Integrated Dynamics · Late game

Logic-Controlled Reactor Monitoring & Failsafe System

This setup provides an automated, high-precision monitoring and failsafe system for late-game reactors using Integrated Dynamics. By reading real-time energy saturation, internal temperatures, and fuel buffers, it dynamically toggles reactor operation to prevent waste and catastrophic meltdowns. Building this guarantees base safety while providing a live, customizable status wall in your control room.

Footprint
7x5x4 blocks
Power
~50 FE/t (if network energy consumption is enabled in configs, check JEI)
Throughput
1-tick reaction speed (20 checks/sec)
Difficulty
advanced

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

High-Voltage FEFE Fill Ratio DataNBT Heat/Damage DataFuel Slot CountVariable Card: Buffer Variable Card: Core TeVariable Card: Fuel LeNetwork FERelational & Boolean OBoolean: Run ReactorBoolean: Emergency AlaFormatted Status StrinRedstone Control SignaLate-Game Reactor PowerPortPOWERHigh-Capacity EnergyBufferSTORAGEMachine Reader (Buffer)INPUTBlock Reader (ReactorCore)INPUTInventory Reader (FuelInput)INPUTVariable StoreSTORAGELogic ProgrammerCONTROLEnergy BatteryPOWERRedstone Writer (ReactorToggle)OUTPUTAudio Writer (Alarm)OUTPUTDisplay Panel(Telemetry)OUTPUT
InputPowerStorageOutputControlItemEnergySignal

Materials

ItemCount
Logic Cable24
Variable Store2
Machine Reader1
Block Reader1
Inventory Reader1
Redstone Writer1
Audio Writer1
Display Panel4
Variable Card32
Logic Programmer1
Labeller1
Wrench1
Energy Battery1

Build it step by step

  1. 1Establish the Logic Network Backbone

    Run Logic Cables from your reactor and main energy storage bank into a nearby control room. Place two Variable Stores and an Energy Battery against the cable line in your control room to power the network and hold your logic dependencies.

  2. 2Attach the Readers

    Place a Machine Reader facing your main energy buffer block, an Inventory Reader on the reactor's fuel port, and a Block Reader facing the reactor controller or redstone port. These will extract raw telemetry data from your machinery every tick.

  3. 3Mount the Writers and Displays

    Attach a Redstone Writer facing the reactor's control port to handle activation and shutdowns. In your control room, place four Display Panels on the wall for telemetry and an Audio Writer nearby to serve as an audible meltdown alarm.

  4. 4Bind Base Data Variables

    Insert blank Variable Cards into the Machine Reader's 'Energy Fill Ratio' slot, the Inventory Reader's 'Fill Ratio' slot, and the Block Reader's 'Block NBT' slot. Immediately use a Labeller to name these cards 'Buffer_Fill', 'Fuel_Ratio', and 'Core_NBT' so you do not mix them up.

  5. 5Program the Energy Threshold Logic

    Open your Logic Programmer. Create a constant Float variable set to 0.85, then use the 'Less Than (<)' relational operator to compare 'Buffer_Fill' against your 0.85 float. Label this resulting card 'Need_Power' and place both the base cards and operator cards into the Variable Store.

  6. 6Extract NBT Heat and Failsafe Conditions

    In the Logic Programmer, use the 'NBT Compound Value Double' (or Integer, depending on your reactor mod; check the NBT tag structure via a Display Panel first) to extract the temperature tag from 'Core_NBT'. Compare this temperature using 'Less Than (<)' against a safe threshold constant to create a 'Temp_Safe' boolean card.

  7. 7Combine Booleans and Activate Writers

    Use the 'And (&&)' operator in the Logic Programmer to combine 'Need_Power' and 'Temp_Safe' into a master card labeled 'Enable_Reactor'. Insert 'Enable_Reactor' into the Redstone Writer's boolean slot, and place all preceding dependency cards into the Variable Store. Configure an inverted 'Not (!)' card from 'Temp_Safe' to trigger the Audio Writer alarm if temperatures ever breach the limit.

How it works

Integrated Dynamics operates on lazy evaluation: variables inside a Variable Store do not compute anything on their own until a Writer or Display Panel actively requests their output. Every tick, the Redstone Writer evaluates the 'Enable_Reactor' card. This forces the network to check the 'And' card, which in turn queries the 'Need_Power' and 'Temp_Safe' comparison cards, pulling live data from the Machine Reader and Block Reader in real time.

By reading the Block NBT directly via the Block Reader, this setup bypasses the sluggish comparator outputs of standard modded reactors. It parses the exact internal heat integer or double value from the tile entity data. If the energy buffer exceeds 85% capacity, or if the internal reactor temperature crosses the programmed safety threshold, the 'And' gate immediately flips to false, cutting the redstone signal within a single server tick.

Meanwhile, the Display Panels independently evaluate string-formatted versions of your base variables, giving you a live dashboard of exact FE percentages, fuel reserves, and core temperatures. The Audio Writer remains dormant until the '!Temp_Safe' condition resolves to true, firing a warning sound effect to alert players in the area of a cooling failure.

Upgrades and scaling

  • Replace the simple 85% threshold with a full SR Latch using the 'Choice' operator so the reactor turns on at 20% power and stays on until reaching 95% capacity, preventing rapid on/off flickering.
  • Add Integrated Tunnels Item Interfaces and Item Exporters to automatically inject emergency coolant items or eject fuel rods when the '!Temp_Safe' boolean triggers.
  • Replace physical cable runs between the reactor room and control room with a pair of Mono-Directional Connectors or Omni-Directional Connectors to keep blast walls completely sealed.

Common mistakes

  • Leaving dependent Variable Cards in your player inventory instead of placing them inside the Variable Store, which causes the Writer to display a missing variable error.
  • Creating a new copy of a base Variable Card in the reader instead of referencing the existing one, which breaks the logic chain because each card has a unique internal ID.
  • Forgetting to use the Labeller on every step of the logic tree, resulting in a Variable Store full of identical-looking cards that are impossible to debug.
  • Mismatching number types in the Logic Programmer (such as comparing an Integer NBT tag against a Double constant without using a Cast operator or generalized Number operator).

FAQ

Why does my Redstone Writer have a red error symbol?

One or more Variable Cards required to calculate your final boolean are missing from the Variable Store, or the network lacks power from an Energy Battery.

How do I find the exact NBT tag name for my reactor's heat?

Place the raw 'Block NBT' card from the Block Reader directly into a Display Panel; it will render the entire JSON-like NBT tree on screen so you can read the exact key names.

How do I stop my reactor from rapidly toggling on and off right at 85% battery?

Most readers update every single tick; open the Redstone Writer GUI, click the settings gear icon, and increase the tick interval delay, or program a two-threshold hysteresis loop.

More Integrated Dynamics designs

Integrated Dynamics · Mid gameAutomated Botania Mana & Livingrock Production LineThis mid-game cross-mod automation setup pairs Integrated Dynamics and its standard addons with Botania's Pure Daisy to effortlessly produce Livingrock and Livingwood. By utilizing World Block Exporters, World Block Importers, and Block Readers, it monitors block states in real-time to place raw materials and harvest the transmuted results the exact tick they finish converting. Building this removes the tedious manual placement required for foundational Botania crafting and mana generation infrastructure.Intermediate8 steps
Integrated Dynamics · Mid gameCentral Storage & Auto-Crafting HubThis setup provides a complete Applied Energistics 2 alternative using Integrated Dynamics alongside its official addons: Integrated Terminals, Integrated Tunnels, and Integrated Crafting. It binds a massive array of standard chests into a single searchable UI while enabling on-demand recursive auto-crafting using a fraction of the power and resources required by conventional digital storage mods.Intermediate8 steps
Integrated Dynamics · Early gameMax-Tick-Rate Cobbleworks & Menril Power PlantThis early-game setup leverages Integrated Dynamics and its addon, Integrated Tunnels, to create an ultra-fast cobblestone and Menril wood farm. By overriding the default operation speed of World Block Importers and Exporters down to a single tick, this compact facility generates infinite stone resources while harvesting its own Menril trees to keep a battery bank permanently charged.Beginner6 steps
Integrated Dynamics · Mid gameNBT-Filtered Mob Farm Loot Sorter & RecyclerHigh-yield mob farms quickly choke standard storage systems with damaged bows, leather armor, and randomly enchanted gear. This Integrated Dynamics setup inspects the exact NBT data and damage tags of incoming drops in real-time to separate valuable stackables, enchanted gear, and recyclable equipment. By automating the evaluation of complex item properties at zero energy cost for the logic network, you keep your storage clean while salvaging iron and gold from trash drops.Intermediate6 steps
Integrated Dynamics · End gameScripted Multi-Step Ore Processing FactoryThis endgame ore processing facility uses Integrated Dynamics and its companion addons (Integrated Tunnels and Integrated Scripting) to dynamically route raw ores across arrays of Mechanical Squeezers and Mechanical Drying Basins. By replacing messy Variable Card chains with a centralized JavaScript program on a Scripting Drive, the system calculates real-time inventory load balancing to eliminate machine idling and maximize ingot yields. It is the ultimate tick-efficient, zero-bottleneck refining solution for high-tier quarry inputs.Advanced8 steps