like the Electrolytic Separator, Purification Chamber, or Pressurized Reaction Chamber. Just like Ender IO Fluid Conduits, you must configure the connection ends to extract or insert gases.
Tip: Ender Gas Conduits allow instant teleportation of gases along the line and often support multiple gas types via color channels, making them superior to standard Mekanism Pressurized Tubes for compact builds.
5Configure Connections and Channels
Right-click the connector plate where the conduit bundle touches a machine using an empty hand or your Yeta Wrench to open the Conduit GUI. Use the tabs at the top of this menu to switch between Energy, Item, Gas, or Redstone configurations for that specific machine face. Set your Gas and Item conduits to 'Extract' (Disable Redstone Signal, or Always Active) on output machines and 'Insert' on receiving machines, assigning matching color channels so gases and items go to the right places.
Tip: ME Conduits and Refined Storage Conduits are passive network carriers, meaning they usually connect automatically without needing Insert/Extract configuration in the GUI.
6Isolate Lines with the Yeta Wrench
When running multiple parallel conduit bundles or placing machines side-by-side, unwanted connections can occur between adjacent blocks. Hold your Yeta Wrench and right-click on the small arm connecting two conduits or a conduit to a machine to sever that specific link. If you accidentally disconnect a line, right-click the severed stub with the Yeta Wrench again to restore the connection.
Tip: Shift-right-clicking a specific conduit core or connector with the Yeta Wrench will instantly break and pick up only that single conduit type, leaving the rest of the bundle completely intact.
7Paint and Apply Conduit Facades
To hide your wiring, craft Conduit Facades using Conduit Binder and place them inside a powered Painting Machine alongside any solid block you want to mimic, such as stone bricks or factory blocks. Once painted, take the Conduit Facade and right-click it directly onto any conduit bundle in your world. The bundle will instantly take on the texture of a full solid block while all internal power, items, gases, and digital storage data continue flowing seamlessly.
Tip: When holding any Conduit or a Yeta Wrench in your hand, all placed Conduit Facades nearby automatically turn translucent, allowing you to see, access, and configure the cables inside without breaking the cover.
How it works
In modded Minecraft, every standard block space can normally hold only one Tile Entity (a block that stores complex data, like a machine or a pipe). When you run native Mekanism Pressurized Tubes, AE2 Fluix Cables, and thermal power cables together, they each demand their own block space, forcing you to build wide three-block maintenance tunnels behind your machines. Ender IO solves this by turning a single block space into a unified container Tile Entity called a Conduit Bundle.
When you add an addon conduit—like an ME Conduit, Refined Storage Conduit, or Gas Conduit—into an existing bundle, Ender IO does not place a new block. Instead, it attaches a sub-component to the existing bundle's data structure. The bundle then acts as a translator: on the outside, it exposes the specific Forge capabilities or APIs that AE2, Refined Storage, and Mekanism look for (such as an AE2 grid node, an RS network node, or a Mekanism gas handler). This allows a single block face on a machine to receive RF/FE power, push items, pull Mekanism chemicals, and connect to a digital storage network simultaneously.
Conduit Facades work by storing the block ID and texture data of the source block inside the Conduit Bundle's rendering data. Instead of rendering the 3D pipe models every frame, the game renders a standard cube using the facade's texture, which actually helps reduce visual lag in massive factories while keeping your base clean.
Common mistakes
- Attempting to attach AE2 cable sub-parts (like flat ME Terminals, Storage Buses, or Level Emitters) directly to an Ender IO ME Conduit. Because Ender IO uses its own conduit bundle system rather than AE2's multipart system, you must either use the full-block versions of AE2 devices or transition to a single piece of standard AE2 Fluix Cable where you need to mount a flat panel.
- Forgetting to set Mekanism machine sides to 'Output' or failing to set the Ender IO Gas Conduit connection to 'Always Active' on extract mode. Mekanism machines are very strict about sidedness; ensure the machine's internal Gases tab has the correct side colored for output/input, and that the Ender IO conduit plate is set to extract.
- Breaking a conduit bundle with a pickaxe instead of a Yeta Wrench. Using a pickaxe often damages or destroys the entire bundle at once, spilling all conduit types onto the floor, whereas shift-right-clicking with a Yeta Wrench lets you surgically remove just one conduit type.
- Overloading standard ME Conduits with too many devices. Just like AE2's standard cables, standard ME Conduits only carry 8 channels, while Dense ME Conduits carry 32. If machines stop showing up on your network, you have likely routed more than 8 devices through a non-dense bottleneck.
FAQ
Why don't I see Gas Conduits or Refined Storage Conduits in JEI?
Ender IO is modular and constantly evolving across Minecraft versions. You must have the target mod (Mekanism, AE2, or Refined Storage) installed, and your version of Ender IO must include the specific compatibility addon module. In newer rewrites of Ender IO, some addon conduits may still be in development or provided by separate community addon mods.
Can I connect an Ender IO ME Conduit directly to a standard AE2 Fluix Cable?
Yes. Ender IO ME Conduits seamlessly connect to standard AE2 Fluix, Smart, and Covered Cables, allowing you to use Ender IO conduits for tight machine walls and hidden floor runs, then switch back to AE2 cables where you need to attach flat panels or monitors.
Do lowest-tier Gas Conduits suffer from residual gas blockage like Fluid Conduits?
Yes, standard and Pressurized Gas Conduits hold an internal buffer of a single gas type at a time. To pump multiple different Mekanism gases through the exact same pipe line simultaneously without clogging, upgrade to Ender Gas Conduits, which transport gases instantly without blocking.
How do I remove a Conduit Facade without breaking the conduits inside?
Equip your Yeta Wrench, make sure you can see the translucent facade outline, and shift-right-click the outer edge of the block (or break the facade while holding a wrench, depending on your version). The facade will pop off cleanly, leaving your conduit bundle untouched.
By combining Ender IO's ME, Refined Storage, and Mekanism Gas addon conduits with standard power and item lines under painted Conduit Facades, you can run five different cross-mod networks through a single hidden block space.