Modular Force Field Systems (MFFS) · Late game
MFFS Force Manipulator Tunnel Bore & Quarry
This setup creates a self-propelled, unstoppable underground tunnel bore and quarry using Modular Force Field Systems (MFFS). By combining a Force Manipulator with a Force Field Projector outfitted with Block Disintegration and Collection Modules, the entire rig breaks terrain ahead of it, vacuums the drops into storage, and shifts itself forward automatically. It is one of the fastest and cleanest late-game mining machines available, requiring zero rails or support framing.
- Footprint
- 5x5x5 blocks (mobile platform)
- Power
- High (~10-50 kFE/t depending on field scale; check JEI and config)
- Throughput
- 1 full cross-section slice every 3-5 seconds
- Difficulty
- advanced
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Force Manipulator | 1 |
| Force Field Projector | 1 |
| Coercion Deriver | 1 |
| Fortron Capacitor | 1 |
| Cube Mode | 2 |
| Disintegration Module | 1 |
| Collection Module | 1 |
| Silence Module | 1 |
| Speed Module | 32 |
| Scale Module | 24 |
| Translation Module | 16 |
| Capacity Module | 8 |
| Frequency Card | 4 |
| Chest (or Dimensional Storage) | 2 |
| Redstone Repeater | 6 |
| Redstone Comparator | 2 |
| Redstone Torch | 2 |
| Redstone Dust | 10 |
| Lever | 1 |
Build it step by step
1Build the Mobile Core Platform
Construct a compact 3x3x3 or 5x5x5 floating platform out of non-tile-entity blocks like Iron Blocks or Smooth Stone. Make sure it is completely detached from the surrounding cave walls so the Force Manipulator does not grab unintended terrain when shifting.
2Install the Fortron Power Network
Place your high-capacity energy source, the Coercion Deriver, and the Fortron Capacitor onto the platform. Shift-right-click a Frequency Card on the Fortron Capacitor to generate a random frequency, then insert matching Frequency Cards into both the Coercion Deriver and Capacitor. Insert Capacity and Speed Modules into the Capacitor to maximize Fortron transfer.
3Mount and Configure the Cutting Head
Place the Force Field Projector near the front of the platform and give it a linked Frequency Card. Insert a Cube Mode into the center slot, along with the Disintegration Module, Collection Module, and several Speed Modules. Use Scale Modules in the directional slots to make the field wider and taller than your platform, and use Translation Modules to push the cutting field straight ahead of the rig.
4Attach Ore Storage
Place your Output Chest (or a wireless storage chest from another mod) directly adjacent to the Force Field Projector. Because the Collection Module is installed inside the Projector, any blocks broken by the Disintegration field will automatically insert into this adjacent inventory.
5Set Up the Force Manipulator
Place the Force Manipulator near the center of your platform and insert a linked Frequency Card and a Cube Mode. Set its movement direction to face the front of your tunnel bore. Use Scale and Translation Modules so the green bounding box encapsulates your entire platform, including all machines, power blocks, and redstone wiring, without touching the cave walls.
6Wire the Two-Stage Redstone Sequencer
Build a simple vanilla redstone clock using repeaters and comparators on the platform, controlled by a master Lever. Split the clock signal into two branches: the first branch activates the Force Field Projector for 2-3 seconds to mine the rock ahead, and the second delayed branch sends a short pulse to the Force Manipulator once the Projector turns off.
7Dry Run and Field Alignment
Before turning on the clock, temporarily remove the Disintegration Module and activate the Projector to verify the force field hologram clears enough space for the entire rig. Toggle the Force Manipulator's preview box to ensure no blocks on your platform are left behind. Once verified, reinstall the Disintegration Module and flip the master Lever.
How it works
The core mechanic behind this setup is the conversion of standard Forge Energy (FE) into Fortron via the Coercion Deriver. The Fortron Capacitor acts as a wireless distributor, beaming Fortron simultaneously to the Force Field Projector and the Force Manipulator as long as they share the same Frequency Card. This eliminates the need for sprawling cable networks that might break or disconnect during block movement.
The Force Field Projector acts as the drill head. Normally, it generates solid force field blocks, but the Disintegration Module alters its behavior so that it immediately harvests any natural block intersecting the field blueprint. The Collection Module intercepts these block drops before they even spawn in the world as entities, routing them straight into the inventory touching the Projector.
Movement is handled by a strict two-phase redstone timing cycle. It is critical that the Force Field Projector turns off before the Force Manipulator fires; otherwise, the Manipulator may try to shift the unbreakable force field blocks or fail the movement check entirely. Phase one projects the disintegrating wall directly in front of the bore, clearing a 1-block-deep slice of stone and ore. Phase two cuts power to the Projector and pulses the Force Manipulator, sliding the entire machine assembly one block forward into the newly excavated space.
Upgrades and scaling
- Replace the Cube Mode with a Custom Mode or stack multiple Scale Modules in the Projector to excavate massive 15x15 or larger quarry tunnels per step.
- Add a Sponge Module to the Force Field Projector so the bore automatically deletes water and lava pockets before they can flow onto your redstone components.
- Install a Camouflage Module or Dome Module on a secondary Projector to leave behind a clean glass or stonebrick tunnel lining as the bore moves forward.
- Introduce Catalyst items (such as Forcicium or whatever catalyst item your specific version of MFFS uses; check JEI) into the Coercion Deriver to dramatically multiply Fortron generation efficiency.
Common mistakes
- Leaving the Force Field Projector active while the Force Manipulator pulses, which causes the Manipulator to get obstructed by its own force field blocks.
- Forgetting to match the Frequency Cards across the Coercion Deriver, Fortron Capacitor, Projector, and Manipulator, resulting in machines stalling with zero Fortron.
- Sizing the Force Manipulator bounding box one block too small, leaving the rear redstone repeaters or power cells stranded behind in the tunnel.
- Not adding enough Speed Modules to the Force Field Projector, causing the rig to move forward before the Disintegration field finishes breaking high-hardness blocks like Obsidian or Deepslate.
FAQ
Why is my Force Manipulator making a buzzer sound and refusing to move?
This happens if an immovable block (like Bedrock or an active Force Field block) is inside the Manipulator's bounding box, or if the destination space ahead is not completely empty. Check your Translation and Scale modules on both machines.
Where do the mined items go if my chest fills up?
If the inventory adjacent to the Force Field Projector is completely full, the Collection Module cannot deposit the items and they will either drop on the ground at the field location or be voided depending on your modpack version.
How do I power the rig once it moves away from my base cables?
Either place a high-capacity energy cell directly on the moving platform and recharge it periodically, or use a wireless power transfer block from another mod in your pack that supports spatial movement.