Create · Addon guide · Advanced

Create: Steam 'n' Rails & Big Cannons Addon Guide — Monorails and Artillery

This guide covers the advanced integration of Create: Steam 'n' Rails and Create Big Cannons, transforming your standard industrial base into an automated logistics and heavy defense network. You will learn how to construct suspended monorails, deploy automated Conductor entities, and cast, bore, and assemble multi-block artillery. Mastering these addons lets you move cargo across difficult terrain without ground clutter while defending your infrastructure with kinetic firepower.

What you need

  • Create base mod installed along with Create: Steam 'n' Rails and Create Big Cannons ( plus JEI, REI, or EMI to check exact alloy ratios)
  • Track Station, Train Controls, Train Casing, and Super Glue
  • Monorail Tracks and Narrow Gauge Tracks
  • Andesite Casing and Conductor Caps
  • Foundry Basin, Blaze Burners, Fluid Pipes, and Mechanical Pumps
  • Casting Sand and Cannon Cast Molds (Very Small, Small, Medium, and Cannon End)
  • Cannon Drill, Mechanical Piston, and Piston Extension Poles
  • Cannon Builder, Cannon Mount, Yaw Controller, and Quickfiring Breech
  • Powder Charges, Big Cannon Projectiles (such as Solid Shot or HE Shell), Fuzes, and a Ram Rod

Step by step

  1. 1Build a Suspended Monorail Network

    Craft Monorail Tracks and place them suspended in the air using support pillars or hanging brackets. Place a Track Station onto the monorail line and enter assembly mode to spawn a Monorail Bogey directly beneath the track. Unlike standard trains that sit on top of rails, attach your Train Casing, Train Controls, and storage containers below the bogey using Super Glue, ensuring no blocks clip into the upper track support structure.

    Tip: Use Phantom Tracks if you want to build an invisible floating sky-train for aesthetic builds, or Narrow Gauge Tracks for compact mining tunnels.

  2. 2Assemble and Assign a Conductor

    Place an Andesite Casing on the ground and right-click it with a Conductor Cap to bring a mechanical Conductor golem to life. Right-click the Conductor with a Train Schedule or seat it directly in front of your Train Controls on the assembled monorail. The Conductor acts as a dedicated operator and can also press buttons or flip levers inside your factory when colored caps match specific redstone targets.

    Tip: Give a Conductor a Toolbox to turn it into a mobile inventory assistant that follows you around the workshop.

  3. 3Prepare the Cannon Foundry and Sand Cast

    Set up a Foundry Basin heated by Blaze Burners to melt raw metals like Iron, Bronze, or Steel into liquid form (check JEI for exact melting temperatures and alloy recipes). While the metal melts, build a multi-block mold by placing Cannon Cast Molds in a vertical stack according to the barrel segments you need, and right-click them with Casting Sand. Once the sand conforms to the mold shape, remove the wooden mold frames to leave a hollow Casting Sand column.

    Tip: Always cast your cannon as one continuous multi-block piece if possible, or prepare to weld separate segments together later.

  4. 4Pour Molten Metal and Cool the Unbored Barrel

    Run Fluid Pipes and a Mechanical Pump from your Foundry Basin to the top open block of the Casting Sand column. Pump the molten metal into the sand cast until every layer fills completely. Wait for the metal to cool and solidify—indicated by the glowing orange texture turning dull—then break away the surrounding Casting Sand to reveal your solid, unbored cannon blocks.

    Tip: Never walk on top of an active, open sand cast while molten metal is pouring, as it causes severe fire damage.

  5. 5Bore the Cannon Barrel with a Cannon Drill

    A newly cast cannon is solid metal and must be hollowed out before use. Place a Cannon Drill facing the center axis of your unbored cannon blocks and attach Piston Extension Poles behind the drill head. Supply both rotational power and a continuous fluid supply of water via Fluid Pipes to the Cannon Drill to keep the bit cooled, then power it to slowly bore out the interior of the barrel segments.

    Tip: If the drill runs out of water mid-operation, it will stall and overheat; use a large Fluid Tank buffer before starting the boring process.

  6. 6Assemble the Multi-Block Cannon on a Mount

    Place a Cannon Mount on a solid foundation and attach a Yaw Controller beneath or beside it depending on the mount orientation. Use a Cannon Builder alongside Mechanical Pistons to push your bored barrel segments, chambers, and a Quickfiring Breech or Screw Breech together into a single aligned structure on top of the Cannon Mount. Once aligned, power the Cannon Mount with a redstone signal or wrench interaction to lock the individual blocks into a single rotatable artillery contraption.

    Tip: Use the in-game Ponder system on the Cannon Mount to see the exact block limits and chamber-to-barrel ratios for your specific metal tier.

  7. 7Load Ammunition and Fire

    Open the breech at the rear of the cannon and insert a Big Cannon Projectile (with a Fuze attached to its tip if using explosive shells) into the barrel opening. Push the projectile all the way forward to the end of the chamber using a Ram Rod, then insert the appropriate number of Powder Charges behind it and push them in as well. Close the breech, supply rotational power to pitch and yaw the barrel toward your target, and trigger the firing mechanism with a redstone pulse.

    Tip: Deploy Mechanical Arms to automate loading Quickfiring Breeches when mounting cannons onto a Steam 'n' Rails armored train.

How it works

Create: Steam 'n' Rails expands the base mod's spline-based track mathematics by introducing varied track profiles like Monorails and Narrow Gauge rails. The bogey hitbox and collision logic remain identical to standard Create trains, meaning the entire suspended carriage becomes a non-colliding contraption entity while moving, only snapping back to the voxel grid when disassembled at a Track Station.

Create Big Cannons operates on a structural stress and internal pressure calculation system. When you cast and bore a cannon, each material tier (such as Cast Iron, Bronze, or Steel) has a distinct strength rating and weight penalty. Thick-walled chamber blocks must be placed at the rear where combustion occurs, while thinner barrel blocks extend the front to increase muzzle velocity and reduce projectile spread.

When a cannon fires, the mod calculates the total explosive force of the loaded Powder Charges against the containment rating of the breech and chamber blocks. If the explosive force exceeds the material strength, or if a projectile is obstructed due to improper boring or incomplete ramming, the pressure fails to vent forward and causes a catastrophic breech explosion that destroys the cannon structure.

Common mistakes

  • Placing blocks above a Monorail Bogey when gluing a suspended train together, which causes the carriage to collide with the overhead track and fail assembly.
  • Forgetting to pump water into the Cannon Drill while boring a cast barrel, causing the drill to stall indefinitely without hollowing out the metal.
  • Loading too many Powder Charges into a low-tier Cast Iron chamber, which exceeds the material stress limit and blows up the cannon upon firing.
  • Failing to push the projectile and Powder Charges all the way to the front of the chamber with a Ram Rod, leaving an air gap that causes a misfire or barrel detonation.

FAQ

Can I mount a working Big Cannon onto a Steam 'n' Rails train?

Yes, standard and wide-gauge trains can carry assembled cannons on special Carriage Mounts or fixed mounts, allowing you to build functional armored artillery trains.

Why won't my Narrow Gauge train connect to my main railway?

Narrow Gauge tracks have a smaller rail spacing than standard Create tracks; you cannot directly link them and must use a transfer station with Mechanical Arms or Vaults to move cargo between gauges.

How do I know how many Powder Charges my cannon can safely handle?

Use the Ponder menu on your specific cannon material block (such as Bronze or Steel Cannon Chambers) to view its stress rating, and never place more charges than you have reinforced chamber blocks.

Can Conductors load cannons automatically?

No, Conductors are designed to pilot trains, carry toolboxes, and trigger redstone buttons or levers; use Mechanical Arms or Deployers to automate cannon loading.

By combining suspended monorail logistics and automated Conductors from Steam 'n' Rails with the precision foundry casting and boring mechanics of Create Big Cannons, you can build an advanced, heavily defended industrial rail network.

More Create guides

Create · ProgressionCreate Progression Guide: From Andesite to Brass and Precision MechanismsTransitioning from basic Andesite machinery to the Brass age is the most critical milestone in the Create mod. This guide will walk you through capturing a Blaze Burner, alloying Brass, and constructing a Sequenced Assembly line to mass-produce Precision Mechanisms. Mastering these steps unlocks smart filtering, high-tier logistics, and automated crafting.Intermediate8 steps
Create · PowerHow to Build a Max-Level Steam Engine in CreateIn this guide, you will learn how to construct and balance a maximum-level (Level 18) Steam Engine in the Create mod. Mastering this build will allow you to generate a massive 294,912 Stress Units (SU) from a single boiler, providing more than enough rotational power to run your entire factory.Intermediate8 steps
Create · AutomationHow to Build an Automated Ore Processing & Washing LineIn this intermediate guide, you will build a fully automated ore processing and washing line in the Create mod using Crushing Wheels and Encased Fans. This setup not only increases your yield from mined raw ores with valuable secondary byproducts, but also allows you to convert simple cobblestone into an infinite supply of iron and gold without burning a single piece of coal.Intermediate7 steps
Create · Setup guideCreate Auto-Crafting Guide: Mechanical Crafters & Sequenced AssemblyMastering advanced automation in Create requires moving beyond basic 3x3 crafting tables and simple conveyor belts. In this guide, you will learn how to wire a massive Mechanical Crafter array for oversized recipes like Crushing Wheels, and how to construct a compact, self-looping Sequenced Assembly line to automate complex components like Precision Mechanisms.Intermediate7 steps
Create · TroubleshootingCreate Troubleshooting Guide: Fixing Overstressed Networks, Direction & Jammed BeltsThis troubleshooting guide teaches you how to diagnose and repair the most common mechanical failures in the Create mod, including overstressed networks, broken shafts, jammed conveyor belts, and stuck contraptions. Mastering these fixes is essential for keeping your factories running smoothly without constant manual resets.Beginner6 steps
Create · Addon guideCreate: Crafts & Additions Guide — Converting SU to FE & Electric MotorsThis guide teaches you how to bridge kinetic Stress Units (SU) and electrical Forge Energy (FE) using the Create: Crafts & Additions addon. Mastering this conversion lets you power other tech mods using your kinetic contraptions and transmit mechanical power across your base cleanly via electrical wires instead of clunky shaft networks.Intermediate7 steps