Buildcraft · Mid game

Automated Fuel Refinery & Iron Tank Power Plant

This mid-game power plant automates the extraction and refinement of Crude Oil into high-efficiency Fuel to run a scalable bank of Combustion Engines. By combining BuildCraft's classic fluid logistics with high-capacity multi-block storage tanks, it solves early-game energy shortages and provides steady Minecraft Joules (MJ) for power-hungry quarries and assembly tables. A dedicated self-cooling loop ensures your engines run continuously without the risk of catastrophic overheating.

Footprint
15x11x7 blocks
Power
~36 MJ/t net output (6 Combustion Engines, check JEI for modpack tweaks)
Throughput
Continuous refined Fuel production
Difficulty
intermediate

Flow diagram

How items, fluids and energy move through the setup, left to right.

Swipe sideways to see the whole diagram

Crude OilCrude OilRefined FuelRefined FuelWater (Coolant)Fuel & WaterMJ EnergyMJ Feedback LoopRedstone Control SignaNet MJ PowerOil Pump & RedstoneEnginesINPUTCrude Oil Tank PillarSTORAGERefinery ArrayMACHINERefined Fuel Tank PillarSTORAGEWater Pump & AqueousReservoirINPUTGold Fluid PipesLOGISTICSCombustion Engine ArrayPOWERIron & Gold KinesisPipesLOGISTICSAutarchic Gates & PipeWireCONTROLBase Power Grid (Output)OUTPUT
InputMachinePowerStorageLogisticsOutputControlFluidEnergySignal

Materials

ItemCount
Pump2
Redstone Engine8
Combustion Engine6
Refinery2
Tank20
Wooden Fluid Pipe4
Gold Fluid Pipe32
Cobblestone Fluid Pipe16
Pipe Sealant16
Wooden Kinesis Pipe6
Gold Kinesis Pipe24
Iron Kinesis Pipe2
Autarchic Iron Or Gate2
Basic Gate6
Red Pipe Wire16
Lever10
Wrench1

Build it step by step

  1. 1Establish the Infinite Water Supply

    Dig a 3x3x1 pit near your power plant and fill it with water source blocks to create an infinite reservoir. Place one Pump directly above the center block and surround it with four Redstone Engines. Activate the engines with Levers and run Cobblestone Fluid Pipes from the Pump toward your engine bay; this will serve as your dedicated cooling line.

  2. 2Deploy the Oil Extraction Rig

    Locate an Oil Spring or desert oil spout and place your second Pump directly above the central oil column. Surround it with four Redstone Engines to provide the baseline pumping energy without consuming valuable fuel. Connect Wooden and Gold Fluid Pipes to bring the Crude Oil back to your main facility.

  3. 3Erect the Storage Tank Pillars

    Build two vertical pillars of BuildCraft Tanks, each 10 blocks tall, spaced four blocks apart (or assemble a multi-block Iron Tank if your modpack includes compatible tank addons). The first pillar will buffer incoming Crude Oil, while the second will store refined golden Fuel. Feed the incoming Crude Oil pipe directly into the top block of the first tank pillar.

  4. 4Install the Refinery Array

    Place two Refineries on the ground between your two tank pillars. Attach a Wooden Fluid Pipe to the bottom block of the Crude Oil tank, equip it with an Autarchic Gate (or a Redstone Engine), and route Gold Fluid Pipes into the sides of both Refineries. Set the Autarchic Gate condition to 'Fluid in Tank -> Energy Pulser' to automatically draw oil into the machines.

  5. 5Pipe Refined Fuel to Storage

    Attach Wooden Fluid Pipes to the front output faces of both Refineries, equipping another Autarchic Gate or Redstone Engine to pump the product out. Route Gold Fluid Pipes from these outputs up to the top of your second Tank pillar. Use Pipe Waterproofing / Pipe Sealant on any adjacent pipes to prevent Crude Oil and Refined Fuel lines from accidentally merging.

  6. 6Construct the Combustion Engine Line

    Place six Combustion Engines in a straight row with two blocks of space behind them for fluid routing. Attach Wooden Kinesis Pipes to the front (piston side) of each engine. Connect all the Wooden Kinesis Pipes together into a single spine of Gold Kinesis Pipes to handle the combined MJ throughput with minimal energy loss.

  7. 7Plumb Fuel and Coolant Lines

    Run a Gold Fluid Pipe line from the bottom of your Refined Fuel tank along the underside of the Combustion Engines. Run your Cobblestone Fluid Pipe water line along the back of the engines. Use Pipe Sealant to ensure the parallel water and fuel pipes do not connect to each other, allowing both fluids to enter the engines simultaneously.

  8. 8Connect the Power Feedback Loop and Controls

    Branch an Iron Kinesis Pipe off your main Gold Kinesis spine to split power: route one branch back to the Refineries to keep them running, and send the main line out to your base. Finally, place Basic Gates on the Kinesis Pipes attached to each Combustion Engine, strung together with Red Pipe Wire. Configure the Gates to output a Redstone Signal only when the engine is 'Blue' or 'Green' stage and water is present, shutting them down automatically if they ever reach the dangerous 'Yellow' or 'Red' heat stages.

How it works

The system operates as a closed-loop self-sustaining energy plant. Crude Oil is pulled from natural deposits using zero-upkeep Redstone Engines, buffering into a tall vertical Tank stack. From there, it enters the Refineries, which consume a hefty amount of MJ energy to crack the heavy black oil into golden Fuel. While Crude Oil can be burned directly in Combustion Engines, refining it first dramatically increases both the MJ/t output and the total burn time per bucket, yielding a massive net energy gain even after subtracting the power required to run the Refineries.

Combustion Engines generate high energy density, but they also generate heat that must be actively dissipated with Water. By placing the water extraction Pump on dedicated Redstone Engines rather than powering it from the main MJ grid, the coolant supply remains immune to main grid brownouts. Even if you drain the main power line dry with a Quarry, the water pump will never stall, preventing a thermal runaway explosion.

Logistics control is handled by BuildCraft Gates and Pipe Wire. The Autarchic Gates eliminate the clunky footprint of external Redstone Engines on wooden extraction pipes by generating internal extraction pulses whenever fluid is detected. Meanwhile, the Basic Gates mounted on the engines act as a fail-safe thermostat, cutting the redstone ignition signal the moment an engine heats up past safe operating temperatures.

Upgrades and scaling

  • Upgrade the basic vertical glass Tanks to multi-block Iron Tanks or Steel Tanks if your modpack includes Railcraft or Buildcraft Additions, increasing storage capacity to hundreds of buckets.
  • Replace the two Refineries with a multi-block Heat Exchanger and Distiller setup (in newer BuildCraft versions or Buildcraft Additions) to separate oil into multiple specialized gaseous and liquid fuels for higher efficiency.
  • Swap the Gold Fluid and Kinesis Pipes for Quartz or Diamond variants to increase flow capacity and filter directions as you scale the array from 6 to 18+ Combustion Engines.
  • Integrate an Ender Tank at the oil input node so you can move your remote oil pump across different desert biomes without laying hundreds of blocks of fluid pipe.

Common mistakes

  • Forgetting to apply Pipe Sealant between parallel Water and Fuel pipes, causing the lines to connect and block fluid flow into the engines.
  • Powering the cooling water Pump using energy from the Combustion Engines themselves; if fuel runs out and returns later, or if the grid overloads, the water stops and the engines explode.
  • Using Stone or Cobblestone Kinesis Pipes for the main spine, which have low MJ/t transfer limits and will bottleneck or overload once all six engines warm up.
  • Routing the output of the Refineries using standard fluid pipes instead of starting with a Wooden or Emerald extraction pipe, leaving the refined fuel trapped inside the machine.

FAQ

How Do I Kickstart the Refineries If I Have No Refined Fuel Yet?

Pump a single bucket of raw Crude Oil directly into one Combustion Engine (along with water) and turn it on. Crude Oil burns inefficiently, but it will generate more than enough initial MJ to refine your first few buckets of golden Fuel, after which the system becomes self-sustaining.

Why Are My Combustion Engines Turning Red and Stopping?

If an engine reaches the red stage, it has critically overheated due to a lack of water. Do not simply flip the lever again; break the engine with a Wrench and re-place it, or hit it with a Wrench depending on your BuildCraft version, after fixing your water pump throughput.

How Many Combustion Engines Can One Refinery Support?

In most standard BuildCraft versions, a single Refinery running at full speed (powered by at least 10-12 MJ/t) produces enough Fuel to continuously run around 8 to 10 Combustion Engines. Check JEI in your specific modpack for exact fluid consumption rates.

More Buildcraft designs