Pipez · Early game
Compact Single-Block Smelting & Fueling Array
This Compact Single-Block Smelting & Fueling Array revolutionizes early-game ore processing by eliminating the bulky, three-sided hopper chains required in vanilla Minecraft. Using the Pipez mod alongside Pipe Upgrades and Filter Destination Tools, you can feed raw ores, supply coal, and extract finished ingots from a furnace bank using only a single row of pipes behind the machines. This keeps the front of your wall completely flush and clean while maximizing processing speed in tight starter bases.
- Footprint
- 6x2x2 blocks
- Power
- 0 FE/t (Solid Fuel)
- Throughput
- ~0.8 items/sec (with 4 Blast Furnaces)
- Difficulty
- beginner
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Universal Pipe (or Item Pipe) | 6 |
| Blast Furnace (or Vanilla Furnace) | 4 |
| Chest (or Barrel) | 3 |
| Advanced Pipe Upgrade | 6 |
| Wrench (Pipez) | 1 |
| Filter Destination Tool | 2 |
Build it step by step
1Place the Furnace & Storage Row
Place your 4 Blast Furnaces in a straight horizontal line facing toward you. On the left side of the furnace row, place your Input Chest for raw ores and stack the Fuel Chest directly on top of it. On the far right end of the furnace row, place your Output Chest.
2Run the Single-Block Pipe Line
Walk behind the setup and run a line of 5 Universal Pipes directly behind the 4 Blast Furnaces and the Output Chest. Place one more Universal Pipe extending upward behind the two stacked input chests so that every container and furnace touches the pipe network.
3Set Extraction Points with the Wrench
Equip your Pipez Wrench and crouch-right-click the pipe connections attached to the Input Chest, the Fuel Chest, and all 4 Blast Furnaces. You will see a wide flange appear on these connections, indicating they are now set to extract items. Leave the connection to the Output Chest untouched so it remains an insertion-only destination.
4Install Advanced Pipe Upgrades
Right-click each of the 6 extracting pipe connections and insert an Advanced Pipe Upgrade into their upgrade slots. While lower-tier upgrades exist, the Advanced Pipe Upgrade (check JEI for the exact redstone and diamond recipe) is the lowest tier that unlocks item filtering and distribution modes, which are mandatory for this single-block design.
5Bind the Filter Destination Tools
Standard furnaces require ores to enter from the top face and fuel to enter from any horizontal side face. Take your first Filter Destination Tool and right-click the top face of one Blast Furnace to bind it to the 'Up' direction. Take your second Filter Destination Tool and right-click the back face of a Blast Furnace to bind it to that horizontal cardinal direction.
6Configure Ore and Fuel Routing
Open the pipe GUI on the Fuel Chest connection, click Add Filter, place a piece of Coal in the item slot, and insert the horizontally-bound Filter Destination Tool into the destination slot. Next, open the pipe GUI on the Ore Input Chest connection, click Add Filter, place your Raw Ore (or use the item tag #forge:raw_materials), and insert the 'Up' Filter Destination Tool. Set the distribution mode on the Ore pipe to Round Robin so ores split evenly across all 4 furnaces.
7Filter the Furnace Outputs
Because the pipe touches the back face of the Blast Furnaces, it will try to pull coal right back out of the fuel slot unless filtered. Open the pipe GUI on each of the 4 Blast Furnace connections, click Add Filter, set the filter mode to Blacklist (Inverted), and add Coal or Charcoal to the filter. The pipes will now ignore the fuel and only extract finished ingots from the output slot, routing them straight into the Output Chest.
How it works
In vanilla Minecraft, automating a furnace requires touching three distinct block faces: the top face for smeltable inputs, a side face for fuel, and the bottom face to extract the finished product. The Pipez mod bypasses this spatial limitation through two powerful mechanics: simultaneous input/output on a single connection, and virtual face spoofing via the Filter Destination Tool.
When you insert a Filter Destination Tool into an Advanced Pipe Upgrade's filter rule, the pipe does not just send the item to a specific block—it injects the item as if it were entering from the exact block face stored on the tool. Even though our Universal Pipe is physically attached only to the back face of the Blast Furnace, the Ore Chest pipe connection injects raw ores virtually into the top face, while the Fuel Chest connection injects coal into the back face.
Meanwhile, the pipe connections directly on the furnaces are set to extract. By blacklisting fuel items on these four connections, the Pipez extraction logic skips the fuel slot entirely and pulls only from the furnace output slot. Since the Output Chest is the only valid unfiltered inventory on the network, all smelted ingots immediately travel there without accidentally looping back into the furnaces.
Upgrades and scaling
- Upgrade theBlast Furnaces to modded electric furnaces (such as Mekanism Energized Smelters or Thermal Redstone Furnaces) later on; because you are already using Universal Pipes, you can hook a power generator directly to the same pipe line to transmit FE alongside the items.
- Replace the Advanced Pipe Upgrades with Ultimate Pipe Upgrades to extract entire stacks at once every few ticks, allowing a single pipe line to keep up with dozens of fast modded furnaces.
- Replace the manual Ore Input filter with the general forge tag ( such as #forge:raw_materials or #c:raw_materials depending on your modpack version, check JEI for exact tags) so the array automatically routes any new modded ore you toss into the chest.
Common mistakes
- Using Basic or Improved Pipe Upgrades instead of Advanced Pipe Upgrades; the first two tiers only increase transfer speed and do not unlock the Filter UI required to prevent items from mixing up.
- Forgetting to blacklist Coal on the furnace extraction connections, which results in the furnace pipes immediately pulling the fuel out of the furnaces and dumping it into your ingot Output Chest.
- Setting theOutput Chest pipe connection to extract with the Wrench, which deadlocks the system because there is no valid destination left on the pipe network.
- Clicking the wrong face when binding the Filter Destination Tool; always check the tooltip of the tool in your inventory to verify it recorded the 'Up' face for ores and a horizontal face (North/South/East/West) for fuel.
FAQ
Why do I need Universal Pipes instead of regular Item Pipes?
You can actually build this exact early-game setup using standard Item Pipes to save resources! However, starting with Universal Pipes makes the build future-proof, allowing you to pump Forge Energy (FE) through the exact same blocks when you transition to electric furnaces.
Do I need a separate Filter Destination Tool for every single furnace in the row?
No. When you click a block with the Filter Destination Tool without crouching, it only records the directional face (like 'Up'), not the specific coordinates of that single furnace. One tool set to 'Up' will allow the pipe to feed the top slot of all four furnaces simultaneously.
Why are all my ores only going into the first Blast Furnace?
Pipez defaults to 'Nearest First' routing mode. Open the pipe connection GUI on your Ore Input Chest and click the distribution button to switch it to 'Round Robin' so items are distributed equally across all connected furnaces.