Create · Setup guide · Intermediate

Create Logistics & Storage Guide: Belts, Funnels, Tunnels, and Item Vaults

In this guide, you will learn how to build an automated, scalable storage and sorting network in the Create mod using Mechanical Belts, Brass Funnels, Tunnels, Smart Chutes, and Item Vaults. Mastering these logistics components allows you to process massive factory outputs efficiently without drowning in disorganized chests or suffering from laggy hopper chains.

What you need

  • Rotational power source (e.g., Water Wheels, Windmill Bearing, or Steam Engine)
  • Shafts, Cogwheels, and Gearboxes for routing rotational power
  • Dried Kelp (crafted into Mechanical Belts)
  • Andesite Alloy and Brass Ingots (for Funnels, Tunnels, and Chutes)
  • Electron Tubes (required for Brass-tier smart components)
  • Iron Sheets and Barrels (to craft Item Vaults)
  • Wool and Nuggets (Iron or Brass, for List Filters and Attribute Filters)
  • Wrench and Engineer's Goggles

Step by step

  1. 1Construct the Item Vault Core

    Begin by placing down Item Vaults to serve as your high-capacity bulk storage buffer. Item Vaults automatically connect to form larger multiblock structures; they can expand up to a 3x3 cross-section and extend for a significant length (check the in-game Ponder guide for exact maximum dimensions). Unlike standard chests, players cannot open an Item Vault's GUI directly, making them ideal as a central backbone or overflow silo that machines interact with exclusively.

    Tip: Wear Engineer's Goggles or connect a Display Link to a Nixie Tube to monitor the current contents of your Item Vaults.

  2. 2Lay the Mechanical Belt Highway

    Place two Shafts in a straight line along the side of your Item Vaults or storage chests, ensuring both shafts face the same axis. Hold a Mechanical Belt in your hand, right-click the first shaft, and then right-click the second shaft to stretch the belt between them. Connect one of the end shafts to your rotational power network using Cogwheels or Gearboxes so the belt moves continuously from your input drop-off point toward the storage containers.

    Tip: You can right-click the middle of an existing belt with an additional Shaft to add support points or tap rotational power off the line.

  3. 3Attach Input and Output Funnels

    Place an input chest or barrel at the start of your belt and attach a Funnel to its side facing the belt so items flow out onto the moving line. Next, crouch and right-click Brass Funnels onto the side of your Item Vaults or sorting chests directly above the belt. Look closely at the directional arrow on each Funnel sitting over a belt; if the arrow points away from the container, right-click it with a Wrench to flip it so it pulls items off the belt and pushes them into storage.

    Tip: Andesite Funnels only move items one by one, whereas Brass Funnels can move up to a full stack at once and feature a filter slot.

  4. 4Configure List and Attribute Filters

    To sort dozens of unique items cleanly, craft List Filters (made with Iron Nuggets and Wool) or Attribute Filters (made with Brass Nuggets and Wool). Right-click while holding a Filter in your hand to open its configuration screen: drag ghost items from your recipe viewer (such as JEI, REI, or EMI) into a List Filter, or place a sample item into an Attribute Filter to select shared traits like 'can be smelted' or 'belongs to a specific mod'. Finally, right-click the configured filter directly into the value frame on the top edge of a Brass Funnel.

    Tip: Hold right-click on the filter slot of a Brass Funnel or Smart Chute to scroll and set the exact stack size required before an extraction or insertion occurs.

  5. 5Route Parallel Lines with Brass Tunnels

    If your storage hall uses multiple parallel belts, place Brass Tunnels directly over adjacent Mechanical Belts so they seamlessly link together into a single multiblock housing. Place Filters into the side or outgoing flaps of the Brass Tunnels to direct specific items onto specific parallel belts. Furthermore, you can use your Wrench on the top window of the Brass Tunnel multiblock to change its distribution behavior between Split, Round Robin, or Synchronize Inputs.

    Tip: Use an Andesite Tunnel on a single belt if you simply want to peel off a single item from every passing stack onto an adjacent perpendicular belt.

  6. 6Install Smart Chutes for Vertical Logistics

    For vertical item movement—such as pulling raw materials out of an overhead Item Vault down onto a belt, or dropping unsorted overflow down to an incinerator—place Smart Chutes directly beneath or above your inventories. By default, Chutes pull items downward using gravity, and Smart Chutes allow you to apply a Filter and set an exact extraction stack size just like Brass Funnels. If you ever need to move items upward through a chute network, place an Encased Fan at the bottom facing up or at the top pulling air upward.

    Tip: Applying a Redstone signal directly to a Smart Chute or Funnel immediately locks it, giving you an easy way to pause extraction when an inventory gets full.

  7. 7Add an Overflow Loop or Bulk Silo

    At the very end of your sorting belt line, place an unfiltered Brass Funnel leading into a massive Item Vault or a secondary buffer chest. Any item that does not match the specific filters along your main sorting wall will ride the belt to the end and safely enter this bulk catch-all container. This prevents unrecognized items from piling up at the end of the belt and halting the entire conveyor line.

    Tip: Attach a Stockpile Switch (Threshold Switch) to your overflow vault to trigger a warning lamp or alarm bell when it reaches 80% capacity.

How it works

Create's logistics system relies on physical simulation and active inventory polling rather than instantaneous digital teleportation. A Mechanical Belt operates as a physical transport medium whose transfer speed scales directly with the RPM (Rotations Per Minute) of the driving shaft. When an item stack lands on a belt, it physically occupies space on that segment; if the destination inventory is full or blocked, the items back up along the belt sequentially, providing a natural, lag-friendly backpressure mechanism.

Brass-tier logistics blocks (Brass Funnels, Brass Tunnels, and Smart Chutes) introduce conditional logic through their built-in filter frames. When an item passes underneath a Brass Funnel mounted above a belt, the funnel evaluates the item against its internal filter slot. If the item matches the item ID (via a List Filter) or the item metadata/tag (via an Attribute Filter), the funnel immediately intercepts the stack and inserts it into the attached inventory before the belt can carry it further downstream.

Tunnels expand this belt logic horizontally across multiple lanes. While an Andesite Tunnel only splits single items off passing stacks onto side outputs, a series of connected Brass Tunnels acts as an intelligent junction box. It temporarily holds incoming items from all connected entry belts, evaluates any filters placed on its exit flaps, and distributes the items across the parallel outgoing belts according to the distribution rule selected on its top face.

Common mistakes

  • Using Andesite Funnels for bulk extraction: Andesite Funnels only extract one item at a time onto a belt, severely bottlenecking high-speed farms. Always upgrade to Brass Funnels or Smart Chutes when moving full stacks.
  • Leaving Funnel arrows pointing the wrong way: When placed directly on a belt, a Funnel adjusts its direction automatically, which might be the opposite of what you want. Always verify the arrow on the Funnel housing and flip it with a Wrench if items are flowing backward.
  • Trying to open an Item Vault manually: New players often think their Item Vault is bugged because right-clicking it does nothing. Remember that Item Vaults have no player GUI and must be accessed via Funnels, Chutes, or Portable Storage Interfaces.
  • Forgetting an unfiltered overflow at the end of the belt: If an item matches no filters on your sorting wall and reaches the end of a dead-end belt, it will sit there indefinitely and block subsequent items from reaching the final funnels.

FAQ

How do I view or grab items stored inside an Item Vault?

Since Item Vaults have no GUI, attach a Brass Funnel or Smart Chute to extract specific filtered items into an accessible chest, or use a Display Link connected to a Display Board to read the vault's inventory list.

Why is my Brass Funnel or Smart Chute not extracting any items?

Check three things: ensure the directional arrow points out of the container, check if the block is accidentally powered by an adjacent Redstone signal (which locks it), and verify that the configured stack size in the value frame isn't set to 'Exact' with a higher number than what is currently inside the chest.

What is the difference between a List Filter and an Attribute Filter?

A List Filter checks for specific, exact item types that you manually place into its grid (plus an option to match or ignore NBT data), whereas an Attribute Filter checks for broader shared properties like 'is food', 'is enchantable', or 'added by Create'.

Can Chutes move items upward without using Mechanical Belts?

Yes, if you place an Encased Fan at the bottom of a vertical Chute stack blowing upward (or at the top pulling air upward), the airflow will push items up through the Chutes against gravity.

By combining the high-speed transport of Mechanical Belts with the conditional logic of Brass Funnels, Tunnels, Smart Chutes, and Attribute Filters, you can build a reliable, self-sorting storage network around high-capacity Item Vaults.

More Create guides

Create · Getting startedCreate Getting Started Guide: First Steps to Andesite AgeWelcome to the Create mod, where kinetic rotation replaces magical single-block machines. In this guide, you will enter the Andesite Age by mining your first new resources, generating continuous rotational power with a Water Wheel, and setting up a Mechanical Press and Mechanical Mixer. Mastering these foundational blocks is essential, as they provide the metal sheets and alloys required for every advanced contraption in the mod.Beginner7 steps
Create · ExplainedCreate Rotational Power Explained: Stress Units (SU), RPM, and Gear RatiosMastering Rotational Power is the foundation of building functional factories in the Create mod. In this guide, you will learn how to balance Stress Units (SU), manipulate rotation speed (RPM) using gear ratios, and monitor your contraptions using Engineer's Goggles. Understanding these core mechanics ensures your machines run at peak speed without constantly locking up from being overstressed.Beginner7 steps
Create · ProgressionCreate Progression Guide: From Andesite to Brass and Precision MechanismsTransitioning from basic Andesite machinery to the Brass age is the most critical milestone in the Create mod. This guide will walk you through capturing a Blaze Burner, alloying Brass, and constructing a Sequenced Assembly line to mass-produce Precision Mechanisms. Mastering these steps unlocks smart filtering, high-tier logistics, and automated crafting.Intermediate8 steps
Create · PowerHow to Build a Max-Level Steam Engine in CreateIn this guide, you will learn how to construct and balance a maximum-level (Level 18) Steam Engine in the Create mod. Mastering this build will allow you to generate a massive 294,912 Stress Units (SU) from a single boiler, providing more than enough rotational power to run your entire factory.Intermediate8 steps
Create · AutomationHow to Build an Automated Ore Processing & Washing LineIn this intermediate guide, you will build a fully automated ore processing and washing line in the Create mod using Crushing Wheels and Encased Fans. This setup not only increases your yield from mined raw ores with valuable secondary byproducts, but also allows you to convert simple cobblestone into an infinite supply of iron and gold without burning a single piece of coal.Intermediate7 steps
Create · AutomationCreate Contraptions Explained: Super Glue, Bearings, and Auto-FarmsIn this guide, you will learn how to build moving contraptions in Create to fully automate crop and tree harvesting. Mastering the interaction between anchors, Super Glue, and Portable Storage Interfaces allows you to gather infinite resources with very little stress unit overhead.Intermediate8 steps