Ender IO · Mid game
Ender IO Powered Spawner Mob Grinder & Soul Binder Factory
This mid-game Ender IO facility combines an automated dark-room Powered Spawner mob grinder with an integrated Soul Binder factory. It uses Killer Joes to harvest both rare mob drops and liquid experience, immediately routing those resources to automate the creation of Broken Spawners, Ender Crystals, and Enticing Crystals. Building this setup ensures a limitless supply of experience and mob-specific components required for high-tier Ender IO machinery.
- Footprint
- 9x9x6 blocks
- Power
- ~2,000 to 5,000 µI/t (depends on mob type and capacitors; check JEI)
- Throughput
- 2-6 mobs/cycle, ~1 Soul Binder craft/15s
- Difficulty
- intermediate
Flow diagram
How items, fluids and energy move through the setup, left to right.
Swipe sideways to see the whole diagram
Materials
| Item | Count |
|---|---|
| Powered Spawner | 1 |
| Killer Joe | 1 |
| Attractor Obelisk | 1 |
| Vacuum Chest | 1 |
| XP Vacuum | 1 |
| Experience Obelisk | 1 |
| Soul Binder | 1 |
| Slice'N'Splice | 1 |
| The Vat | 1 |
| Vibrant Capacitor Bank | 2 |
| Dark Steel Sword | 1 |
| Double-Layer Capacitor | 5 |
| Ender Fluid Conduit | 16 |
| Item Conduit | 24 |
| Energy Conduit | 20 |
| Dark Clear Glass | 64 |
| Dark Steel Bars | 6 |
| Chest | 3 |
| Soul Vial | 8 |
| Basic Item Filter | 3 |
Build it step by step
1Construct the Dark Room
Build a 7x7x5 hollow chamber using solid blocks for the floor and ceiling, and Dark Clear Glass for the walls. Dark Clear Glass allows you to observe the grinder while blocking all external light so mob spawning isn't hindered.
2Mount the Powered Spawner
Place the Powered Spawner suspended in the exact center of the room, two blocks above the floor. Ensure it is bound to your desired mob type (such as Endermen or Wither Skeletons) via an Anvil and equipped with at least a Double-Layer Capacitor. Run Energy Conduits from your Capacitor Bank through the ceiling to power it.
3Install the Killer Joe & Attractor Zone
Cut a 1x2 hole in the center of one wall at floor level and place the Killer Joe facing inward, placing Dark Steel Bars around him to prevent baby mobs from escaping. Inside the room directly in front of Killer Joe, place the Attractor Obelisk below the floor block and load it with Soul Vials matching your spawned mobs to pull them straight into the blade.
4Set Up Nutrient Distillation Brewing
Outside the room, place The Vat and connect it to an infinite water source alongside your main power grid. Pipe Rotten Flesh and Sugar (or Mushrooms) into The Vat to brew Nutrient Distillation, then run an Ender Fluid Conduit directly into the back of the Killer Joe. Insert an enchanted, empowered Dark Steel Sword into Killer Joe's inventory.
5Place Vacuum Collection Systems
Directly beneath the kill zone floor, place a Vacuum Chest and an XP Vacuum side by side. Prime the XP Vacuum with a splash of Liquid XP (or use a rod of return/bucket) so it begins absorbing orbs through the floor blocks. Connect the Vacuum Chest to an outside Loot Storage Chest using Item Conduits.
6Connect the Experience Obelisk
Place the Experience Obelisk next to your external crafting area. Run Ender Fluid Conduits from the XP Vacuum to the Experience Obelisk, setting the conduit at the vacuum to always extract. The Obelisk can hold a virtually limitless amount of Liquid XP and acts as the central fluid buffer.
7Integrate the Soul Binder & Slice'N'Splice
Place the Soul Binder and Slice'N'Splice adjacent to the Experience Obelisk and connect them to your Energy Conduits. Use Ender Fluid Conduits to push Liquid XP from the Experience Obelisk into the Soul Binder. Set up a Supply Chest connected via Item Conduits to feed filled Soul Vials, Vibrant Crystals, and Broken Spawners into the Soul Binder.
8Configure Item Filters and Recycling
Install a Basic Item Filter on the Loot Storage Chest conduit to automatically route Rotten Flesh and Skulls back to The Vat for self-sustaining Nutrient Distillation. Set the Soul Binder's internal IO configuration to push finished crystals and empty Soul Vials back into your storage chest.
How it works
The core loop relies on the synergy between the Powered Spawner, the Attractor Obelisk, and the Killer Joe. Because Ender IO's Powered Spawner still checks light levels for most hostile mobs, the Dark Clear Glass room ensures optimal spawn rates. Once mobs appear, the Attractor Obelisk overrides their AI pathfinding, dragging them directly into the 5x5x3 attack frontal cone of the Killer Joe. eliminates the need for vector plates, water streams, or conveyor belts.
Killer Joe simulates a player attack using the provided Dark Steel Sword and consumes Nutrient Distillation on every swing. Because it counts as a player kill, mobs drop rare loot (such as Wither Skeleton Skulls) and experience orbs. The under-floor XP Vacuum and Vacuum Chest instantly pull items and orbs through solid blocks, keeping the kill zone free of entity lag. Rotten flesh collected from zombies or skeletons is looped back into The Vat, creating a closed-loop fuel cycle for Killer Joe.
Finally, all harvested Liquid XP is centralized in the Experience Obelisk and piped directly into the Soul Binder. The Soul Binder requires massive amounts of experience and filled Soul Vials to craft advanced components like Ender Crystals, Enticing Crystals, and re-programmed Broken Spawners. By placing the Soul Binder and Slice'N'Splice directly on the grinder's output line, mob heads and XP are immediately converted into Z-Logic Controllers and Tormented Enderman heads without manual fluid bucketing.
Upgrades and scaling
- Upgrade all machines with Octadic Capacitors to maximize the Powered Spawner's spawn rate, expand the Attractor Obelisk's pull radius, and speed up the Soul Binder.
- Enchant the Dark Steel Sword with Looting III, Sharpness V, Mending, and Unbreaking III, and upgrade it with Empowered IV. The Mending enchantment will automatically draw XP orbs from the kill floor to keep the sword at 100% durability forever.
- Swap the Powered Spawner into 'Capture' mode temporarily when you need to automatically refill empty Soul Vials, using Item Conduits to cycle vials between the Spawner and the Soul Binder.
- Add a second Powered Spawner in the ceiling above the first one with a different mob type, and place a matching Soul Vial inside the Attractor Obelisk to farm two mob types simultaneously.
Common mistakes
- Using standard glass instead of Dark Clear Glass, which lets light into the chamber and halts hostile mob spawning.
- Forgetting to prime the XP Vacuum with a small amount of Liquid XP first; without an initial fluid charge, it will not pull in XP orbs.
- Allowing the Dark Steel Sword to break by forgetting the Mending enchantment—Killer Joe does not stop swinging when a tool reaches low durability unless you automate weapon extraction.
- Failing to configure the Attractor Obelisk with the specific Soul Vials of the mobs you are spawning; it only pulls mobs that are explicitly listed in its inventory.
- Starving your main base power grid by inserting an Octadic Capacitor into a Wither Skeleton or Enderman Powered Spawner before upgrading your power generation (check JEI or the block tooltip for exact µI/t multipliers).
FAQ
Why is my Killer Joe not attacking the mobs in front of him?
Check two things: first, ensure its internal tank is at least 70% full of Nutrient Distillation, as it requires a minimum fluid threshold to operate. Second, make sure there is a valid weapon inside its slot and no solid blocks blocking line-of-sight to the mobs' feet.
How do I automate filling the Soul Vials for the Soul Binder?
You can toggle the Powered Spawner's UI from 'Spawn' mode to 'Capture' mode. Pipe empty Soul Vials into the spawner, and it will consume power to generate filled Soul Vials of its bound mob, which you can then pipe directly into the Soul Binder.
Can Wither Skeletons or Endermen escape this grinder?
Endermen can teleport when damaged unless you upgrade the Dark Steel Sword with the 'Ender' empowerment (or use a Dark Steel Sword which inherently blocks Enderman teleportation on hit in Ender IO). Wither Skeletons cannot escape as long as the enclosure walls are solid or made of Dark Clear Glass.